The questions below are very technical. Feel free to ignore them {questions(technical)}*
+
+### voltage-socket:schuko
+
+The question is `What voltage do the plugs with Schuko wall plug without ground pin (CEE7/4 type F) offer?`
+*Schuko wall plug without ground pin (CEE7/4 type F) outputs {canonical(socket:schuko:voltage)}* is shown if `socket:schuko:voltage` is set
+
+ - *Schuko wall plug without ground pin (CEE7/4 type F) outputs 230 volt* is shown if with socket:schuko:voltage=230
+
+This tagrendering is only visible in the popup if the following condition is met: socket:schuko~.+ & socket:schuko!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:schuko
+
+The question is `What current do the plugs with Schuko wall plug without ground pin (CEE7/4 type F) offer?`
+*Schuko wall plug without ground pin (CEE7/4 type F) outputs at most {canonical(socket:schuko:current)}* is shown if `socket:schuko:current` is set
+
+ - *Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 16 A* is shown if with socket:schuko:current=16
+
+This tagrendering is only visible in the popup if the following condition is met: socket:schuko~.+ & socket:schuko!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:schuko
+
+The question is `What power output does a single plug of type Schuko wall plug without ground pin (CEE7/4 type F) offer?`
+*Schuko wall plug without ground pin (CEE7/4 type F) outputs at most {canonical(socket:schuko:output)}* is shown if `socket:schuko:output` is set
+
+ - *Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 3.6 kW* is shown if with socket:schuko:output=3.6 kW
+
+This tagrendering is only visible in the popup if the following condition is met: socket:schuko~.+ & socket:schuko!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:typee
+
+The question is `What voltage do the plugs with European wall plug with ground pin (CEE7/4 type E) offer?`
+*European wall plug with ground pin (CEE7/4 type E) outputs {canonical(socket:typee:voltage)}* is shown if `socket:typee:voltage` is set
+
+ - *European wall plug with ground pin (CEE7/4 type E) outputs 230 volt* is shown if with socket:typee:voltage=230
+
+This tagrendering is only visible in the popup if the following condition is met: socket:typee~.+ & socket:typee!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:typee
+
+The question is `What current do the plugs with European wall plug with ground pin (CEE7/4 type E) offer?`
+*European wall plug with ground pin (CEE7/4 type E) outputs at most {canonical(socket:typee:current)}* is shown if `socket:typee:current` is set
+
+ - *European wall plug with ground pin (CEE7/4 type E) outputs at most 16 A* is shown if with socket:typee:current=16
+
+This tagrendering is only visible in the popup if the following condition is met: socket:typee~.+ & socket:typee!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:typee
+
+The question is `What power output does a single plug of type European wall plug with ground pin (CEE7/4 type E) offer?`
+*European wall plug with ground pin (CEE7/4 type E) outputs at most {canonical(socket:typee:output)}* is shown if `socket:typee:output` is set
+
+ - *European wall plug with ground pin (CEE7/4 type E) outputs at most 3 kW* is shown if with socket:typee:output=3 kW
+ - *European wall plug with ground pin (CEE7/4 type E) outputs at most 22 kW* is shown if with socket:typee:output=22 kW
+
+This tagrendering is only visible in the popup if the following condition is met: socket:typee~.+ & socket:typee!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:chademo
+
+The question is `What voltage do the plugs with Chademo offer?`
+*Chademo outputs {canonical(socket:chademo:voltage)}* is shown if `socket:chademo:voltage` is set
+
+ - *Chademo outputs 500 volt* is shown if with socket:chademo:voltage=500
+
+This tagrendering is only visible in the popup if the following condition is met: socket:chademo~.+ & socket:chademo!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:chademo
+
+The question is `What current do the plugs with Chademo offer?`
+*Chademo outputs at most {canonical(socket:chademo:current)}* is shown if `socket:chademo:current` is set
+
+ - *Chademo outputs at most 120 A* is shown if with socket:chademo:current=120
+
+This tagrendering is only visible in the popup if the following condition is met: socket:chademo~.+ & socket:chademo!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:chademo
+
+The question is `What power output does a single plug of type Chademo offer?`
+*Chademo outputs at most {canonical(socket:chademo:output)}* is shown if `socket:chademo:output` is set
+
+ - *Chademo outputs at most 50 kW* is shown if with socket:chademo:output=50 kW
+
+This tagrendering is only visible in the popup if the following condition is met: socket:chademo~.+ & socket:chademo!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:type1_cable
+
+The question is `What voltage do the plugs with Type 1 with cable (J1772) offer?`
+*Type 1 with cable (J1772) outputs {canonical(socket:type1_cable:voltage)}* is shown if `socket:type1_cable:voltage` is set
+
+ - *Type 1 with cable (J1772) outputs 200 volt* is shown if with socket:type1_cable:voltage=200
+ - *Type 1 with cable (J1772) outputs 240 volt* is shown if with socket:type1_cable:voltage=240
+
+This tagrendering is only visible in the popup if the following condition is met: socket:type1_cable~.+ & socket:type1_cable!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:type1_cable
+
+The question is `What current do the plugs with Type 1 with cable (J1772) offer?`
+*Type 1 with cable (J1772) outputs at most {canonical(socket:type1_cable:current)}* is shown if `socket:type1_cable:current` is set
+
+ - *Type 1 with cable (J1772) outputs at most 32 A* is shown if with socket:type1_cable:current=32
+
+This tagrendering is only visible in the popup if the following condition is met: socket:type1_cable~.+ & socket:type1_cable!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:type1_cable
+
+The question is `What power output does a single plug of type Type 1 with cable (J1772) offer?`
+*Type 1 with cable (J1772) outputs at most {canonical(socket:type1_cable:output)}* is shown if `socket:type1_cable:output` is set
+
+ - *Type 1 with cable (J1772) outputs at most 3.7 kW* is shown if with socket:type1_cable:output=3.7 kW
+ - *Type 1 with cable (J1772) outputs at most 7 kW* is shown if with socket:type1_cable:output=7 kW
+
+This tagrendering is only visible in the popup if the following condition is met: socket:type1_cable~.+ & socket:type1_cable!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:type1
+
+The question is `What voltage do the plugs with Type 1 without cable (J1772) offer?`
+*Type 1 without cable (J1772) outputs {canonical(socket:type1:voltage)}* is shown if `socket:type1:voltage` is set
+
+ - *Type 1 without cable (J1772) outputs 200 volt* is shown if with socket:type1:voltage=200
+ - *Type 1 without cable (J1772) outputs 240 volt* is shown if with socket:type1:voltage=240
+
+This tagrendering is only visible in the popup if the following condition is met: socket:type1~.+ & socket:type1!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:type1
+
+The question is `What current do the plugs with Type 1 without cable (J1772) offer?`
+*Type 1 without cable (J1772) outputs at most {canonical(socket:type1:current)}* is shown if `socket:type1:current` is set
+
+ - *Type 1 without cable (J1772) outputs at most 32 A* is shown if with socket:type1:current=32
+
+This tagrendering is only visible in the popup if the following condition is met: socket:type1~.+ & socket:type1!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:type1
+
+The question is `What power output does a single plug of type Type 1 without cable (J1772) offer?`
+*Type 1 without cable (J1772) outputs at most {canonical(socket:type1:output)}* is shown if `socket:type1:output` is set
+
+ - *Type 1 without cable (J1772) outputs at most 3.7 kW* is shown if with socket:type1:output=3.7 kW
+ - *Type 1 without cable (J1772) outputs at most 6.6 kW* is shown if with socket:type1:output=6.6 kW
+ - *Type 1 without cable (J1772) outputs at most 7 kW* is shown if with socket:type1:output=7 kW
+ - *Type 1 without cable (J1772) outputs at most 7.2 kW* is shown if with socket:type1:output=7.2 kW
+
+This tagrendering is only visible in the popup if the following condition is met: socket:type1~.+ & socket:type1!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:type1_combo
+
+The question is `What voltage do the plugs with Type 1 CCS (aka Type 1 Combo) offer?`
+*Type 1 CCS (aka Type 1 Combo) outputs {canonical(socket:type1_combo:voltage)}* is shown if `socket:type1_combo:voltage` is set
+
+ - *Type 1 CCS (aka Type 1 Combo) outputs 400 volt* is shown if with socket:type1_combo:voltage=400
+ - *Type 1 CCS (aka Type 1 Combo) outputs 1000 volt* is shown if with socket:type1_combo:voltage=1000
+
+This tagrendering is only visible in the popup if the following condition is met: socket:type1_combo~.+ & socket:type1_combo!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:type1_combo
+
+The question is `What current do the plugs with Type 1 CCS (aka Type 1 Combo) offer?`
+*Type 1 CCS (aka Type 1 Combo) outputs at most {canonical(socket:type1_combo:current)}* is shown if `socket:type1_combo:current` is set
+
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 50 A* is shown if with socket:type1_combo:current=50
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 125 A* is shown if with socket:type1_combo:current=125
+
+This tagrendering is only visible in the popup if the following condition is met: socket:type1_combo~.+ & socket:type1_combo!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:type1_combo
+
+The question is `What power output does a single plug of type Type 1 CCS (aka Type 1 Combo) offer?`
+*Type 1 CCS (aka Type 1 Combo) outputs at most {canonical(socket:type1_combo:output)}* is shown if `socket:type1_combo:output` is set
+
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 50 kW* is shown if with socket:type1_combo:output=50 kW
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 62.5 kW* is shown if with socket:type1_combo:output=62.5 kW
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 150 kW* is shown if with socket:type1_combo:output=150 kW
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 350 kW* is shown if with socket:type1_combo:output=350 kW
+
+This tagrendering is only visible in the popup if the following condition is met: socket:type1_combo~.+ & socket:type1_combo!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:tesla_supercharger
+
+The question is `What voltage do the plugs with Tesla Supercharger offer?`
+*Tesla Supercharger outputs {canonical(socket:tesla_supercharger:voltage)}* is shown if `socket:tesla_supercharger:voltage` is set
+
+ - *Tesla Supercharger outputs 480 volt* is shown if with socket:tesla_supercharger:voltage=480
+
+This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:tesla_supercharger
+
+The question is `What current do the plugs with Tesla Supercharger offer?`
+*Tesla Supercharger outputs at most {canonical(socket:tesla_supercharger:current)}* is shown if `socket:tesla_supercharger:current` is set
+
+ - *Tesla Supercharger outputs at most 125 A* is shown if with socket:tesla_supercharger:current=125
+ - *Tesla Supercharger outputs at most 350 A* is shown if with socket:tesla_supercharger:current=350
+
+This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:tesla_supercharger
+
+The question is `What power output does a single plug of type Tesla Supercharger offer?`
+*Tesla Supercharger outputs at most {canonical(socket:tesla_supercharger:output)}* is shown if `socket:tesla_supercharger:output` is set
+
+ - *Tesla Supercharger outputs at most 120 kW* is shown if with socket:tesla_supercharger:output=120 kW
+ - *Tesla Supercharger outputs at most 150 kW* is shown if with socket:tesla_supercharger:output=150 kW
+ - *Tesla Supercharger outputs at most 250 kW* is shown if with socket:tesla_supercharger:output=250 kW
+
+This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:type2
+
+The question is `What voltage do the plugs with Type 2 (mennekes) offer?`
+*Type 2 (mennekes) outputs {canonical(socket:type2:voltage)}* is shown if `socket:type2:voltage` is set
+
+ - *Type 2 (mennekes) outputs 230 volt* is shown if with socket:type2:voltage=230
+ - *Type 2 (mennekes) outputs 400 volt* is shown if with socket:type2:voltage=400
+
+This tagrendering is only visible in the popup if the following condition is met: socket:type2~.+ & socket:type2!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:type2
+
+The question is `What current do the plugs with Type 2 (mennekes) offer?`
+*Type 2 (mennekes) outputs at most {canonical(socket:type2:current)}* is shown if `socket:type2:current` is set
+
+ - *Type 2 (mennekes) outputs at most 16 A* is shown if with socket:type2:current=16
+ - *Type 2 (mennekes) outputs at most 32 A* is shown if with socket:type2:current=32
+
+This tagrendering is only visible in the popup if the following condition is met: socket:type2~.+ & socket:type2!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:type2
+
+The question is `What power output does a single plug of type Type 2 (mennekes) offer?`
+*Type 2 (mennekes) outputs at most {canonical(socket:type2:output)}* is shown if `socket:type2:output` is set
+
+ - *Type 2 (mennekes) outputs at most 11 kW* is shown if with socket:type2:output=11 kW
+ - *Type 2 (mennekes) outputs at most 22 kW* is shown if with socket:type2:output=22 kW
+
+This tagrendering is only visible in the popup if the following condition is met: socket:type2~.+ & socket:type2!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:type2_combo
+
+The question is `What voltage do the plugs with Type 2 CCS (mennekes) offer?`
+*Type 2 CCS (mennekes) outputs {canonical(socket:type2_combo:voltage)}* is shown if `socket:type2_combo:voltage` is set
+
+ - *Type 2 CCS (mennekes) outputs 500 volt* is shown if with socket:type2_combo:voltage=500
+ - *Type 2 CCS (mennekes) outputs 920 volt* is shown if with socket:type2_combo:voltage=920
+
+This tagrendering is only visible in the popup if the following condition is met: socket:type2_combo~.+ & socket:type2_combo!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:type2_combo
+
+The question is `What current do the plugs with Type 2 CCS (mennekes) offer?`
+*Type 2 CCS (mennekes) outputs at most {canonical(socket:type2_combo:current)}* is shown if `socket:type2_combo:current` is set
+
+ - *Type 2 CCS (mennekes) outputs at most 125 A* is shown if with socket:type2_combo:current=125
+ - *Type 2 CCS (mennekes) outputs at most 350 A* is shown if with socket:type2_combo:current=350
+
+This tagrendering is only visible in the popup if the following condition is met: socket:type2_combo~.+ & socket:type2_combo!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:type2_combo
+
+The question is `What power output does a single plug of type Type 2 CCS (mennekes) offer?`
+*Type 2 CCS (mennekes) outputs at most {canonical(socket:type2_combo:output)}* is shown if `socket:type2_combo:output` is set
+
+ - *Type 2 CCS (mennekes) outputs at most 50 kW* is shown if with socket:type2_combo:output=50 kW
+
+This tagrendering is only visible in the popup if the following condition is met: socket:type2_combo~.+ & socket:type2_combo!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:type2_cable
+
+The question is `What voltage do the plugs with Type 2 with cable (mennekes) offer?`
+*Type 2 with cable (mennekes) outputs {canonical(socket:type2_cable:voltage)}* is shown if `socket:type2_cable:voltage` is set
+
+ - *Type 2 with cable (mennekes) outputs 230 volt* is shown if with socket:type2_cable:voltage=230
+ - *Type 2 with cable (mennekes) outputs 400 volt* is shown if with socket:type2_cable:voltage=400
+
+This tagrendering is only visible in the popup if the following condition is met: socket:type2_cable~.+ & socket:type2_cable!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:type2_cable
+
+The question is `What current do the plugs with Type 2 with cable (mennekes) offer?`
+*Type 2 with cable (mennekes) outputs at most {canonical(socket:type2_cable:current)}* is shown if `socket:type2_cable:current` is set
+
+ - *Type 2 with cable (mennekes) outputs at most 16 A* is shown if with socket:type2_cable:current=16
+ - *Type 2 with cable (mennekes) outputs at most 32 A* is shown if with socket:type2_cable:current=32
+
+This tagrendering is only visible in the popup if the following condition is met: socket:type2_cable~.+ & socket:type2_cable!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:type2_cable
+
+The question is `What power output does a single plug of type Type 2 with cable (mennekes) offer?`
+*Type 2 with cable (mennekes) outputs at most {canonical(socket:type2_cable:output)}* is shown if `socket:type2_cable:output` is set
+
+ - *Type 2 with cable (mennekes) outputs at most 11 kW* is shown if with socket:type2_cable:output=11 kW
+ - *Type 2 with cable (mennekes) outputs at most 22 kW* is shown if with socket:type2_cable:output=22 kW
+
+This tagrendering is only visible in the popup if the following condition is met: socket:type2_cable~.+ & socket:type2_cable!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:tesla_supercharger_ccs
+
+The question is `What voltage do the plugs with Tesla Supercharger CCS (a branded type2_css) offer?`
+*Tesla Supercharger CCS (a branded type2_css) outputs {canonical(socket:tesla_supercharger_ccs:voltage)}* is shown if `socket:tesla_supercharger_ccs:voltage` is set
+
+ - *Tesla Supercharger CCS (a branded type2_css) outputs 500 volt* is shown if with socket:tesla_supercharger_ccs:voltage=500
+ - *Tesla Supercharger CCS (a branded type2_css) outputs 920 volt* is shown if with socket:tesla_supercharger_ccs:voltage=920
+
+This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:tesla_supercharger_ccs
+
+The question is `What current do the plugs with Tesla Supercharger CCS (a branded type2_css) offer?`
+*Tesla Supercharger CCS (a branded type2_css) outputs at most {canonical(socket:tesla_supercharger_ccs:current)}* is shown if `socket:tesla_supercharger_ccs:current` is set
+
+ - *Tesla Supercharger CCS (a branded type2_css) outputs at most 125 A* is shown if with socket:tesla_supercharger_ccs:current=125
+ - *Tesla Supercharger CCS (a branded type2_css) outputs at most 350 A* is shown if with socket:tesla_supercharger_ccs:current=350
+
+This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:tesla_supercharger_ccs
+
+The question is `What power output does a single plug of type Tesla Supercharger CCS (a branded type2_css) offer?`
+*Tesla Supercharger CCS (a branded type2_css) outputs at most {canonical(socket:tesla_supercharger_ccs:output)}* is shown if `socket:tesla_supercharger_ccs:output` is set
+
+ - *Tesla Supercharger CCS (a branded type2_css) outputs at most 50 kW* is shown if with socket:tesla_supercharger_ccs:output=50 kW
+
+This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:tesla_destination_us
+
+The question is `What voltage do the plugs with Tesla Supercharger (destination) offer?`
+*Tesla Supercharger (destination) outputs {canonical(socket:tesla_destination:voltage)}* is shown if `socket:tesla_destination:voltage` is set
+
+ - *Tesla Supercharger (destination) outputs 480 volt* is shown if with socket:tesla_destination:voltage=480
+
+This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:tesla_destination_us
+
+The question is `What current do the plugs with Tesla Supercharger (destination) offer?`
+*Tesla Supercharger (destination) outputs at most {canonical(socket:tesla_destination:current)}* is shown if `socket:tesla_destination:current` is set
+
+ - *Tesla Supercharger (destination) outputs at most 125 A* is shown if with socket:tesla_destination:current=125
+ - *Tesla Supercharger (destination) outputs at most 350 A* is shown if with socket:tesla_destination:current=350
+
+This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:tesla_destination_us
+
+The question is `What power output does a single plug of type Tesla Supercharger (destination) offer?`
+*Tesla Supercharger (destination) outputs at most {canonical(socket:tesla_destination:output)}* is shown if `socket:tesla_destination:output` is set
+
+ - *Tesla Supercharger (destination) outputs at most 120 kW* is shown if with socket:tesla_destination:output=120 kW
+ - *Tesla Supercharger (destination) outputs at most 150 kW* is shown if with socket:tesla_destination:output=150 kW
+ - *Tesla Supercharger (destination) outputs at most 250 kW* is shown if with socket:tesla_destination:output=250 kW
+
+This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:tesla_destination
+
+The question is `What voltage do the plugs with Tesla supercharger (destination) (A Type 2 with cable branded as tesla) offer?`
+*Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs {canonical(socket:tesla_destination:voltage)}* is shown if `socket:tesla_destination:voltage` is set
+
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 230 volt* is shown if with socket:tesla_destination:voltage=230
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 400 volt* is shown if with socket:tesla_destination:voltage=400
+
+This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:tesla_destination
+
+The question is `What current do the plugs with Tesla supercharger (destination) (A Type 2 with cable branded as tesla) offer?`
+*Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most {canonical(socket:tesla_destination:current)}* is shown if `socket:tesla_destination:current` is set
+
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 16 A* is shown if with socket:tesla_destination:current=16
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 32 A* is shown if with socket:tesla_destination:current=32
+
+This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:tesla_destination
+
+The question is `What power output does a single plug of type Tesla supercharger (destination) (A Type 2 with cable branded as tesla) offer?`
+*Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most {canonical(socket:tesla_destination:output)}* is shown if `socket:tesla_destination:output` is set
+
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 11 kW* is shown if with socket:tesla_destination:output=11 kW
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 22 kW* is shown if with socket:tesla_destination:output=22 kW
+
+This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:USB-A
+
+The question is `What voltage do the plugs with USB to charge phones and small electronics offer?`
+*USB to charge phones and small electronics outputs {canonical(socket:USB-A:voltage)}* is shown if `socket:USB-A:voltage` is set
+
+ - *USB to charge phones and small electronics outputs 5 volt* is shown if with socket:USB-A:voltage=5
+
+This tagrendering is only visible in the popup if the following condition is met: socket:USB-A~.+ & socket:USB-A!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:USB-A
+
+The question is `What current do the plugs with USB to charge phones and small electronics offer?`
+*USB to charge phones and small electronics outputs at most {canonical(socket:USB-A:current)}* is shown if `socket:USB-A:current` is set
+
+ - *USB to charge phones and small electronics outputs at most 1 A* is shown if with socket:USB-A:current=1
+ - *USB to charge phones and small electronics outputs at most 2 A* is shown if with socket:USB-A:current=2
+
+This tagrendering is only visible in the popup if the following condition is met: socket:USB-A~.+ & socket:USB-A!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:USB-A
+
+The question is `What power output does a single plug of type USB to charge phones and small electronics offer?`
+*USB to charge phones and small electronics outputs at most {canonical(socket:USB-A:output)}* is shown if `socket:USB-A:output` is set
+
+ - *USB to charge phones and small electronics outputs at most 5W* is shown if with socket:USB-A:output=5W
+ - *USB to charge phones and small electronics outputs at most 10W* is shown if with socket:USB-A:output=10W
+
+This tagrendering is only visible in the popup if the following condition is met: socket:USB-A~.+ & socket:USB-A!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:bosch_3pin
+
+The question is `What voltage do the plugs with Bosch Active Connect with 3 pins and cable offer?`
+*Bosch Active Connect with 3 pins and cable outputs {canonical(socket:bosch_3pin:voltage)}* is shown if `socket:bosch_3pin:voltage` is set
+
+This tagrendering is only visible in the popup if the following condition is met: socket:bosch_3pin~.+ & socket:bosch_3pin!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:bosch_3pin
+
+The question is `What current do the plugs with Bosch Active Connect with 3 pins and cable offer?`
+*Bosch Active Connect with 3 pins and cable outputs at most {canonical(socket:bosch_3pin:current)}* is shown if `socket:bosch_3pin:current` is set
+
+This tagrendering is only visible in the popup if the following condition is met: socket:bosch_3pin~.+ & socket:bosch_3pin!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:bosch_3pin
+
+The question is `What power output does a single plug of type Bosch Active Connect with 3 pins and cable offer?`
+*Bosch Active Connect with 3 pins and cable outputs at most {canonical(socket:bosch_3pin:output)}* is shown if `socket:bosch_3pin:output` is set
+
+This tagrendering is only visible in the popup if the following condition is met: socket:bosch_3pin~.+ & socket:bosch_3pin!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:bosch_5pin
+
+The question is `What voltage do the plugs with Bosch Active Connect with 5 pins and cable offer?`
+*Bosch Active Connect with 5 pins and cable outputs {canonical(socket:bosch_5pin:voltage)}* is shown if `socket:bosch_5pin:voltage` is set
+
+This tagrendering is only visible in the popup if the following condition is met: socket:bosch_5pin~.+ & socket:bosch_5pin!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:bosch_5pin
+
+The question is `What current do the plugs with Bosch Active Connect with 5 pins and cable offer?`
+*Bosch Active Connect with 5 pins and cable outputs at most {canonical(socket:bosch_5pin:current)}* is shown if `socket:bosch_5pin:current` is set
+
+This tagrendering is only visible in the popup if the following condition is met: socket:bosch_5pin~.+ & socket:bosch_5pin!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:bosch_5pin
+
+The question is `What power output does a single plug of type Bosch Active Connect with 5 pins and cable offer?`
+*Bosch Active Connect with 5 pins and cable outputs at most {canonical(socket:bosch_5pin:output)}* is shown if `socket:bosch_5pin:output` is set
+
+This tagrendering is only visible in the popup if the following condition is met: socket:bosch_5pin~.+ & socket:bosch_5pin!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:bs1363
+
+The question is `What voltage do the plugs with BS1363 (Type G) offer?`
+*BS1363 (Type G) outputs {canonical(socket:bs1363:voltage)}* is shown if `socket:bs1363:voltage` is set
+
+ - *BS1363 (Type G) outputs 230 volt* is shown if with socket:bs1363:voltage=230
+
+This tagrendering is only visible in the popup if the following condition is met: socket:bs1363~.+ & socket:bs1363!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:bs1363
+
+The question is `What current do the plugs with BS1363 (Type G) offer?`
+*BS1363 (Type G) outputs at most {canonical(socket:bs1363:current)}* is shown if `socket:bs1363:current` is set
+
+ - *BS1363 (Type G) outputs at most 13 A* is shown if with socket:bs1363:current=13
+
+This tagrendering is only visible in the popup if the following condition is met: socket:bs1363~.+ & socket:bs1363!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:bs1363
+
+The question is `What power output does a single plug of type BS1363 (Type G) offer?`
+*BS1363 (Type G) outputs at most {canonical(socket:bs1363:output)}* is shown if `socket:bs1363:output` is set
+
+ - *BS1363 (Type G) outputs at most 3kW* is shown if with socket:bs1363:output=3kW
+
+This tagrendering is only visible in the popup if the following condition is met: socket:bs1363~.+ & socket:bs1363!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:nema5_15
+
+The question is `What voltage do the plugs with NEMA 5-15 (Type B) offer?`
+*NEMA 5-15 (Type B) outputs {canonical(socket:nema5_15:voltage)}* is shown if `socket:nema5_15:voltage` is set
+
+ - *NEMA 5-15 (Type B) outputs 120 volt* is shown if with socket:nema5_15:voltage=120
+
+This tagrendering is only visible in the popup if the following condition is met: socket:nema5_15~.+ & socket:nema5_15!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:nema5_15
+
+The question is `What current do the plugs with NEMA 5-15 (Type B) offer?`
+*NEMA 5-15 (Type B) outputs at most {canonical(socket:nema5_15:current)}* is shown if `socket:nema5_15:current` is set
+
+ - *NEMA 5-15 (Type B) outputs at most 15 A* is shown if with socket:nema5_15:current=15
+
+This tagrendering is only visible in the popup if the following condition is met: socket:nema5_15~.+ & socket:nema5_15!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:nema5_15
+
+The question is `What power output does a single plug of type NEMA 5-15 (Type B) offer?`
+*NEMA 5-15 (Type B) outputs at most {canonical(socket:nema5_15:output)}* is shown if `socket:nema5_15:output` is set
+
+ - *NEMA 5-15 (Type B) outputs at most 1.8 kW* is shown if with socket:nema5_15:output=1.8 kW
+
+This tagrendering is only visible in the popup if the following condition is met: socket:nema5_15~.+ & socket:nema5_15!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:sev1011_t23
+
+The question is `What voltage do the plugs with SEV 1011 T23 (Type J) offer?`
+*SEV 1011 T23 (Type J) outputs {canonical(socket:sev1011_t23:voltage)}* is shown if `socket:sev1011_t23:voltage` is set
+
+ - *SEV 1011 T23 (Type J) outputs 230 volt* is shown if with socket:sev1011_t23:voltage=230
+
+This tagrendering is only visible in the popup if the following condition is met: socket:sev1011_t23~.+ & socket:sev1011_t23!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:sev1011_t23
+
+The question is `What current do the plugs with SEV 1011 T23 (Type J) offer?`
+*SEV 1011 T23 (Type J) outputs at most {canonical(socket:sev1011_t23:current)}* is shown if `socket:sev1011_t23:current` is set
+
+ - *SEV 1011 T23 (Type J) outputs at most 16 A* is shown if with socket:sev1011_t23:current=16
+
+This tagrendering is only visible in the popup if the following condition is met: socket:sev1011_t23~.+ & socket:sev1011_t23!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:sev1011_t23
+
+The question is `What power output does a single plug of type SEV 1011 T23 (Type J) offer?`
+*SEV 1011 T23 (Type J) outputs at most {canonical(socket:sev1011_t23:output)}* is shown if `socket:sev1011_t23:output` is set
+
+ - *SEV 1011 T23 (Type J) outputs at most 3.7 kW* is shown if with socket:sev1011_t23:output=3.7 kW
+
+This tagrendering is only visible in the popup if the following condition is met: socket:sev1011_t23~.+ & socket:sev1011_t23!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:as3112
+
+The question is `What voltage do the plugs with AS3112 (Type I) offer?`
+*AS3112 (Type I) outputs {canonical(socket:as3112:voltage)}* is shown if `socket:as3112:voltage` is set
+
+ - *AS3112 (Type I) outputs 230 volt* is shown if with socket:as3112:voltage=230
+
+This tagrendering is only visible in the popup if the following condition is met: socket:as3112~.+ & socket:as3112!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:as3112
+
+The question is `What current do the plugs with AS3112 (Type I) offer?`
+*AS3112 (Type I) outputs at most {canonical(socket:as3112:current)}* is shown if `socket:as3112:current` is set
+
+ - *AS3112 (Type I) outputs at most 10 A* is shown if with socket:as3112:current=10
+
+This tagrendering is only visible in the popup if the following condition is met: socket:as3112~.+ & socket:as3112!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:as3112
+
+The question is `What power output does a single plug of type AS3112 (Type I) offer?`
+*AS3112 (Type I) outputs at most {canonical(socket:as3112:output)}* is shown if `socket:as3112:output` is set
+
+ - *AS3112 (Type I) outputs at most 2.3 kW* is shown if with socket:as3112:output=2.3 kW
+
+This tagrendering is only visible in the popup if the following condition is met: socket:as3112~.+ & socket:as3112!=0
+This tagrendering has labels
+`technical`
+
+### voltage-socket:nema_5_20
+
+The question is `What voltage do the plugs with NEMA 5-20 (Type B) offer?`
+*NEMA 5-20 (Type B) outputs {canonical(socket:nema_5_20:voltage)}* is shown if `socket:nema_5_20:voltage` is set
+
+ - *NEMA 5-20 (Type B) outputs 120 volt* is shown if with socket:nema_5_20:voltage=120
+
+This tagrendering is only visible in the popup if the following condition is met: socket:nema_5_20~.+ & socket:nema_5_20!=0
+This tagrendering has labels
+`technical`
+
+### current-socket:nema_5_20
+
+The question is `What current do the plugs with NEMA 5-20 (Type B) offer?`
+*NEMA 5-20 (Type B) outputs at most {canonical(socket:nema_5_20:current)}* is shown if `socket:nema_5_20:current` is set
+
+ - *NEMA 5-20 (Type B) outputs at most 20 A* is shown if with socket:nema_5_20:current=20
+
+This tagrendering is only visible in the popup if the following condition is met: socket:nema_5_20~.+ & socket:nema_5_20!=0
+This tagrendering has labels
+`technical`
+
+### power-output-socket:nema_5_20
+
+The question is `What power output does a single plug of type NEMA 5-20 (Type B) offer?`
+*NEMA 5-20 (Type B) outputs at most {canonical(socket:nema_5_20:output)}* is shown if `socket:nema_5_20:output` is set
+
+ - *NEMA 5-20 (Type B) outputs at most 2.4 kW* is shown if with socket:nema_5_20:output=2.4 kW
+
+This tagrendering is only visible in the popup if the following condition is met: socket:nema_5_20~.+ & socket:nema_5_20!=0
+This tagrendering has labels
+`technical`
+
+### move-button
+
+_This tagrendering has no question and is thus read-only_
+*{move_button()}*
+
+### lod
+
+_This tagrendering has no question and is thus read-only_
+*{linked_data_from_website()}*
+
+This tagrendering has labels
+`added_by_default`
+
+
+This document is autogenerated from [assets/layers/charge_point/charge_point.json](https://github.com/pietervdvn/MapComplete/blob/develop/assets/layers/charge_point/charge_point.json)
diff --git a/Docs/Layers/charging_station.md b/Docs/Layers/charging_station.md
index 5c4c4a4d6..9d277b186 100644
--- a/Docs/Layers/charging_station.md
+++ b/Docs/Layers/charging_station.md
@@ -162,60 +162,60 @@ Elements must match **any** of the following expressions:
| [access](https://wiki.openstreetmap.org/wiki/Key:access) | [string](../SpecialInputElements.md#string) | [yes](https://wiki.openstreetmap.org/wiki/Tag:access%3Dyes) [customers](https://wiki.openstreetmap.org/wiki/Tag:access%3Dcustomers) [key](https://wiki.openstreetmap.org/wiki/Tag:access%3Dkey) [private](https://wiki.openstreetmap.org/wiki/Tag:access%3Dprivate) [permissive](https://wiki.openstreetmap.org/wiki/Tag:access%3Dpermissive) |
| [capacity](https://wiki.openstreetmap.org/wiki/Key:capacity) | [pnat](../SpecialInputElements.md#pnat) | |
| [socket:schuko](https://wiki.openstreetmap.org/wiki/Key:socket:schuko) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:schuko:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:voltage%3D230 V) |
-| [socket:schuko:current](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:current%3D16 A) |
+| [socket:schuko:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:voltage%3D230) |
+| [socket:schuko:current](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:current%3D16) |
| [socket:schuko:output](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3.6 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:output%3D3.6 kW) |
| [socket:typee](https://wiki.openstreetmap.org/wiki/Key:socket:typee) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:typee:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:typee:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:voltage%3D230 V) |
-| [socket:typee:current](https://wiki.openstreetmap.org/wiki/Key:socket:typee:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:current%3D16 A) |
+| [socket:typee:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:typee:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:voltage%3D230) |
+| [socket:typee:current](https://wiki.openstreetmap.org/wiki/Key:socket:typee:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:current%3D16) |
| [socket:typee:output](https://wiki.openstreetmap.org/wiki/Key:socket:typee:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:output%3D3 kW) [22 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:output%3D22 kW) |
| [socket:chademo](https://wiki.openstreetmap.org/wiki/Key:socket:chademo) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:chademo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500 V](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:voltage%3D500 V) |
-| [socket:chademo:current](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [120 A](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:current%3D120 A) |
+| [socket:chademo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:voltage%3D500) |
+| [socket:chademo:current](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [120](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:current%3D120) |
| [socket:chademo:output](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:output) | [pfloat](../SpecialInputElements.md#pfloat) | [50 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:output%3D50 kW) |
| [socket:type1_cable](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type1_cable:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [200 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:voltage%3D200 V) [240 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:voltage%3D240 V) |
-| [socket:type1_cable:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:current) | [pfloat](../SpecialInputElements.md#pfloat) | [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:current%3D32 A) |
+| [socket:type1_cable:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [200](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:voltage%3D200) [240](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:voltage%3D240) |
+| [socket:type1_cable:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:current) | [pfloat](../SpecialInputElements.md#pfloat) | [32](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:current%3D32) |
| [socket:type1_cable:output](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3.7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:output%3D3.7 kW) [7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:output%3D7 kW) |
| [socket:type1](https://wiki.openstreetmap.org/wiki/Key:socket:type1) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type1:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [200 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:voltage%3D200 V) [240 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:voltage%3D240 V) |
-| [socket:type1:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1:current) | [pfloat](../SpecialInputElements.md#pfloat) | [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:current%3D32 A) |
+| [socket:type1:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [200](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:voltage%3D200) [240](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:voltage%3D240) |
+| [socket:type1:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1:current) | [pfloat](../SpecialInputElements.md#pfloat) | [32](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:current%3D32) |
| [socket:type1:output](https://wiki.openstreetmap.org/wiki/Key:socket:type1:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3.7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:output%3D3.7 kW) [6.6 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:output%3D6.6 kW) [7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:output%3D7 kW) [7.2 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:output%3D7.2 kW) |
| [socket:type1_combo](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type1_combo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [400 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:voltage%3D400 V) [1000 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:voltage%3D1000 V) |
-| [socket:type1_combo:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [50 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:current%3D50 A) [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:current%3D125 A) |
+| [socket:type1_combo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [400](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:voltage%3D400) [1000](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:voltage%3D1000) |
+| [socket:type1_combo:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [50](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:current%3D50) [125](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:current%3D125) |
| [socket:type1_combo:output](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:output) | [pfloat](../SpecialInputElements.md#pfloat) | [50 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:output%3D50 kW) [62.5 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:output%3D62.5 kW) [150 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:output%3D150 kW) [350 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:output%3D350 kW) |
| [socket:tesla_supercharger](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:tesla_supercharger:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [480 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:voltage%3D480 V) |
-| [socket:tesla_supercharger:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:current%3D125 A) [350 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:current%3D350 A) |
+| [socket:tesla_supercharger:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [480](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:voltage%3D480) |
+| [socket:tesla_supercharger:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:current%3D125) [350](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:current%3D350) |
| [socket:tesla_supercharger:output](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:output) | [pfloat](../SpecialInputElements.md#pfloat) | [120 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:output%3D120 kW) [150 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:output%3D150 kW) [250 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:output%3D250 kW) |
| [socket:type2](https://wiki.openstreetmap.org/wiki/Key:socket:type2) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type2:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:voltage%3D230 V) [400 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:voltage%3D400 V) |
-| [socket:type2:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:current%3D16 A) [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:current%3D32 A) |
+| [socket:type2:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:voltage%3D230) [400](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:voltage%3D400) |
+| [socket:type2:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:current%3D16) [32](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:current%3D32) |
| [socket:type2:output](https://wiki.openstreetmap.org/wiki/Key:socket:type2:output) | [pfloat](../SpecialInputElements.md#pfloat) | [11 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:output%3D11 kW) [22 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:output%3D22 kW) |
| [socket:type2_combo](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type2_combo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:voltage%3D500 V) [920 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:voltage%3D920 V) |
-| [socket:type2_combo:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:current%3D125 A) [350 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:current%3D350 A) |
+| [socket:type2_combo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:voltage%3D500) [920](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:voltage%3D920) |
+| [socket:type2_combo:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:current%3D125) [350](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:current%3D350) |
| [socket:type2_combo:output](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:output) | [pfloat](../SpecialInputElements.md#pfloat) | [50 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:output%3D50 kW) |
| [socket:type2_cable](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type2_cable:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:voltage%3D230 V) [400 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:voltage%3D400 V) |
-| [socket:type2_cable:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:current%3D16 A) [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:current%3D32 A) |
+| [socket:type2_cable:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:voltage%3D230) [400](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:voltage%3D400) |
+| [socket:type2_cable:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:current%3D16) [32](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:current%3D32) |
| [socket:type2_cable:output](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:output) | [pfloat](../SpecialInputElements.md#pfloat) | [11 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:output%3D11 kW) [22 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:output%3D22 kW) |
| [socket:tesla_supercharger_ccs](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:tesla_supercharger_ccs:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:voltage%3D500 V) [920 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:voltage%3D920 V) |
-| [socket:tesla_supercharger_ccs:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:current%3D125 A) [350 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:current%3D350 A) |
+| [socket:tesla_supercharger_ccs:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:voltage%3D500) [920](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:voltage%3D920) |
+| [socket:tesla_supercharger_ccs:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:current%3D125) [350](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:current%3D350) |
| [socket:tesla_supercharger_ccs:output](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:output) | [pfloat](../SpecialInputElements.md#pfloat) | [50 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:output%3D50 kW) |
| [socket:tesla_destination](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:tesla_destination:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [480 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D480 V) |
-| [socket:tesla_destination:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D125 A) [350 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D350 A) |
+| [socket:tesla_destination:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [480](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D480) |
+| [socket:tesla_destination:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D125) [350](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D350) |
| [socket:tesla_destination:output](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:output) | [pfloat](../SpecialInputElements.md#pfloat) | [120 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D120 kW) [150 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D150 kW) [250 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D250 kW) |
| [socket:tesla_destination](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:tesla_destination:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D230 V) [400 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D400 V) |
-| [socket:tesla_destination:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D16 A) [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D32 A) |
+| [socket:tesla_destination:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D230) [400](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D400) |
+| [socket:tesla_destination:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D16) [32](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D32) |
| [socket:tesla_destination:output](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:output) | [pfloat](../SpecialInputElements.md#pfloat) | [11 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D11 kW) [22 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D22 kW) |
| [socket:USB-A](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:USB-A:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [5 V](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:voltage%3D5 V) |
-| [socket:USB-A:current](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:current) | [pfloat](../SpecialInputElements.md#pfloat) | [1 A](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:current%3D1 A) [2 A](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:current%3D2 A) |
+| [socket:USB-A:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [5](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:voltage%3D5) |
+| [socket:USB-A:current](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:current) | [pfloat](../SpecialInputElements.md#pfloat) | [1](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:current%3D1) [2](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:current%3D2) |
| [socket:USB-A:output](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:output) | [pfloat](../SpecialInputElements.md#pfloat) | [5W](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:output%3D5W) [10W](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:output%3D10W) |
| [socket:bosch_3pin](https://wiki.openstreetmap.org/wiki/Key:socket:bosch_3pin) | [pnat](../SpecialInputElements.md#pnat) | |
| [socket:bosch_3pin:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:bosch_3pin:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | |
@@ -226,24 +226,24 @@ Elements must match **any** of the following expressions:
| [socket:bosch_5pin:current](https://wiki.openstreetmap.org/wiki/Key:socket:bosch_5pin:current) | [pfloat](../SpecialInputElements.md#pfloat) | |
| [socket:bosch_5pin:output](https://wiki.openstreetmap.org/wiki/Key:socket:bosch_5pin:output) | [pfloat](../SpecialInputElements.md#pfloat) | |
| [socket:bs1363](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:bs1363:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:voltage%3D230 V) |
-| [socket:bs1363:current](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:current) | [pfloat](../SpecialInputElements.md#pfloat) | [13 A](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:current%3D13 A) |
+| [socket:bs1363:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:voltage%3D230) |
+| [socket:bs1363:current](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:current) | [pfloat](../SpecialInputElements.md#pfloat) | [13](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:current%3D13) |
| [socket:bs1363:output](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3kW](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:output%3D3kW) |
| [socket:nema5_15](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:nema5_15:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [120 V](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:voltage%3D120 V) |
-| [socket:nema5_15:current](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:current) | [pfloat](../SpecialInputElements.md#pfloat) | [15 A](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:current%3D15 A) |
+| [socket:nema5_15:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [120](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:voltage%3D120) |
+| [socket:nema5_15:current](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:current) | [pfloat](../SpecialInputElements.md#pfloat) | [15](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:current%3D15) |
| [socket:nema5_15:output](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:output) | [pfloat](../SpecialInputElements.md#pfloat) | [1.8 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:output%3D1.8 kW) |
| [socket:sev1011_t23](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:sev1011_t23:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:voltage%3D230 V) |
-| [socket:sev1011_t23:current](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:current%3D16 A) |
+| [socket:sev1011_t23:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:voltage%3D230) |
+| [socket:sev1011_t23:current](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:current%3D16) |
| [socket:sev1011_t23:output](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3.7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:output%3D3.7 kW) |
| [socket:as3112](https://wiki.openstreetmap.org/wiki/Key:socket:as3112) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:as3112:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:voltage%3D230 V) |
-| [socket:as3112:current](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:current) | [pfloat](../SpecialInputElements.md#pfloat) | [10 A](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:current%3D10 A) |
+| [socket:as3112:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:voltage%3D230) |
+| [socket:as3112:current](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:current) | [pfloat](../SpecialInputElements.md#pfloat) | [10](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:current%3D10) |
| [socket:as3112:output](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:output) | [pfloat](../SpecialInputElements.md#pfloat) | [2.3 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:output%3D2.3 kW) |
| [socket:nema_5_20](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:nema_5_20:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [120 V](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:voltage%3D120 V) |
-| [socket:nema_5_20:current](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:current) | [pfloat](../SpecialInputElements.md#pfloat) | [20 A](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:current%3D20 A) |
+| [socket:nema_5_20:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [120](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:voltage%3D120) |
+| [socket:nema_5_20:current](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:current) | [pfloat](../SpecialInputElements.md#pfloat) | [20](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:current%3D20) |
| [socket:nema_5_20:output](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:output) | [pfloat](../SpecialInputElements.md#pfloat) | [2.4 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:output%3D2.4 kW) |
| [opening_hours](https://wiki.openstreetmap.org/wiki/Key:opening_hours) | [opening_hours](../SpecialInputElements.md#opening_hours) | [24/7](https://wiki.openstreetmap.org/wiki/Tag:opening_hours%3D24/7) |
| [fee](https://wiki.openstreetmap.org/wiki/Key:fee) | Multiple choice | [no](https://wiki.openstreetmap.org/wiki/Tag:fee%3Dno) [no](https://wiki.openstreetmap.org/wiki/Tag:fee%3Dno) [yes](https://wiki.openstreetmap.org/wiki/Tag:fee%3Dyes) [yes](https://wiki.openstreetmap.org/wiki/Tag:fee%3Dyes) |
@@ -345,13 +345,15 @@ The question is `How much plugs of type Schuko wall plug without ground p
*There are {socket:schuko} plugs of type Schuko wall plug without ground pin (CEE7/4 type F) available here* is shown if `socket:schuko` is set
This tagrendering is only visible in the popup if the following condition is met: socket:schuko~.+ & socket:schuko!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:schuko
The question is `What voltage do the plugs with Schuko wall plug without ground pin (CEE7/4 type F) offer?`
*Schuko wall plug without ground pin (CEE7/4 type F) outputs {canonical(socket:schuko:voltage)}* is shown if `socket:schuko:voltage` is set
- - *Schuko wall plug without ground pin (CEE7/4 type F) outputs 230 volt* is shown if with socket:schuko:voltage=230 V
+ - *Schuko wall plug without ground pin (CEE7/4 type F) outputs 230 volt* is shown if with socket:schuko:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:schuko~.+ & socket:schuko!=0
This tagrendering has labels
@@ -362,7 +364,7 @@ This tagrendering has labels
The question is `What current do the plugs with Schuko wall plug without ground pin (CEE7/4 type F) offer?`
*Schuko wall plug without ground pin (CEE7/4 type F) outputs at most {canonical(socket:schuko:current)}* is shown if `socket:schuko:current` is set
- - *Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 16 A* is shown if with socket:schuko:current=16 A
+ - *Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 16 A* is shown if with socket:schuko:current=16
This tagrendering is only visible in the popup if the following condition is met: socket:schuko~.+ & socket:schuko!=0
This tagrendering has labels
@@ -373,7 +375,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type Schuko wall plug without ground pin (CEE7/4 type F) offer?`
*Schuko wall plug without ground pin (CEE7/4 type F) outputs at most {canonical(socket:schuko:output)}* is shown if `socket:schuko:output` is set
- - *Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 3.6 kW A* is shown if with socket:schuko:output=3.6 kW
+ - *Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 3.6 kW* is shown if with socket:schuko:output=3.6 kW
This tagrendering is only visible in the popup if the following condition is met: socket:schuko~.+ & socket:schuko!=0
This tagrendering has labels
@@ -385,13 +387,15 @@ The question is `How much plugs of type European wall plug with ground pi
*There are {socket:typee} plugs of type European wall plug with ground pin (CEE7/4 type E) available here* is shown if `socket:typee` is set
This tagrendering is only visible in the popup if the following condition is met: socket:typee~.+ & socket:typee!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:typee
The question is `What voltage do the plugs with European wall plug with ground pin (CEE7/4 type E) offer?`
*European wall plug with ground pin (CEE7/4 type E) outputs {canonical(socket:typee:voltage)}* is shown if `socket:typee:voltage` is set
- - *European wall plug with ground pin (CEE7/4 type E) outputs 230 volt* is shown if with socket:typee:voltage=230 V
+ - *European wall plug with ground pin (CEE7/4 type E) outputs 230 volt* is shown if with socket:typee:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:typee~.+ & socket:typee!=0
This tagrendering has labels
@@ -402,7 +406,7 @@ This tagrendering has labels
The question is `What current do the plugs with European wall plug with ground pin (CEE7/4 type E) offer?`
*European wall plug with ground pin (CEE7/4 type E) outputs at most {canonical(socket:typee:current)}* is shown if `socket:typee:current` is set
- - *European wall plug with ground pin (CEE7/4 type E) outputs at most 16 A* is shown if with socket:typee:current=16 A
+ - *European wall plug with ground pin (CEE7/4 type E) outputs at most 16 A* is shown if with socket:typee:current=16
This tagrendering is only visible in the popup if the following condition is met: socket:typee~.+ & socket:typee!=0
This tagrendering has labels
@@ -413,8 +417,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type European wall plug with ground pin (CEE7/4 type E) offer?`
*European wall plug with ground pin (CEE7/4 type E) outputs at most {canonical(socket:typee:output)}* is shown if `socket:typee:output` is set
- - *European wall plug with ground pin (CEE7/4 type E) outputs at most 3 kW A* is shown if with socket:typee:output=3 kW
- - *European wall plug with ground pin (CEE7/4 type E) outputs at most 22 kW A* is shown if with socket:typee:output=22 kW
+ - *European wall plug with ground pin (CEE7/4 type E) outputs at most 3 kW* is shown if with socket:typee:output=3 kW
+ - *European wall plug with ground pin (CEE7/4 type E) outputs at most 22 kW* is shown if with socket:typee:output=22 kW
This tagrendering is only visible in the popup if the following condition is met: socket:typee~.+ & socket:typee!=0
This tagrendering has labels
@@ -426,13 +430,15 @@ The question is `How much plugs of type Chademo are available here?`
*There are {socket:chademo} plugs of type Chademo available here* is shown if `socket:chademo` is set
This tagrendering is only visible in the popup if the following condition is met: socket:chademo~.+ & socket:chademo!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:chademo
The question is `What voltage do the plugs with Chademo offer?`
*Chademo outputs {canonical(socket:chademo:voltage)}* is shown if `socket:chademo:voltage` is set
- - *Chademo outputs 500 volt* is shown if with socket:chademo:voltage=500 V
+ - *Chademo outputs 500 volt* is shown if with socket:chademo:voltage=500
This tagrendering is only visible in the popup if the following condition is met: socket:chademo~.+ & socket:chademo!=0
This tagrendering has labels
@@ -443,7 +449,7 @@ This tagrendering has labels
The question is `What current do the plugs with Chademo offer?`
*Chademo outputs at most {canonical(socket:chademo:current)}* is shown if `socket:chademo:current` is set
- - *Chademo outputs at most 120 A* is shown if with socket:chademo:current=120 A
+ - *Chademo outputs at most 120 A* is shown if with socket:chademo:current=120
This tagrendering is only visible in the popup if the following condition is met: socket:chademo~.+ & socket:chademo!=0
This tagrendering has labels
@@ -454,7 +460,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type Chademo offer?`
*Chademo outputs at most {canonical(socket:chademo:output)}* is shown if `socket:chademo:output` is set
- - *Chademo outputs at most 50 kW A* is shown if with socket:chademo:output=50 kW
+ - *Chademo outputs at most 50 kW* is shown if with socket:chademo:output=50 kW
This tagrendering is only visible in the popup if the following condition is met: socket:chademo~.+ & socket:chademo!=0
This tagrendering has labels
@@ -466,14 +472,16 @@ The question is `How much plugs of type Type 1 with cable (J1772) are ava
*There are {socket:type1_cable} plugs of type Type 1 with cable (J1772) available here* is shown if `socket:type1_cable` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type1_cable~.+ & socket:type1_cable!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type1_cable
The question is `What voltage do the plugs with Type 1 with cable (J1772) offer?`
*Type 1 with cable (J1772) outputs {canonical(socket:type1_cable:voltage)}* is shown if `socket:type1_cable:voltage` is set
- - *Type 1 with cable (J1772) outputs 200 volt* is shown if with socket:type1_cable:voltage=200 V
- - *Type 1 with cable (J1772) outputs 240 volt* is shown if with socket:type1_cable:voltage=240 V
+ - *Type 1 with cable (J1772) outputs 200 volt* is shown if with socket:type1_cable:voltage=200
+ - *Type 1 with cable (J1772) outputs 240 volt* is shown if with socket:type1_cable:voltage=240
This tagrendering is only visible in the popup if the following condition is met: socket:type1_cable~.+ & socket:type1_cable!=0
This tagrendering has labels
@@ -484,7 +492,7 @@ This tagrendering has labels
The question is `What current do the plugs with Type 1 with cable (J1772) offer?`
*Type 1 with cable (J1772) outputs at most {canonical(socket:type1_cable:current)}* is shown if `socket:type1_cable:current` is set
- - *Type 1 with cable (J1772) outputs at most 32 A* is shown if with socket:type1_cable:current=32 A
+ - *Type 1 with cable (J1772) outputs at most 32 A* is shown if with socket:type1_cable:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:type1_cable~.+ & socket:type1_cable!=0
This tagrendering has labels
@@ -495,8 +503,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 1 with cable (J1772) offer?`
*Type 1 with cable (J1772) outputs at most {canonical(socket:type1_cable:output)}* is shown if `socket:type1_cable:output` is set
- - *Type 1 with cable (J1772) outputs at most 3.7 kW A* is shown if with socket:type1_cable:output=3.7 kW
- - *Type 1 with cable (J1772) outputs at most 7 kW A* is shown if with socket:type1_cable:output=7 kW
+ - *Type 1 with cable (J1772) outputs at most 3.7 kW* is shown if with socket:type1_cable:output=3.7 kW
+ - *Type 1 with cable (J1772) outputs at most 7 kW* is shown if with socket:type1_cable:output=7 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type1_cable~.+ & socket:type1_cable!=0
This tagrendering has labels
@@ -508,14 +516,16 @@ The question is `How much plugs of type Type 1 without cable (J177
*There are {socket:type1} plugs of type Type 1 without cable (J1772) available here* is shown if `socket:type1` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type1~.+ & socket:type1!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type1
The question is `What voltage do the plugs with Type 1 without cable (J1772) offer?`
*Type 1 without cable (J1772) outputs {canonical(socket:type1:voltage)}* is shown if `socket:type1:voltage` is set
- - *Type 1 without cable (J1772) outputs 200 volt* is shown if with socket:type1:voltage=200 V
- - *Type 1 without cable (J1772) outputs 240 volt* is shown if with socket:type1:voltage=240 V
+ - *Type 1 without cable (J1772) outputs 200 volt* is shown if with socket:type1:voltage=200
+ - *Type 1 without cable (J1772) outputs 240 volt* is shown if with socket:type1:voltage=240
This tagrendering is only visible in the popup if the following condition is met: socket:type1~.+ & socket:type1!=0
This tagrendering has labels
@@ -526,7 +536,7 @@ This tagrendering has labels
The question is `What current do the plugs with Type 1 without cable (J1772) offer?`
*Type 1 without cable (J1772) outputs at most {canonical(socket:type1:current)}* is shown if `socket:type1:current` is set
- - *Type 1 without cable (J1772) outputs at most 32 A* is shown if with socket:type1:current=32 A
+ - *Type 1 without cable (J1772) outputs at most 32 A* is shown if with socket:type1:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:type1~.+ & socket:type1!=0
This tagrendering has labels
@@ -537,10 +547,10 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 1 without cable (J1772) offer?`
*Type 1 without cable (J1772) outputs at most {canonical(socket:type1:output)}* is shown if `socket:type1:output` is set
- - *Type 1 without cable (J1772) outputs at most 3.7 kW A* is shown if with socket:type1:output=3.7 kW
- - *Type 1 without cable (J1772) outputs at most 6.6 kW A* is shown if with socket:type1:output=6.6 kW
- - *Type 1 without cable (J1772) outputs at most 7 kW A* is shown if with socket:type1:output=7 kW
- - *Type 1 without cable (J1772) outputs at most 7.2 kW A* is shown if with socket:type1:output=7.2 kW
+ - *Type 1 without cable (J1772) outputs at most 3.7 kW* is shown if with socket:type1:output=3.7 kW
+ - *Type 1 without cable (J1772) outputs at most 6.6 kW* is shown if with socket:type1:output=6.6 kW
+ - *Type 1 without cable (J1772) outputs at most 7 kW* is shown if with socket:type1:output=7 kW
+ - *Type 1 without cable (J1772) outputs at most 7.2 kW* is shown if with socket:type1:output=7.2 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type1~.+ & socket:type1!=0
This tagrendering has labels
@@ -552,14 +562,16 @@ The question is `How much plugs of type Type 1 CCS (aka Type 1 Combo) are
*There are {socket:type1_combo} plugs of type Type 1 CCS (aka Type 1 Combo) available here* is shown if `socket:type1_combo` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type1_combo~.+ & socket:type1_combo!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type1_combo
The question is `What voltage do the plugs with Type 1 CCS (aka Type 1 Combo) offer?`
*Type 1 CCS (aka Type 1 Combo) outputs {canonical(socket:type1_combo:voltage)}* is shown if `socket:type1_combo:voltage` is set
- - *Type 1 CCS (aka Type 1 Combo) outputs 400 volt* is shown if with socket:type1_combo:voltage=400 V
- - *Type 1 CCS (aka Type 1 Combo) outputs 1000 volt* is shown if with socket:type1_combo:voltage=1000 V
+ - *Type 1 CCS (aka Type 1 Combo) outputs 400 volt* is shown if with socket:type1_combo:voltage=400
+ - *Type 1 CCS (aka Type 1 Combo) outputs 1000 volt* is shown if with socket:type1_combo:voltage=1000
This tagrendering is only visible in the popup if the following condition is met: socket:type1_combo~.+ & socket:type1_combo!=0
This tagrendering has labels
@@ -570,8 +582,8 @@ This tagrendering has labels
The question is `What current do the plugs with Type 1 CCS (aka Type 1 Combo) offer?`
*Type 1 CCS (aka Type 1 Combo) outputs at most {canonical(socket:type1_combo:current)}* is shown if `socket:type1_combo:current` is set
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 50 A* is shown if with socket:type1_combo:current=50 A
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 125 A* is shown if with socket:type1_combo:current=125 A
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 50 A* is shown if with socket:type1_combo:current=50
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 125 A* is shown if with socket:type1_combo:current=125
This tagrendering is only visible in the popup if the following condition is met: socket:type1_combo~.+ & socket:type1_combo!=0
This tagrendering has labels
@@ -582,10 +594,10 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 1 CCS (aka Type 1 Combo) offer?`
*Type 1 CCS (aka Type 1 Combo) outputs at most {canonical(socket:type1_combo:output)}* is shown if `socket:type1_combo:output` is set
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 50 kW A* is shown if with socket:type1_combo:output=50 kW
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 62.5 kW A* is shown if with socket:type1_combo:output=62.5 kW
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 150 kW A* is shown if with socket:type1_combo:output=150 kW
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 350 kW A* is shown if with socket:type1_combo:output=350 kW
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 50 kW* is shown if with socket:type1_combo:output=50 kW
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 62.5 kW* is shown if with socket:type1_combo:output=62.5 kW
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 150 kW* is shown if with socket:type1_combo:output=150 kW
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 350 kW* is shown if with socket:type1_combo:output=350 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type1_combo~.+ & socket:type1_combo!=0
This tagrendering has labels
@@ -597,13 +609,15 @@ The question is `How much plugs of type Tesla Supercharger are available
*There are {socket:tesla_supercharger} plugs of type Tesla Supercharger available here* is shown if `socket:tesla_supercharger` is set
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:tesla_supercharger
The question is `What voltage do the plugs with Tesla Supercharger offer?`
*Tesla Supercharger outputs {canonical(socket:tesla_supercharger:voltage)}* is shown if `socket:tesla_supercharger:voltage` is set
- - *Tesla Supercharger outputs 480 volt* is shown if with socket:tesla_supercharger:voltage=480 V
+ - *Tesla Supercharger outputs 480 volt* is shown if with socket:tesla_supercharger:voltage=480
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0
This tagrendering has labels
@@ -614,8 +628,8 @@ This tagrendering has labels
The question is `What current do the plugs with Tesla Supercharger offer?`
*Tesla Supercharger outputs at most {canonical(socket:tesla_supercharger:current)}* is shown if `socket:tesla_supercharger:current` is set
- - *Tesla Supercharger outputs at most 125 A* is shown if with socket:tesla_supercharger:current=125 A
- - *Tesla Supercharger outputs at most 350 A* is shown if with socket:tesla_supercharger:current=350 A
+ - *Tesla Supercharger outputs at most 125 A* is shown if with socket:tesla_supercharger:current=125
+ - *Tesla Supercharger outputs at most 350 A* is shown if with socket:tesla_supercharger:current=350
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0
This tagrendering has labels
@@ -626,9 +640,9 @@ This tagrendering has labels
The question is `What power output does a single plug of type Tesla Supercharger offer?`
*Tesla Supercharger outputs at most {canonical(socket:tesla_supercharger:output)}* is shown if `socket:tesla_supercharger:output` is set
- - *Tesla Supercharger outputs at most 120 kW A* is shown if with socket:tesla_supercharger:output=120 kW
- - *Tesla Supercharger outputs at most 150 kW A* is shown if with socket:tesla_supercharger:output=150 kW
- - *Tesla Supercharger outputs at most 250 kW A* is shown if with socket:tesla_supercharger:output=250 kW
+ - *Tesla Supercharger outputs at most 120 kW* is shown if with socket:tesla_supercharger:output=120 kW
+ - *Tesla Supercharger outputs at most 150 kW* is shown if with socket:tesla_supercharger:output=150 kW
+ - *Tesla Supercharger outputs at most 250 kW* is shown if with socket:tesla_supercharger:output=250 kW
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0
This tagrendering has labels
@@ -640,14 +654,16 @@ The question is `How much plugs of type Type 2 (mennekes) are available h
*There are {socket:type2} plugs of type Type 2 (mennekes) available here* is shown if `socket:type2` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type2~.+ & socket:type2!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type2
The question is `What voltage do the plugs with Type 2 (mennekes) offer?`
*Type 2 (mennekes) outputs {canonical(socket:type2:voltage)}* is shown if `socket:type2:voltage` is set
- - *Type 2 (mennekes) outputs 230 volt* is shown if with socket:type2:voltage=230 V
- - *Type 2 (mennekes) outputs 400 volt* is shown if with socket:type2:voltage=400 V
+ - *Type 2 (mennekes) outputs 230 volt* is shown if with socket:type2:voltage=230
+ - *Type 2 (mennekes) outputs 400 volt* is shown if with socket:type2:voltage=400
This tagrendering is only visible in the popup if the following condition is met: socket:type2~.+ & socket:type2!=0
This tagrendering has labels
@@ -658,8 +674,8 @@ This tagrendering has labels
The question is `What current do the plugs with Type 2 (mennekes) offer?`
*Type 2 (mennekes) outputs at most {canonical(socket:type2:current)}* is shown if `socket:type2:current` is set
- - *Type 2 (mennekes) outputs at most 16 A* is shown if with socket:type2:current=16 A
- - *Type 2 (mennekes) outputs at most 32 A* is shown if with socket:type2:current=32 A
+ - *Type 2 (mennekes) outputs at most 16 A* is shown if with socket:type2:current=16
+ - *Type 2 (mennekes) outputs at most 32 A* is shown if with socket:type2:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:type2~.+ & socket:type2!=0
This tagrendering has labels
@@ -670,8 +686,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 2 (mennekes) offer?`
*Type 2 (mennekes) outputs at most {canonical(socket:type2:output)}* is shown if `socket:type2:output` is set
- - *Type 2 (mennekes) outputs at most 11 kW A* is shown if with socket:type2:output=11 kW
- - *Type 2 (mennekes) outputs at most 22 kW A* is shown if with socket:type2:output=22 kW
+ - *Type 2 (mennekes) outputs at most 11 kW* is shown if with socket:type2:output=11 kW
+ - *Type 2 (mennekes) outputs at most 22 kW* is shown if with socket:type2:output=22 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type2~.+ & socket:type2!=0
This tagrendering has labels
@@ -683,14 +699,16 @@ The question is `How much plugs of type Type 2 CCS (mennekes) are availab
*There are {socket:type2_combo} plugs of type Type 2 CCS (mennekes) available here* is shown if `socket:type2_combo` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type2_combo~.+ & socket:type2_combo!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type2_combo
The question is `What voltage do the plugs with Type 2 CCS (mennekes) offer?`
*Type 2 CCS (mennekes) outputs {canonical(socket:type2_combo:voltage)}* is shown if `socket:type2_combo:voltage` is set
- - *Type 2 CCS (mennekes) outputs 500 volt* is shown if with socket:type2_combo:voltage=500 V
- - *Type 2 CCS (mennekes) outputs 920 volt* is shown if with socket:type2_combo:voltage=920 V
+ - *Type 2 CCS (mennekes) outputs 500 volt* is shown if with socket:type2_combo:voltage=500
+ - *Type 2 CCS (mennekes) outputs 920 volt* is shown if with socket:type2_combo:voltage=920
This tagrendering is only visible in the popup if the following condition is met: socket:type2_combo~.+ & socket:type2_combo!=0
This tagrendering has labels
@@ -701,8 +719,8 @@ This tagrendering has labels
The question is `What current do the plugs with Type 2 CCS (mennekes) offer?`
*Type 2 CCS (mennekes) outputs at most {canonical(socket:type2_combo:current)}* is shown if `socket:type2_combo:current` is set
- - *Type 2 CCS (mennekes) outputs at most 125 A* is shown if with socket:type2_combo:current=125 A
- - *Type 2 CCS (mennekes) outputs at most 350 A* is shown if with socket:type2_combo:current=350 A
+ - *Type 2 CCS (mennekes) outputs at most 125 A* is shown if with socket:type2_combo:current=125
+ - *Type 2 CCS (mennekes) outputs at most 350 A* is shown if with socket:type2_combo:current=350
This tagrendering is only visible in the popup if the following condition is met: socket:type2_combo~.+ & socket:type2_combo!=0
This tagrendering has labels
@@ -713,7 +731,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 2 CCS (mennekes) offer?`
*Type 2 CCS (mennekes) outputs at most {canonical(socket:type2_combo:output)}* is shown if `socket:type2_combo:output` is set
- - *Type 2 CCS (mennekes) outputs at most 50 kW A* is shown if with socket:type2_combo:output=50 kW
+ - *Type 2 CCS (mennekes) outputs at most 50 kW* is shown if with socket:type2_combo:output=50 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type2_combo~.+ & socket:type2_combo!=0
This tagrendering has labels
@@ -725,14 +743,16 @@ The question is `How much plugs of type Type 2 with cable (mennekes) are
*There are {socket:type2_cable} plugs of type Type 2 with cable (mennekes) available here* is shown if `socket:type2_cable` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type2_cable~.+ & socket:type2_cable!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type2_cable
The question is `What voltage do the plugs with Type 2 with cable (mennekes) offer?`
*Type 2 with cable (mennekes) outputs {canonical(socket:type2_cable:voltage)}* is shown if `socket:type2_cable:voltage` is set
- - *Type 2 with cable (mennekes) outputs 230 volt* is shown if with socket:type2_cable:voltage=230 V
- - *Type 2 with cable (mennekes) outputs 400 volt* is shown if with socket:type2_cable:voltage=400 V
+ - *Type 2 with cable (mennekes) outputs 230 volt* is shown if with socket:type2_cable:voltage=230
+ - *Type 2 with cable (mennekes) outputs 400 volt* is shown if with socket:type2_cable:voltage=400
This tagrendering is only visible in the popup if the following condition is met: socket:type2_cable~.+ & socket:type2_cable!=0
This tagrendering has labels
@@ -743,8 +763,8 @@ This tagrendering has labels
The question is `What current do the plugs with Type 2 with cable (mennekes) offer?`
*Type 2 with cable (mennekes) outputs at most {canonical(socket:type2_cable:current)}* is shown if `socket:type2_cable:current` is set
- - *Type 2 with cable (mennekes) outputs at most 16 A* is shown if with socket:type2_cable:current=16 A
- - *Type 2 with cable (mennekes) outputs at most 32 A* is shown if with socket:type2_cable:current=32 A
+ - *Type 2 with cable (mennekes) outputs at most 16 A* is shown if with socket:type2_cable:current=16
+ - *Type 2 with cable (mennekes) outputs at most 32 A* is shown if with socket:type2_cable:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:type2_cable~.+ & socket:type2_cable!=0
This tagrendering has labels
@@ -755,8 +775,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 2 with cable (mennekes) offer?`
*Type 2 with cable (mennekes) outputs at most {canonical(socket:type2_cable:output)}* is shown if `socket:type2_cable:output` is set
- - *Type 2 with cable (mennekes) outputs at most 11 kW A* is shown if with socket:type2_cable:output=11 kW
- - *Type 2 with cable (mennekes) outputs at most 22 kW A* is shown if with socket:type2_cable:output=22 kW
+ - *Type 2 with cable (mennekes) outputs at most 11 kW* is shown if with socket:type2_cable:output=11 kW
+ - *Type 2 with cable (mennekes) outputs at most 22 kW* is shown if with socket:type2_cable:output=22 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type2_cable~.+ & socket:type2_cable!=0
This tagrendering has labels
@@ -768,14 +788,16 @@ The question is `How much plugs of type Tesla Supercharger CCS (a branded
*There are {socket:tesla_supercharger_ccs} plugs of type Tesla Supercharger CCS (a branded type2_css) available here* is shown if `socket:tesla_supercharger_ccs` is set
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:tesla_supercharger_ccs
The question is `What voltage do the plugs with Tesla Supercharger CCS (a branded type2_css) offer?`
*Tesla Supercharger CCS (a branded type2_css) outputs {canonical(socket:tesla_supercharger_ccs:voltage)}* is shown if `socket:tesla_supercharger_ccs:voltage` is set
- - *Tesla Supercharger CCS (a branded type2_css) outputs 500 volt* is shown if with socket:tesla_supercharger_ccs:voltage=500 V
- - *Tesla Supercharger CCS (a branded type2_css) outputs 920 volt* is shown if with socket:tesla_supercharger_ccs:voltage=920 V
+ - *Tesla Supercharger CCS (a branded type2_css) outputs 500 volt* is shown if with socket:tesla_supercharger_ccs:voltage=500
+ - *Tesla Supercharger CCS (a branded type2_css) outputs 920 volt* is shown if with socket:tesla_supercharger_ccs:voltage=920
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0
This tagrendering has labels
@@ -786,8 +808,8 @@ This tagrendering has labels
The question is `What current do the plugs with Tesla Supercharger CCS (a branded type2_css) offer?`
*Tesla Supercharger CCS (a branded type2_css) outputs at most {canonical(socket:tesla_supercharger_ccs:current)}* is shown if `socket:tesla_supercharger_ccs:current` is set
- - *Tesla Supercharger CCS (a branded type2_css) outputs at most 125 A* is shown if with socket:tesla_supercharger_ccs:current=125 A
- - *Tesla Supercharger CCS (a branded type2_css) outputs at most 350 A* is shown if with socket:tesla_supercharger_ccs:current=350 A
+ - *Tesla Supercharger CCS (a branded type2_css) outputs at most 125 A* is shown if with socket:tesla_supercharger_ccs:current=125
+ - *Tesla Supercharger CCS (a branded type2_css) outputs at most 350 A* is shown if with socket:tesla_supercharger_ccs:current=350
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0
This tagrendering has labels
@@ -798,7 +820,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type Tesla Supercharger CCS (a branded type2_css) offer?`
*Tesla Supercharger CCS (a branded type2_css) outputs at most {canonical(socket:tesla_supercharger_ccs:output)}* is shown if `socket:tesla_supercharger_ccs:output` is set
- - *Tesla Supercharger CCS (a branded type2_css) outputs at most 50 kW A* is shown if with socket:tesla_supercharger_ccs:output=50 kW
+ - *Tesla Supercharger CCS (a branded type2_css) outputs at most 50 kW* is shown if with socket:tesla_supercharger_ccs:output=50 kW
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0
This tagrendering has labels
@@ -810,13 +832,15 @@ The question is `How much plugs of type Tesla Supercharger (destination)
*There are {socket:tesla_destination} plugs of type Tesla Supercharger (destination) available here* is shown if `socket:tesla_destination` is set
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:tesla_destination_us
The question is `What voltage do the plugs with Tesla Supercharger (destination) offer?`
*Tesla Supercharger (destination) outputs {canonical(socket:tesla_destination:voltage)}* is shown if `socket:tesla_destination:voltage` is set
- - *Tesla Supercharger (destination) outputs 480 volt* is shown if with socket:tesla_destination:voltage=480 V
+ - *Tesla Supercharger (destination) outputs 480 volt* is shown if with socket:tesla_destination:voltage=480
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -827,8 +851,8 @@ This tagrendering has labels
The question is `What current do the plugs with Tesla Supercharger (destination) offer?`
*Tesla Supercharger (destination) outputs at most {canonical(socket:tesla_destination:current)}* is shown if `socket:tesla_destination:current` is set
- - *Tesla Supercharger (destination) outputs at most 125 A* is shown if with socket:tesla_destination:current=125 A
- - *Tesla Supercharger (destination) outputs at most 350 A* is shown if with socket:tesla_destination:current=350 A
+ - *Tesla Supercharger (destination) outputs at most 125 A* is shown if with socket:tesla_destination:current=125
+ - *Tesla Supercharger (destination) outputs at most 350 A* is shown if with socket:tesla_destination:current=350
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -839,9 +863,9 @@ This tagrendering has labels
The question is `What power output does a single plug of type Tesla Supercharger (destination) offer?`
*Tesla Supercharger (destination) outputs at most {canonical(socket:tesla_destination:output)}* is shown if `socket:tesla_destination:output` is set
- - *Tesla Supercharger (destination) outputs at most 120 kW A* is shown if with socket:tesla_destination:output=120 kW
- - *Tesla Supercharger (destination) outputs at most 150 kW A* is shown if with socket:tesla_destination:output=150 kW
- - *Tesla Supercharger (destination) outputs at most 250 kW A* is shown if with socket:tesla_destination:output=250 kW
+ - *Tesla Supercharger (destination) outputs at most 120 kW* is shown if with socket:tesla_destination:output=120 kW
+ - *Tesla Supercharger (destination) outputs at most 150 kW* is shown if with socket:tesla_destination:output=150 kW
+ - *Tesla Supercharger (destination) outputs at most 250 kW* is shown if with socket:tesla_destination:output=250 kW
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -853,14 +877,16 @@ The question is `How much plugs of type Tesla supercharger (destination)
*There are {socket:tesla_destination} plugs of type Tesla supercharger (destination) (A Type 2 with cable branded as tesla) available here* is shown if `socket:tesla_destination` is set
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:tesla_destination
The question is `What voltage do the plugs with Tesla supercharger (destination) (A Type 2 with cable branded as tesla) offer?`
*Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs {canonical(socket:tesla_destination:voltage)}* is shown if `socket:tesla_destination:voltage` is set
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 230 volt* is shown if with socket:tesla_destination:voltage=230 V
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 400 volt* is shown if with socket:tesla_destination:voltage=400 V
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 230 volt* is shown if with socket:tesla_destination:voltage=230
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 400 volt* is shown if with socket:tesla_destination:voltage=400
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -871,8 +897,8 @@ This tagrendering has labels
The question is `What current do the plugs with Tesla supercharger (destination) (A Type 2 with cable branded as tesla) offer?`
*Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most {canonical(socket:tesla_destination:current)}* is shown if `socket:tesla_destination:current` is set
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 16 A* is shown if with socket:tesla_destination:current=16 A
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 32 A* is shown if with socket:tesla_destination:current=32 A
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 16 A* is shown if with socket:tesla_destination:current=16
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 32 A* is shown if with socket:tesla_destination:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -883,8 +909,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type Tesla supercharger (destination) (A Type 2 with cable branded as tesla) offer?`
*Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most {canonical(socket:tesla_destination:output)}* is shown if `socket:tesla_destination:output` is set
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 11 kW A* is shown if with socket:tesla_destination:output=11 kW
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 22 kW A* is shown if with socket:tesla_destination:output=22 kW
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 11 kW* is shown if with socket:tesla_destination:output=11 kW
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 22 kW* is shown if with socket:tesla_destination:output=22 kW
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -896,13 +922,15 @@ The question is `How much plugs of type USB to charge phones and small el
*There are {socket:USB-A} plugs of type USB to charge phones and small electronics available here* is shown if `socket:USB-A` is set
This tagrendering is only visible in the popup if the following condition is met: socket:USB-A~.+ & socket:USB-A!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:USB-A
The question is `What voltage do the plugs with USB to charge phones and small electronics offer?`
*USB to charge phones and small electronics outputs {canonical(socket:USB-A:voltage)}* is shown if `socket:USB-A:voltage` is set
- - *USB to charge phones and small electronics outputs 5 volt* is shown if with socket:USB-A:voltage=5 V
+ - *USB to charge phones and small electronics outputs 5 volt* is shown if with socket:USB-A:voltage=5
This tagrendering is only visible in the popup if the following condition is met: socket:USB-A~.+ & socket:USB-A!=0
This tagrendering has labels
@@ -913,8 +941,8 @@ This tagrendering has labels
The question is `What current do the plugs with USB to charge phones and small electronics offer?`
*USB to charge phones and small electronics outputs at most {canonical(socket:USB-A:current)}* is shown if `socket:USB-A:current` is set
- - *USB to charge phones and small electronics outputs at most 1 A* is shown if with socket:USB-A:current=1 A
- - *USB to charge phones and small electronics outputs at most 2 A* is shown if with socket:USB-A:current=2 A
+ - *USB to charge phones and small electronics outputs at most 1 A* is shown if with socket:USB-A:current=1
+ - *USB to charge phones and small electronics outputs at most 2 A* is shown if with socket:USB-A:current=2
This tagrendering is only visible in the popup if the following condition is met: socket:USB-A~.+ & socket:USB-A!=0
This tagrendering has labels
@@ -925,8 +953,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type USB to charge phones and small electronics offer?`
*USB to charge phones and small electronics outputs at most {canonical(socket:USB-A:output)}* is shown if `socket:USB-A:output` is set
- - *USB to charge phones and small electronics outputs at most 5W A* is shown if with socket:USB-A:output=5W
- - *USB to charge phones and small electronics outputs at most 10W A* is shown if with socket:USB-A:output=10W
+ - *USB to charge phones and small electronics outputs at most 5W* is shown if with socket:USB-A:output=5W
+ - *USB to charge phones and small electronics outputs at most 10W* is shown if with socket:USB-A:output=10W
This tagrendering is only visible in the popup if the following condition is met: socket:USB-A~.+ & socket:USB-A!=0
This tagrendering has labels
@@ -938,6 +966,8 @@ The question is `How much plugs of type Bosch Active Connect with 3 pins
*There are {socket:bosch_3pin} plugs of type Bosch Active Connect with 3 pins and cable available here* is shown if `socket:bosch_3pin` is set
This tagrendering is only visible in the popup if the following condition is met: socket:bosch_3pin~.+ & socket:bosch_3pin!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:bosch_3pin
@@ -972,6 +1002,8 @@ The question is `How much plugs of type Bosch Active Connect with 5 pins
*There are {socket:bosch_5pin} plugs of type Bosch Active Connect with 5 pins and cable available here* is shown if `socket:bosch_5pin` is set
This tagrendering is only visible in the popup if the following condition is met: socket:bosch_5pin~.+ & socket:bosch_5pin!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:bosch_5pin
@@ -1006,13 +1038,15 @@ The question is `How much plugs of type BS1363 (Type G) are available her
*There are {socket:bs1363} plugs of type BS1363 (Type G) available here* is shown if `socket:bs1363` is set
This tagrendering is only visible in the popup if the following condition is met: socket:bs1363~.+ & socket:bs1363!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:bs1363
The question is `What voltage do the plugs with BS1363 (Type G) offer?`
*BS1363 (Type G) outputs {canonical(socket:bs1363:voltage)}* is shown if `socket:bs1363:voltage` is set
- - *BS1363 (Type G) outputs 230 volt* is shown if with socket:bs1363:voltage=230 V
+ - *BS1363 (Type G) outputs 230 volt* is shown if with socket:bs1363:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:bs1363~.+ & socket:bs1363!=0
This tagrendering has labels
@@ -1023,7 +1057,7 @@ This tagrendering has labels
The question is `What current do the plugs with BS1363 (Type G) offer?`
*BS1363 (Type G) outputs at most {canonical(socket:bs1363:current)}* is shown if `socket:bs1363:current` is set
- - *BS1363 (Type G) outputs at most 13 A* is shown if with socket:bs1363:current=13 A
+ - *BS1363 (Type G) outputs at most 13 A* is shown if with socket:bs1363:current=13
This tagrendering is only visible in the popup if the following condition is met: socket:bs1363~.+ & socket:bs1363!=0
This tagrendering has labels
@@ -1034,7 +1068,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type BS1363 (Type G) offer?`
*BS1363 (Type G) outputs at most {canonical(socket:bs1363:output)}* is shown if `socket:bs1363:output` is set
- - *BS1363 (Type G) outputs at most 3kW A* is shown if with socket:bs1363:output=3kW
+ - *BS1363 (Type G) outputs at most 3kW* is shown if with socket:bs1363:output=3kW
This tagrendering is only visible in the popup if the following condition is met: socket:bs1363~.+ & socket:bs1363!=0
This tagrendering has labels
@@ -1046,13 +1080,15 @@ The question is `How much plugs of type NEMA 5-15 (Type B) are available
*There are {socket:nema5_15} plugs of type NEMA 5-15 (Type B) available here* is shown if `socket:nema5_15` is set
This tagrendering is only visible in the popup if the following condition is met: socket:nema5_15~.+ & socket:nema5_15!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:nema5_15
The question is `What voltage do the plugs with NEMA 5-15 (Type B) offer?`
*NEMA 5-15 (Type B) outputs {canonical(socket:nema5_15:voltage)}* is shown if `socket:nema5_15:voltage` is set
- - *NEMA 5-15 (Type B) outputs 120 volt* is shown if with socket:nema5_15:voltage=120 V
+ - *NEMA 5-15 (Type B) outputs 120 volt* is shown if with socket:nema5_15:voltage=120
This tagrendering is only visible in the popup if the following condition is met: socket:nema5_15~.+ & socket:nema5_15!=0
This tagrendering has labels
@@ -1063,7 +1099,7 @@ This tagrendering has labels
The question is `What current do the plugs with NEMA 5-15 (Type B) offer?`
*NEMA 5-15 (Type B) outputs at most {canonical(socket:nema5_15:current)}* is shown if `socket:nema5_15:current` is set
- - *NEMA 5-15 (Type B) outputs at most 15 A* is shown if with socket:nema5_15:current=15 A
+ - *NEMA 5-15 (Type B) outputs at most 15 A* is shown if with socket:nema5_15:current=15
This tagrendering is only visible in the popup if the following condition is met: socket:nema5_15~.+ & socket:nema5_15!=0
This tagrendering has labels
@@ -1074,7 +1110,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type NEMA 5-15 (Type B) offer?`
*NEMA 5-15 (Type B) outputs at most {canonical(socket:nema5_15:output)}* is shown if `socket:nema5_15:output` is set
- - *NEMA 5-15 (Type B) outputs at most 1.8 kW A* is shown if with socket:nema5_15:output=1.8 kW
+ - *NEMA 5-15 (Type B) outputs at most 1.8 kW* is shown if with socket:nema5_15:output=1.8 kW
This tagrendering is only visible in the popup if the following condition is met: socket:nema5_15~.+ & socket:nema5_15!=0
This tagrendering has labels
@@ -1086,13 +1122,15 @@ The question is `How much plugs of type SEV 1011 T23 (Type J) are availab
*There are {socket:sev1011_t23} plugs of type SEV 1011 T23 (Type J) available here* is shown if `socket:sev1011_t23` is set
This tagrendering is only visible in the popup if the following condition is met: socket:sev1011_t23~.+ & socket:sev1011_t23!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:sev1011_t23
The question is `What voltage do the plugs with SEV 1011 T23 (Type J) offer?`
*SEV 1011 T23 (Type J) outputs {canonical(socket:sev1011_t23:voltage)}* is shown if `socket:sev1011_t23:voltage` is set
- - *SEV 1011 T23 (Type J) outputs 230 volt* is shown if with socket:sev1011_t23:voltage=230 V
+ - *SEV 1011 T23 (Type J) outputs 230 volt* is shown if with socket:sev1011_t23:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:sev1011_t23~.+ & socket:sev1011_t23!=0
This tagrendering has labels
@@ -1103,7 +1141,7 @@ This tagrendering has labels
The question is `What current do the plugs with SEV 1011 T23 (Type J) offer?`
*SEV 1011 T23 (Type J) outputs at most {canonical(socket:sev1011_t23:current)}* is shown if `socket:sev1011_t23:current` is set
- - *SEV 1011 T23 (Type J) outputs at most 16 A* is shown if with socket:sev1011_t23:current=16 A
+ - *SEV 1011 T23 (Type J) outputs at most 16 A* is shown if with socket:sev1011_t23:current=16
This tagrendering is only visible in the popup if the following condition is met: socket:sev1011_t23~.+ & socket:sev1011_t23!=0
This tagrendering has labels
@@ -1114,7 +1152,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type SEV 1011 T23 (Type J) offer?`
*SEV 1011 T23 (Type J) outputs at most {canonical(socket:sev1011_t23:output)}* is shown if `socket:sev1011_t23:output` is set
- - *SEV 1011 T23 (Type J) outputs at most 3.7 kW A* is shown if with socket:sev1011_t23:output=3.7 kW
+ - *SEV 1011 T23 (Type J) outputs at most 3.7 kW* is shown if with socket:sev1011_t23:output=3.7 kW
This tagrendering is only visible in the popup if the following condition is met: socket:sev1011_t23~.+ & socket:sev1011_t23!=0
This tagrendering has labels
@@ -1126,13 +1164,15 @@ The question is `How much plugs of type AS3112 (Type I) are available her
*There are {socket:as3112} plugs of type AS3112 (Type I) available here* is shown if `socket:as3112` is set
This tagrendering is only visible in the popup if the following condition is met: socket:as3112~.+ & socket:as3112!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:as3112
The question is `What voltage do the plugs with AS3112 (Type I) offer?`
*AS3112 (Type I) outputs {canonical(socket:as3112:voltage)}* is shown if `socket:as3112:voltage` is set
- - *AS3112 (Type I) outputs 230 volt* is shown if with socket:as3112:voltage=230 V
+ - *AS3112 (Type I) outputs 230 volt* is shown if with socket:as3112:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:as3112~.+ & socket:as3112!=0
This tagrendering has labels
@@ -1143,7 +1183,7 @@ This tagrendering has labels
The question is `What current do the plugs with AS3112 (Type I) offer?`
*AS3112 (Type I) outputs at most {canonical(socket:as3112:current)}* is shown if `socket:as3112:current` is set
- - *AS3112 (Type I) outputs at most 10 A* is shown if with socket:as3112:current=10 A
+ - *AS3112 (Type I) outputs at most 10 A* is shown if with socket:as3112:current=10
This tagrendering is only visible in the popup if the following condition is met: socket:as3112~.+ & socket:as3112!=0
This tagrendering has labels
@@ -1154,7 +1194,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type AS3112 (Type I) offer?`
*AS3112 (Type I) outputs at most {canonical(socket:as3112:output)}* is shown if `socket:as3112:output` is set
- - *AS3112 (Type I) outputs at most 2.3 kW A* is shown if with socket:as3112:output=2.3 kW
+ - *AS3112 (Type I) outputs at most 2.3 kW* is shown if with socket:as3112:output=2.3 kW
This tagrendering is only visible in the popup if the following condition is met: socket:as3112~.+ & socket:as3112!=0
This tagrendering has labels
@@ -1166,13 +1206,15 @@ The question is `How much plugs of type NEMA 5-20 (Type B) are available
*There are {socket:nema_5_20} plugs of type NEMA 5-20 (Type B) available here* is shown if `socket:nema_5_20` is set
This tagrendering is only visible in the popup if the following condition is met: socket:nema_5_20~.+ & socket:nema_5_20!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:nema_5_20
The question is `What voltage do the plugs with NEMA 5-20 (Type B) offer?`
*NEMA 5-20 (Type B) outputs {canonical(socket:nema_5_20:voltage)}* is shown if `socket:nema_5_20:voltage` is set
- - *NEMA 5-20 (Type B) outputs 120 volt* is shown if with socket:nema_5_20:voltage=120 V
+ - *NEMA 5-20 (Type B) outputs 120 volt* is shown if with socket:nema_5_20:voltage=120
This tagrendering is only visible in the popup if the following condition is met: socket:nema_5_20~.+ & socket:nema_5_20!=0
This tagrendering has labels
@@ -1183,7 +1225,7 @@ This tagrendering has labels
The question is `What current do the plugs with NEMA 5-20 (Type B) offer?`
*NEMA 5-20 (Type B) outputs at most {canonical(socket:nema_5_20:current)}* is shown if `socket:nema_5_20:current` is set
- - *NEMA 5-20 (Type B) outputs at most 20 A* is shown if with socket:nema_5_20:current=20 A
+ - *NEMA 5-20 (Type B) outputs at most 20 A* is shown if with socket:nema_5_20:current=20
This tagrendering is only visible in the popup if the following condition is met: socket:nema_5_20~.+ & socket:nema_5_20!=0
This tagrendering has labels
@@ -1194,7 +1236,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type NEMA 5-20 (Type B) offer?`
*NEMA 5-20 (Type B) outputs at most {canonical(socket:nema_5_20:output)}* is shown if `socket:nema_5_20:output` is set
- - *NEMA 5-20 (Type B) outputs at most 2.4 kW A* is shown if with socket:nema_5_20:output=2.4 kW
+ - *NEMA 5-20 (Type B) outputs at most 2.4 kW* is shown if with socket:nema_5_20:output=2.4 kW
This tagrendering is only visible in the popup if the following condition is met: socket:nema_5_20~.+ & socket:nema_5_20!=0
This tagrendering has labels
diff --git a/Docs/Layers/charging_station_ebikes.md b/Docs/Layers/charging_station_ebikes.md
index 7290ff733..d8f8b621d 100644
--- a/Docs/Layers/charging_station_ebikes.md
+++ b/Docs/Layers/charging_station_ebikes.md
@@ -151,60 +151,60 @@ Elements must match **all** of the following expressions:
| [access](https://wiki.openstreetmap.org/wiki/Key:access) | [string](../SpecialInputElements.md#string) | [yes](https://wiki.openstreetmap.org/wiki/Tag:access%3Dyes) [customers](https://wiki.openstreetmap.org/wiki/Tag:access%3Dcustomers) [key](https://wiki.openstreetmap.org/wiki/Tag:access%3Dkey) [private](https://wiki.openstreetmap.org/wiki/Tag:access%3Dprivate) [permissive](https://wiki.openstreetmap.org/wiki/Tag:access%3Dpermissive) |
| [capacity](https://wiki.openstreetmap.org/wiki/Key:capacity) | [pnat](../SpecialInputElements.md#pnat) | |
| [socket:schuko](https://wiki.openstreetmap.org/wiki/Key:socket:schuko) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:schuko:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:voltage%3D230 V) |
-| [socket:schuko:current](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:current%3D16 A) |
+| [socket:schuko:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:voltage%3D230) |
+| [socket:schuko:current](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:current%3D16) |
| [socket:schuko:output](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3.6 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:output%3D3.6 kW) |
| [socket:typee](https://wiki.openstreetmap.org/wiki/Key:socket:typee) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:typee:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:typee:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:voltage%3D230 V) |
-| [socket:typee:current](https://wiki.openstreetmap.org/wiki/Key:socket:typee:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:current%3D16 A) |
+| [socket:typee:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:typee:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:voltage%3D230) |
+| [socket:typee:current](https://wiki.openstreetmap.org/wiki/Key:socket:typee:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:current%3D16) |
| [socket:typee:output](https://wiki.openstreetmap.org/wiki/Key:socket:typee:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:output%3D3 kW) [22 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:output%3D22 kW) |
| [socket:chademo](https://wiki.openstreetmap.org/wiki/Key:socket:chademo) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:chademo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500 V](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:voltage%3D500 V) |
-| [socket:chademo:current](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [120 A](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:current%3D120 A) |
+| [socket:chademo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:voltage%3D500) |
+| [socket:chademo:current](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [120](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:current%3D120) |
| [socket:chademo:output](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:output) | [pfloat](../SpecialInputElements.md#pfloat) | [50 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:output%3D50 kW) |
| [socket:type1_cable](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type1_cable:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [200 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:voltage%3D200 V) [240 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:voltage%3D240 V) |
-| [socket:type1_cable:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:current) | [pfloat](../SpecialInputElements.md#pfloat) | [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:current%3D32 A) |
+| [socket:type1_cable:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [200](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:voltage%3D200) [240](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:voltage%3D240) |
+| [socket:type1_cable:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:current) | [pfloat](../SpecialInputElements.md#pfloat) | [32](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:current%3D32) |
| [socket:type1_cable:output](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3.7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:output%3D3.7 kW) [7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:output%3D7 kW) |
| [socket:type1](https://wiki.openstreetmap.org/wiki/Key:socket:type1) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type1:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [200 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:voltage%3D200 V) [240 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:voltage%3D240 V) |
-| [socket:type1:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1:current) | [pfloat](../SpecialInputElements.md#pfloat) | [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:current%3D32 A) |
+| [socket:type1:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [200](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:voltage%3D200) [240](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:voltage%3D240) |
+| [socket:type1:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1:current) | [pfloat](../SpecialInputElements.md#pfloat) | [32](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:current%3D32) |
| [socket:type1:output](https://wiki.openstreetmap.org/wiki/Key:socket:type1:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3.7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:output%3D3.7 kW) [6.6 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:output%3D6.6 kW) [7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:output%3D7 kW) [7.2 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:output%3D7.2 kW) |
| [socket:type1_combo](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type1_combo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [400 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:voltage%3D400 V) [1000 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:voltage%3D1000 V) |
-| [socket:type1_combo:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [50 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:current%3D50 A) [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:current%3D125 A) |
+| [socket:type1_combo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [400](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:voltage%3D400) [1000](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:voltage%3D1000) |
+| [socket:type1_combo:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [50](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:current%3D50) [125](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:current%3D125) |
| [socket:type1_combo:output](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:output) | [pfloat](../SpecialInputElements.md#pfloat) | [50 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:output%3D50 kW) [62.5 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:output%3D62.5 kW) [150 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:output%3D150 kW) [350 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:output%3D350 kW) |
| [socket:tesla_supercharger](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:tesla_supercharger:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [480 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:voltage%3D480 V) |
-| [socket:tesla_supercharger:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:current%3D125 A) [350 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:current%3D350 A) |
+| [socket:tesla_supercharger:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [480](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:voltage%3D480) |
+| [socket:tesla_supercharger:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:current%3D125) [350](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:current%3D350) |
| [socket:tesla_supercharger:output](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:output) | [pfloat](../SpecialInputElements.md#pfloat) | [120 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:output%3D120 kW) [150 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:output%3D150 kW) [250 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:output%3D250 kW) |
| [socket:type2](https://wiki.openstreetmap.org/wiki/Key:socket:type2) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type2:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:voltage%3D230 V) [400 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:voltage%3D400 V) |
-| [socket:type2:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:current%3D16 A) [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:current%3D32 A) |
+| [socket:type2:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:voltage%3D230) [400](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:voltage%3D400) |
+| [socket:type2:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:current%3D16) [32](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:current%3D32) |
| [socket:type2:output](https://wiki.openstreetmap.org/wiki/Key:socket:type2:output) | [pfloat](../SpecialInputElements.md#pfloat) | [11 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:output%3D11 kW) [22 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:output%3D22 kW) |
| [socket:type2_combo](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type2_combo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:voltage%3D500 V) [920 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:voltage%3D920 V) |
-| [socket:type2_combo:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:current%3D125 A) [350 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:current%3D350 A) |
+| [socket:type2_combo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:voltage%3D500) [920](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:voltage%3D920) |
+| [socket:type2_combo:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:current%3D125) [350](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:current%3D350) |
| [socket:type2_combo:output](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:output) | [pfloat](../SpecialInputElements.md#pfloat) | [50 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:output%3D50 kW) |
| [socket:type2_cable](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type2_cable:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:voltage%3D230 V) [400 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:voltage%3D400 V) |
-| [socket:type2_cable:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:current%3D16 A) [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:current%3D32 A) |
+| [socket:type2_cable:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:voltage%3D230) [400](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:voltage%3D400) |
+| [socket:type2_cable:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:current%3D16) [32](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:current%3D32) |
| [socket:type2_cable:output](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:output) | [pfloat](../SpecialInputElements.md#pfloat) | [11 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:output%3D11 kW) [22 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:output%3D22 kW) |
| [socket:tesla_supercharger_ccs](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:tesla_supercharger_ccs:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:voltage%3D500 V) [920 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:voltage%3D920 V) |
-| [socket:tesla_supercharger_ccs:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:current%3D125 A) [350 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:current%3D350 A) |
+| [socket:tesla_supercharger_ccs:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:voltage%3D500) [920](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:voltage%3D920) |
+| [socket:tesla_supercharger_ccs:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:current%3D125) [350](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:current%3D350) |
| [socket:tesla_supercharger_ccs:output](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:output) | [pfloat](../SpecialInputElements.md#pfloat) | [50 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:output%3D50 kW) |
| [socket:tesla_destination](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:tesla_destination:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [480 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D480 V) |
-| [socket:tesla_destination:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D125 A) [350 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D350 A) |
+| [socket:tesla_destination:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [480](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D480) |
+| [socket:tesla_destination:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D125) [350](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D350) |
| [socket:tesla_destination:output](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:output) | [pfloat](../SpecialInputElements.md#pfloat) | [120 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D120 kW) [150 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D150 kW) [250 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D250 kW) |
| [socket:tesla_destination](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:tesla_destination:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D230 V) [400 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D400 V) |
-| [socket:tesla_destination:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D16 A) [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D32 A) |
+| [socket:tesla_destination:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D230) [400](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D400) |
+| [socket:tesla_destination:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D16) [32](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D32) |
| [socket:tesla_destination:output](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:output) | [pfloat](../SpecialInputElements.md#pfloat) | [11 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D11 kW) [22 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D22 kW) |
| [socket:USB-A](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:USB-A:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [5 V](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:voltage%3D5 V) |
-| [socket:USB-A:current](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:current) | [pfloat](../SpecialInputElements.md#pfloat) | [1 A](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:current%3D1 A) [2 A](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:current%3D2 A) |
+| [socket:USB-A:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [5](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:voltage%3D5) |
+| [socket:USB-A:current](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:current) | [pfloat](../SpecialInputElements.md#pfloat) | [1](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:current%3D1) [2](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:current%3D2) |
| [socket:USB-A:output](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:output) | [pfloat](../SpecialInputElements.md#pfloat) | [5W](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:output%3D5W) [10W](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:output%3D10W) |
| [socket:bosch_3pin](https://wiki.openstreetmap.org/wiki/Key:socket:bosch_3pin) | [pnat](../SpecialInputElements.md#pnat) | |
| [socket:bosch_3pin:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:bosch_3pin:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | |
@@ -215,24 +215,24 @@ Elements must match **all** of the following expressions:
| [socket:bosch_5pin:current](https://wiki.openstreetmap.org/wiki/Key:socket:bosch_5pin:current) | [pfloat](../SpecialInputElements.md#pfloat) | |
| [socket:bosch_5pin:output](https://wiki.openstreetmap.org/wiki/Key:socket:bosch_5pin:output) | [pfloat](../SpecialInputElements.md#pfloat) | |
| [socket:bs1363](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:bs1363:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:voltage%3D230 V) |
-| [socket:bs1363:current](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:current) | [pfloat](../SpecialInputElements.md#pfloat) | [13 A](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:current%3D13 A) |
+| [socket:bs1363:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:voltage%3D230) |
+| [socket:bs1363:current](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:current) | [pfloat](../SpecialInputElements.md#pfloat) | [13](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:current%3D13) |
| [socket:bs1363:output](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3kW](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:output%3D3kW) |
| [socket:nema5_15](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:nema5_15:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [120 V](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:voltage%3D120 V) |
-| [socket:nema5_15:current](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:current) | [pfloat](../SpecialInputElements.md#pfloat) | [15 A](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:current%3D15 A) |
+| [socket:nema5_15:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [120](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:voltage%3D120) |
+| [socket:nema5_15:current](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:current) | [pfloat](../SpecialInputElements.md#pfloat) | [15](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:current%3D15) |
| [socket:nema5_15:output](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:output) | [pfloat](../SpecialInputElements.md#pfloat) | [1.8 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:output%3D1.8 kW) |
| [socket:sev1011_t23](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:sev1011_t23:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:voltage%3D230 V) |
-| [socket:sev1011_t23:current](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:current%3D16 A) |
+| [socket:sev1011_t23:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:voltage%3D230) |
+| [socket:sev1011_t23:current](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:current%3D16) |
| [socket:sev1011_t23:output](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3.7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:output%3D3.7 kW) |
| [socket:as3112](https://wiki.openstreetmap.org/wiki/Key:socket:as3112) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:as3112:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:voltage%3D230 V) |
-| [socket:as3112:current](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:current) | [pfloat](../SpecialInputElements.md#pfloat) | [10 A](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:current%3D10 A) |
+| [socket:as3112:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:voltage%3D230) |
+| [socket:as3112:current](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:current) | [pfloat](../SpecialInputElements.md#pfloat) | [10](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:current%3D10) |
| [socket:as3112:output](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:output) | [pfloat](../SpecialInputElements.md#pfloat) | [2.3 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:output%3D2.3 kW) |
| [socket:nema_5_20](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:nema_5_20:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [120 V](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:voltage%3D120 V) |
-| [socket:nema_5_20:current](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:current) | [pfloat](../SpecialInputElements.md#pfloat) | [20 A](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:current%3D20 A) |
+| [socket:nema_5_20:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [120](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:voltage%3D120) |
+| [socket:nema_5_20:current](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:current) | [pfloat](../SpecialInputElements.md#pfloat) | [20](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:current%3D20) |
| [socket:nema_5_20:output](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:output) | [pfloat](../SpecialInputElements.md#pfloat) | [2.4 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:output%3D2.4 kW) |
| [opening_hours](https://wiki.openstreetmap.org/wiki/Key:opening_hours) | [opening_hours](../SpecialInputElements.md#opening_hours) | [24/7](https://wiki.openstreetmap.org/wiki/Tag:opening_hours%3D24/7) |
| [fee](https://wiki.openstreetmap.org/wiki/Key:fee) | Multiple choice | [no](https://wiki.openstreetmap.org/wiki/Tag:fee%3Dno) [no](https://wiki.openstreetmap.org/wiki/Tag:fee%3Dno) [yes](https://wiki.openstreetmap.org/wiki/Tag:fee%3Dyes) [yes](https://wiki.openstreetmap.org/wiki/Tag:fee%3Dyes) |
@@ -334,13 +334,15 @@ The question is `How much plugs of type Schuko wall plug without ground p
*There are {socket:schuko} plugs of type Schuko wall plug without ground pin (CEE7/4 type F) available here* is shown if `socket:schuko` is set
This tagrendering is only visible in the popup if the following condition is met: socket:schuko~.+ & socket:schuko!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:schuko
The question is `What voltage do the plugs with Schuko wall plug without ground pin (CEE7/4 type F) offer?`
*Schuko wall plug without ground pin (CEE7/4 type F) outputs {canonical(socket:schuko:voltage)}* is shown if `socket:schuko:voltage` is set
- - *Schuko wall plug without ground pin (CEE7/4 type F) outputs 230 volt* is shown if with socket:schuko:voltage=230 V
+ - *Schuko wall plug without ground pin (CEE7/4 type F) outputs 230 volt* is shown if with socket:schuko:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:schuko~.+ & socket:schuko!=0
This tagrendering has labels
@@ -351,7 +353,7 @@ This tagrendering has labels
The question is `What current do the plugs with Schuko wall plug without ground pin (CEE7/4 type F) offer?`
*Schuko wall plug without ground pin (CEE7/4 type F) outputs at most {canonical(socket:schuko:current)}* is shown if `socket:schuko:current` is set
- - *Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 16 A* is shown if with socket:schuko:current=16 A
+ - *Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 16 A* is shown if with socket:schuko:current=16
This tagrendering is only visible in the popup if the following condition is met: socket:schuko~.+ & socket:schuko!=0
This tagrendering has labels
@@ -362,7 +364,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type Schuko wall plug without ground pin (CEE7/4 type F) offer?`
*Schuko wall plug without ground pin (CEE7/4 type F) outputs at most {canonical(socket:schuko:output)}* is shown if `socket:schuko:output` is set
- - *Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 3.6 kW A* is shown if with socket:schuko:output=3.6 kW
+ - *Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 3.6 kW* is shown if with socket:schuko:output=3.6 kW
This tagrendering is only visible in the popup if the following condition is met: socket:schuko~.+ & socket:schuko!=0
This tagrendering has labels
@@ -374,13 +376,15 @@ The question is `How much plugs of type European wall plug with ground pi
*There are {socket:typee} plugs of type European wall plug with ground pin (CEE7/4 type E) available here* is shown if `socket:typee` is set
This tagrendering is only visible in the popup if the following condition is met: socket:typee~.+ & socket:typee!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:typee
The question is `What voltage do the plugs with European wall plug with ground pin (CEE7/4 type E) offer?`
*European wall plug with ground pin (CEE7/4 type E) outputs {canonical(socket:typee:voltage)}* is shown if `socket:typee:voltage` is set
- - *European wall plug with ground pin (CEE7/4 type E) outputs 230 volt* is shown if with socket:typee:voltage=230 V
+ - *European wall plug with ground pin (CEE7/4 type E) outputs 230 volt* is shown if with socket:typee:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:typee~.+ & socket:typee!=0
This tagrendering has labels
@@ -391,7 +395,7 @@ This tagrendering has labels
The question is `What current do the plugs with European wall plug with ground pin (CEE7/4 type E) offer?`
*European wall plug with ground pin (CEE7/4 type E) outputs at most {canonical(socket:typee:current)}* is shown if `socket:typee:current` is set
- - *European wall plug with ground pin (CEE7/4 type E) outputs at most 16 A* is shown if with socket:typee:current=16 A
+ - *European wall plug with ground pin (CEE7/4 type E) outputs at most 16 A* is shown if with socket:typee:current=16
This tagrendering is only visible in the popup if the following condition is met: socket:typee~.+ & socket:typee!=0
This tagrendering has labels
@@ -402,8 +406,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type European wall plug with ground pin (CEE7/4 type E) offer?`
*European wall plug with ground pin (CEE7/4 type E) outputs at most {canonical(socket:typee:output)}* is shown if `socket:typee:output` is set
- - *European wall plug with ground pin (CEE7/4 type E) outputs at most 3 kW A* is shown if with socket:typee:output=3 kW
- - *European wall plug with ground pin (CEE7/4 type E) outputs at most 22 kW A* is shown if with socket:typee:output=22 kW
+ - *European wall plug with ground pin (CEE7/4 type E) outputs at most 3 kW* is shown if with socket:typee:output=3 kW
+ - *European wall plug with ground pin (CEE7/4 type E) outputs at most 22 kW* is shown if with socket:typee:output=22 kW
This tagrendering is only visible in the popup if the following condition is met: socket:typee~.+ & socket:typee!=0
This tagrendering has labels
@@ -415,13 +419,15 @@ The question is `How much plugs of type Chademo are available here?`
*There are {socket:chademo} plugs of type Chademo available here* is shown if `socket:chademo` is set
This tagrendering is only visible in the popup if the following condition is met: socket:chademo~.+ & socket:chademo!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:chademo
The question is `What voltage do the plugs with Chademo offer?`
*Chademo outputs {canonical(socket:chademo:voltage)}* is shown if `socket:chademo:voltage` is set
- - *Chademo outputs 500 volt* is shown if with socket:chademo:voltage=500 V
+ - *Chademo outputs 500 volt* is shown if with socket:chademo:voltage=500
This tagrendering is only visible in the popup if the following condition is met: socket:chademo~.+ & socket:chademo!=0
This tagrendering has labels
@@ -432,7 +438,7 @@ This tagrendering has labels
The question is `What current do the plugs with Chademo offer?`
*Chademo outputs at most {canonical(socket:chademo:current)}* is shown if `socket:chademo:current` is set
- - *Chademo outputs at most 120 A* is shown if with socket:chademo:current=120 A
+ - *Chademo outputs at most 120 A* is shown if with socket:chademo:current=120
This tagrendering is only visible in the popup if the following condition is met: socket:chademo~.+ & socket:chademo!=0
This tagrendering has labels
@@ -443,7 +449,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type Chademo offer?`
*Chademo outputs at most {canonical(socket:chademo:output)}* is shown if `socket:chademo:output` is set
- - *Chademo outputs at most 50 kW A* is shown if with socket:chademo:output=50 kW
+ - *Chademo outputs at most 50 kW* is shown if with socket:chademo:output=50 kW
This tagrendering is only visible in the popup if the following condition is met: socket:chademo~.+ & socket:chademo!=0
This tagrendering has labels
@@ -455,14 +461,16 @@ The question is `How much plugs of type Type 1 with cable (J1772) are ava
*There are {socket:type1_cable} plugs of type Type 1 with cable (J1772) available here* is shown if `socket:type1_cable` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type1_cable~.+ & socket:type1_cable!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type1_cable
The question is `What voltage do the plugs with Type 1 with cable (J1772) offer?`
*Type 1 with cable (J1772) outputs {canonical(socket:type1_cable:voltage)}* is shown if `socket:type1_cable:voltage` is set
- - *Type 1 with cable (J1772) outputs 200 volt* is shown if with socket:type1_cable:voltage=200 V
- - *Type 1 with cable (J1772) outputs 240 volt* is shown if with socket:type1_cable:voltage=240 V
+ - *Type 1 with cable (J1772) outputs 200 volt* is shown if with socket:type1_cable:voltage=200
+ - *Type 1 with cable (J1772) outputs 240 volt* is shown if with socket:type1_cable:voltage=240
This tagrendering is only visible in the popup if the following condition is met: socket:type1_cable~.+ & socket:type1_cable!=0
This tagrendering has labels
@@ -473,7 +481,7 @@ This tagrendering has labels
The question is `What current do the plugs with Type 1 with cable (J1772) offer?`
*Type 1 with cable (J1772) outputs at most {canonical(socket:type1_cable:current)}* is shown if `socket:type1_cable:current` is set
- - *Type 1 with cable (J1772) outputs at most 32 A* is shown if with socket:type1_cable:current=32 A
+ - *Type 1 with cable (J1772) outputs at most 32 A* is shown if with socket:type1_cable:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:type1_cable~.+ & socket:type1_cable!=0
This tagrendering has labels
@@ -484,8 +492,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 1 with cable (J1772) offer?`
*Type 1 with cable (J1772) outputs at most {canonical(socket:type1_cable:output)}* is shown if `socket:type1_cable:output` is set
- - *Type 1 with cable (J1772) outputs at most 3.7 kW A* is shown if with socket:type1_cable:output=3.7 kW
- - *Type 1 with cable (J1772) outputs at most 7 kW A* is shown if with socket:type1_cable:output=7 kW
+ - *Type 1 with cable (J1772) outputs at most 3.7 kW* is shown if with socket:type1_cable:output=3.7 kW
+ - *Type 1 with cable (J1772) outputs at most 7 kW* is shown if with socket:type1_cable:output=7 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type1_cable~.+ & socket:type1_cable!=0
This tagrendering has labels
@@ -497,14 +505,16 @@ The question is `How much plugs of type Type 1 without cable (J177
*There are {socket:type1} plugs of type Type 1 without cable (J1772) available here* is shown if `socket:type1` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type1~.+ & socket:type1!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type1
The question is `What voltage do the plugs with Type 1 without cable (J1772) offer?`
*Type 1 without cable (J1772) outputs {canonical(socket:type1:voltage)}* is shown if `socket:type1:voltage` is set
- - *Type 1 without cable (J1772) outputs 200 volt* is shown if with socket:type1:voltage=200 V
- - *Type 1 without cable (J1772) outputs 240 volt* is shown if with socket:type1:voltage=240 V
+ - *Type 1 without cable (J1772) outputs 200 volt* is shown if with socket:type1:voltage=200
+ - *Type 1 without cable (J1772) outputs 240 volt* is shown if with socket:type1:voltage=240
This tagrendering is only visible in the popup if the following condition is met: socket:type1~.+ & socket:type1!=0
This tagrendering has labels
@@ -515,7 +525,7 @@ This tagrendering has labels
The question is `What current do the plugs with Type 1 without cable (J1772) offer?`
*Type 1 without cable (J1772) outputs at most {canonical(socket:type1:current)}* is shown if `socket:type1:current` is set
- - *Type 1 without cable (J1772) outputs at most 32 A* is shown if with socket:type1:current=32 A
+ - *Type 1 without cable (J1772) outputs at most 32 A* is shown if with socket:type1:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:type1~.+ & socket:type1!=0
This tagrendering has labels
@@ -526,10 +536,10 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 1 without cable (J1772) offer?`
*Type 1 without cable (J1772) outputs at most {canonical(socket:type1:output)}* is shown if `socket:type1:output` is set
- - *Type 1 without cable (J1772) outputs at most 3.7 kW A* is shown if with socket:type1:output=3.7 kW
- - *Type 1 without cable (J1772) outputs at most 6.6 kW A* is shown if with socket:type1:output=6.6 kW
- - *Type 1 without cable (J1772) outputs at most 7 kW A* is shown if with socket:type1:output=7 kW
- - *Type 1 without cable (J1772) outputs at most 7.2 kW A* is shown if with socket:type1:output=7.2 kW
+ - *Type 1 without cable (J1772) outputs at most 3.7 kW* is shown if with socket:type1:output=3.7 kW
+ - *Type 1 without cable (J1772) outputs at most 6.6 kW* is shown if with socket:type1:output=6.6 kW
+ - *Type 1 without cable (J1772) outputs at most 7 kW* is shown if with socket:type1:output=7 kW
+ - *Type 1 without cable (J1772) outputs at most 7.2 kW* is shown if with socket:type1:output=7.2 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type1~.+ & socket:type1!=0
This tagrendering has labels
@@ -541,14 +551,16 @@ The question is `How much plugs of type Type 1 CCS (aka Type 1 Combo) are
*There are {socket:type1_combo} plugs of type Type 1 CCS (aka Type 1 Combo) available here* is shown if `socket:type1_combo` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type1_combo~.+ & socket:type1_combo!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type1_combo
The question is `What voltage do the plugs with Type 1 CCS (aka Type 1 Combo) offer?`
*Type 1 CCS (aka Type 1 Combo) outputs {canonical(socket:type1_combo:voltage)}* is shown if `socket:type1_combo:voltage` is set
- - *Type 1 CCS (aka Type 1 Combo) outputs 400 volt* is shown if with socket:type1_combo:voltage=400 V
- - *Type 1 CCS (aka Type 1 Combo) outputs 1000 volt* is shown if with socket:type1_combo:voltage=1000 V
+ - *Type 1 CCS (aka Type 1 Combo) outputs 400 volt* is shown if with socket:type1_combo:voltage=400
+ - *Type 1 CCS (aka Type 1 Combo) outputs 1000 volt* is shown if with socket:type1_combo:voltage=1000
This tagrendering is only visible in the popup if the following condition is met: socket:type1_combo~.+ & socket:type1_combo!=0
This tagrendering has labels
@@ -559,8 +571,8 @@ This tagrendering has labels
The question is `What current do the plugs with Type 1 CCS (aka Type 1 Combo) offer?`
*Type 1 CCS (aka Type 1 Combo) outputs at most {canonical(socket:type1_combo:current)}* is shown if `socket:type1_combo:current` is set
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 50 A* is shown if with socket:type1_combo:current=50 A
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 125 A* is shown if with socket:type1_combo:current=125 A
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 50 A* is shown if with socket:type1_combo:current=50
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 125 A* is shown if with socket:type1_combo:current=125
This tagrendering is only visible in the popup if the following condition is met: socket:type1_combo~.+ & socket:type1_combo!=0
This tagrendering has labels
@@ -571,10 +583,10 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 1 CCS (aka Type 1 Combo) offer?`
*Type 1 CCS (aka Type 1 Combo) outputs at most {canonical(socket:type1_combo:output)}* is shown if `socket:type1_combo:output` is set
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 50 kW A* is shown if with socket:type1_combo:output=50 kW
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 62.5 kW A* is shown if with socket:type1_combo:output=62.5 kW
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 150 kW A* is shown if with socket:type1_combo:output=150 kW
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 350 kW A* is shown if with socket:type1_combo:output=350 kW
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 50 kW* is shown if with socket:type1_combo:output=50 kW
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 62.5 kW* is shown if with socket:type1_combo:output=62.5 kW
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 150 kW* is shown if with socket:type1_combo:output=150 kW
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 350 kW* is shown if with socket:type1_combo:output=350 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type1_combo~.+ & socket:type1_combo!=0
This tagrendering has labels
@@ -586,13 +598,15 @@ The question is `How much plugs of type Tesla Supercharger are available
*There are {socket:tesla_supercharger} plugs of type Tesla Supercharger available here* is shown if `socket:tesla_supercharger` is set
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:tesla_supercharger
The question is `What voltage do the plugs with Tesla Supercharger offer?`
*Tesla Supercharger outputs {canonical(socket:tesla_supercharger:voltage)}* is shown if `socket:tesla_supercharger:voltage` is set
- - *Tesla Supercharger outputs 480 volt* is shown if with socket:tesla_supercharger:voltage=480 V
+ - *Tesla Supercharger outputs 480 volt* is shown if with socket:tesla_supercharger:voltage=480
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0
This tagrendering has labels
@@ -603,8 +617,8 @@ This tagrendering has labels
The question is `What current do the plugs with Tesla Supercharger offer?`
*Tesla Supercharger outputs at most {canonical(socket:tesla_supercharger:current)}* is shown if `socket:tesla_supercharger:current` is set
- - *Tesla Supercharger outputs at most 125 A* is shown if with socket:tesla_supercharger:current=125 A
- - *Tesla Supercharger outputs at most 350 A* is shown if with socket:tesla_supercharger:current=350 A
+ - *Tesla Supercharger outputs at most 125 A* is shown if with socket:tesla_supercharger:current=125
+ - *Tesla Supercharger outputs at most 350 A* is shown if with socket:tesla_supercharger:current=350
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0
This tagrendering has labels
@@ -615,9 +629,9 @@ This tagrendering has labels
The question is `What power output does a single plug of type Tesla Supercharger offer?`
*Tesla Supercharger outputs at most {canonical(socket:tesla_supercharger:output)}* is shown if `socket:tesla_supercharger:output` is set
- - *Tesla Supercharger outputs at most 120 kW A* is shown if with socket:tesla_supercharger:output=120 kW
- - *Tesla Supercharger outputs at most 150 kW A* is shown if with socket:tesla_supercharger:output=150 kW
- - *Tesla Supercharger outputs at most 250 kW A* is shown if with socket:tesla_supercharger:output=250 kW
+ - *Tesla Supercharger outputs at most 120 kW* is shown if with socket:tesla_supercharger:output=120 kW
+ - *Tesla Supercharger outputs at most 150 kW* is shown if with socket:tesla_supercharger:output=150 kW
+ - *Tesla Supercharger outputs at most 250 kW* is shown if with socket:tesla_supercharger:output=250 kW
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0
This tagrendering has labels
@@ -629,14 +643,16 @@ The question is `How much plugs of type Type 2 (mennekes) are available h
*There are {socket:type2} plugs of type Type 2 (mennekes) available here* is shown if `socket:type2` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type2~.+ & socket:type2!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type2
The question is `What voltage do the plugs with Type 2 (mennekes) offer?`
*Type 2 (mennekes) outputs {canonical(socket:type2:voltage)}* is shown if `socket:type2:voltage` is set
- - *Type 2 (mennekes) outputs 230 volt* is shown if with socket:type2:voltage=230 V
- - *Type 2 (mennekes) outputs 400 volt* is shown if with socket:type2:voltage=400 V
+ - *Type 2 (mennekes) outputs 230 volt* is shown if with socket:type2:voltage=230
+ - *Type 2 (mennekes) outputs 400 volt* is shown if with socket:type2:voltage=400
This tagrendering is only visible in the popup if the following condition is met: socket:type2~.+ & socket:type2!=0
This tagrendering has labels
@@ -647,8 +663,8 @@ This tagrendering has labels
The question is `What current do the plugs with Type 2 (mennekes) offer?`
*Type 2 (mennekes) outputs at most {canonical(socket:type2:current)}* is shown if `socket:type2:current` is set
- - *Type 2 (mennekes) outputs at most 16 A* is shown if with socket:type2:current=16 A
- - *Type 2 (mennekes) outputs at most 32 A* is shown if with socket:type2:current=32 A
+ - *Type 2 (mennekes) outputs at most 16 A* is shown if with socket:type2:current=16
+ - *Type 2 (mennekes) outputs at most 32 A* is shown if with socket:type2:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:type2~.+ & socket:type2!=0
This tagrendering has labels
@@ -659,8 +675,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 2 (mennekes) offer?`
*Type 2 (mennekes) outputs at most {canonical(socket:type2:output)}* is shown if `socket:type2:output` is set
- - *Type 2 (mennekes) outputs at most 11 kW A* is shown if with socket:type2:output=11 kW
- - *Type 2 (mennekes) outputs at most 22 kW A* is shown if with socket:type2:output=22 kW
+ - *Type 2 (mennekes) outputs at most 11 kW* is shown if with socket:type2:output=11 kW
+ - *Type 2 (mennekes) outputs at most 22 kW* is shown if with socket:type2:output=22 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type2~.+ & socket:type2!=0
This tagrendering has labels
@@ -672,14 +688,16 @@ The question is `How much plugs of type Type 2 CCS (mennekes) are availab
*There are {socket:type2_combo} plugs of type Type 2 CCS (mennekes) available here* is shown if `socket:type2_combo` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type2_combo~.+ & socket:type2_combo!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type2_combo
The question is `What voltage do the plugs with Type 2 CCS (mennekes) offer?`
*Type 2 CCS (mennekes) outputs {canonical(socket:type2_combo:voltage)}* is shown if `socket:type2_combo:voltage` is set
- - *Type 2 CCS (mennekes) outputs 500 volt* is shown if with socket:type2_combo:voltage=500 V
- - *Type 2 CCS (mennekes) outputs 920 volt* is shown if with socket:type2_combo:voltage=920 V
+ - *Type 2 CCS (mennekes) outputs 500 volt* is shown if with socket:type2_combo:voltage=500
+ - *Type 2 CCS (mennekes) outputs 920 volt* is shown if with socket:type2_combo:voltage=920
This tagrendering is only visible in the popup if the following condition is met: socket:type2_combo~.+ & socket:type2_combo!=0
This tagrendering has labels
@@ -690,8 +708,8 @@ This tagrendering has labels
The question is `What current do the plugs with Type 2 CCS (mennekes) offer?`
*Type 2 CCS (mennekes) outputs at most {canonical(socket:type2_combo:current)}* is shown if `socket:type2_combo:current` is set
- - *Type 2 CCS (mennekes) outputs at most 125 A* is shown if with socket:type2_combo:current=125 A
- - *Type 2 CCS (mennekes) outputs at most 350 A* is shown if with socket:type2_combo:current=350 A
+ - *Type 2 CCS (mennekes) outputs at most 125 A* is shown if with socket:type2_combo:current=125
+ - *Type 2 CCS (mennekes) outputs at most 350 A* is shown if with socket:type2_combo:current=350
This tagrendering is only visible in the popup if the following condition is met: socket:type2_combo~.+ & socket:type2_combo!=0
This tagrendering has labels
@@ -702,7 +720,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 2 CCS (mennekes) offer?`
*Type 2 CCS (mennekes) outputs at most {canonical(socket:type2_combo:output)}* is shown if `socket:type2_combo:output` is set
- - *Type 2 CCS (mennekes) outputs at most 50 kW A* is shown if with socket:type2_combo:output=50 kW
+ - *Type 2 CCS (mennekes) outputs at most 50 kW* is shown if with socket:type2_combo:output=50 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type2_combo~.+ & socket:type2_combo!=0
This tagrendering has labels
@@ -714,14 +732,16 @@ The question is `How much plugs of type Type 2 with cable (mennekes) are
*There are {socket:type2_cable} plugs of type Type 2 with cable (mennekes) available here* is shown if `socket:type2_cable` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type2_cable~.+ & socket:type2_cable!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type2_cable
The question is `What voltage do the plugs with Type 2 with cable (mennekes) offer?`
*Type 2 with cable (mennekes) outputs {canonical(socket:type2_cable:voltage)}* is shown if `socket:type2_cable:voltage` is set
- - *Type 2 with cable (mennekes) outputs 230 volt* is shown if with socket:type2_cable:voltage=230 V
- - *Type 2 with cable (mennekes) outputs 400 volt* is shown if with socket:type2_cable:voltage=400 V
+ - *Type 2 with cable (mennekes) outputs 230 volt* is shown if with socket:type2_cable:voltage=230
+ - *Type 2 with cable (mennekes) outputs 400 volt* is shown if with socket:type2_cable:voltage=400
This tagrendering is only visible in the popup if the following condition is met: socket:type2_cable~.+ & socket:type2_cable!=0
This tagrendering has labels
@@ -732,8 +752,8 @@ This tagrendering has labels
The question is `What current do the plugs with Type 2 with cable (mennekes) offer?`
*Type 2 with cable (mennekes) outputs at most {canonical(socket:type2_cable:current)}* is shown if `socket:type2_cable:current` is set
- - *Type 2 with cable (mennekes) outputs at most 16 A* is shown if with socket:type2_cable:current=16 A
- - *Type 2 with cable (mennekes) outputs at most 32 A* is shown if with socket:type2_cable:current=32 A
+ - *Type 2 with cable (mennekes) outputs at most 16 A* is shown if with socket:type2_cable:current=16
+ - *Type 2 with cable (mennekes) outputs at most 32 A* is shown if with socket:type2_cable:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:type2_cable~.+ & socket:type2_cable!=0
This tagrendering has labels
@@ -744,8 +764,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 2 with cable (mennekes) offer?`
*Type 2 with cable (mennekes) outputs at most {canonical(socket:type2_cable:output)}* is shown if `socket:type2_cable:output` is set
- - *Type 2 with cable (mennekes) outputs at most 11 kW A* is shown if with socket:type2_cable:output=11 kW
- - *Type 2 with cable (mennekes) outputs at most 22 kW A* is shown if with socket:type2_cable:output=22 kW
+ - *Type 2 with cable (mennekes) outputs at most 11 kW* is shown if with socket:type2_cable:output=11 kW
+ - *Type 2 with cable (mennekes) outputs at most 22 kW* is shown if with socket:type2_cable:output=22 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type2_cable~.+ & socket:type2_cable!=0
This tagrendering has labels
@@ -757,14 +777,16 @@ The question is `How much plugs of type Tesla Supercharger CCS (a branded
*There are {socket:tesla_supercharger_ccs} plugs of type Tesla Supercharger CCS (a branded type2_css) available here* is shown if `socket:tesla_supercharger_ccs` is set
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:tesla_supercharger_ccs
The question is `What voltage do the plugs with Tesla Supercharger CCS (a branded type2_css) offer?`
*Tesla Supercharger CCS (a branded type2_css) outputs {canonical(socket:tesla_supercharger_ccs:voltage)}* is shown if `socket:tesla_supercharger_ccs:voltage` is set
- - *Tesla Supercharger CCS (a branded type2_css) outputs 500 volt* is shown if with socket:tesla_supercharger_ccs:voltage=500 V
- - *Tesla Supercharger CCS (a branded type2_css) outputs 920 volt* is shown if with socket:tesla_supercharger_ccs:voltage=920 V
+ - *Tesla Supercharger CCS (a branded type2_css) outputs 500 volt* is shown if with socket:tesla_supercharger_ccs:voltage=500
+ - *Tesla Supercharger CCS (a branded type2_css) outputs 920 volt* is shown if with socket:tesla_supercharger_ccs:voltage=920
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0
This tagrendering has labels
@@ -775,8 +797,8 @@ This tagrendering has labels
The question is `What current do the plugs with Tesla Supercharger CCS (a branded type2_css) offer?`
*Tesla Supercharger CCS (a branded type2_css) outputs at most {canonical(socket:tesla_supercharger_ccs:current)}* is shown if `socket:tesla_supercharger_ccs:current` is set
- - *Tesla Supercharger CCS (a branded type2_css) outputs at most 125 A* is shown if with socket:tesla_supercharger_ccs:current=125 A
- - *Tesla Supercharger CCS (a branded type2_css) outputs at most 350 A* is shown if with socket:tesla_supercharger_ccs:current=350 A
+ - *Tesla Supercharger CCS (a branded type2_css) outputs at most 125 A* is shown if with socket:tesla_supercharger_ccs:current=125
+ - *Tesla Supercharger CCS (a branded type2_css) outputs at most 350 A* is shown if with socket:tesla_supercharger_ccs:current=350
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0
This tagrendering has labels
@@ -787,7 +809,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type Tesla Supercharger CCS (a branded type2_css) offer?`
*Tesla Supercharger CCS (a branded type2_css) outputs at most {canonical(socket:tesla_supercharger_ccs:output)}* is shown if `socket:tesla_supercharger_ccs:output` is set
- - *Tesla Supercharger CCS (a branded type2_css) outputs at most 50 kW A* is shown if with socket:tesla_supercharger_ccs:output=50 kW
+ - *Tesla Supercharger CCS (a branded type2_css) outputs at most 50 kW* is shown if with socket:tesla_supercharger_ccs:output=50 kW
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0
This tagrendering has labels
@@ -799,13 +821,15 @@ The question is `How much plugs of type Tesla Supercharger (destination)
*There are {socket:tesla_destination} plugs of type Tesla Supercharger (destination) available here* is shown if `socket:tesla_destination` is set
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:tesla_destination_us
The question is `What voltage do the plugs with Tesla Supercharger (destination) offer?`
*Tesla Supercharger (destination) outputs {canonical(socket:tesla_destination:voltage)}* is shown if `socket:tesla_destination:voltage` is set
- - *Tesla Supercharger (destination) outputs 480 volt* is shown if with socket:tesla_destination:voltage=480 V
+ - *Tesla Supercharger (destination) outputs 480 volt* is shown if with socket:tesla_destination:voltage=480
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -816,8 +840,8 @@ This tagrendering has labels
The question is `What current do the plugs with Tesla Supercharger (destination) offer?`
*Tesla Supercharger (destination) outputs at most {canonical(socket:tesla_destination:current)}* is shown if `socket:tesla_destination:current` is set
- - *Tesla Supercharger (destination) outputs at most 125 A* is shown if with socket:tesla_destination:current=125 A
- - *Tesla Supercharger (destination) outputs at most 350 A* is shown if with socket:tesla_destination:current=350 A
+ - *Tesla Supercharger (destination) outputs at most 125 A* is shown if with socket:tesla_destination:current=125
+ - *Tesla Supercharger (destination) outputs at most 350 A* is shown if with socket:tesla_destination:current=350
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -828,9 +852,9 @@ This tagrendering has labels
The question is `What power output does a single plug of type Tesla Supercharger (destination) offer?`
*Tesla Supercharger (destination) outputs at most {canonical(socket:tesla_destination:output)}* is shown if `socket:tesla_destination:output` is set
- - *Tesla Supercharger (destination) outputs at most 120 kW A* is shown if with socket:tesla_destination:output=120 kW
- - *Tesla Supercharger (destination) outputs at most 150 kW A* is shown if with socket:tesla_destination:output=150 kW
- - *Tesla Supercharger (destination) outputs at most 250 kW A* is shown if with socket:tesla_destination:output=250 kW
+ - *Tesla Supercharger (destination) outputs at most 120 kW* is shown if with socket:tesla_destination:output=120 kW
+ - *Tesla Supercharger (destination) outputs at most 150 kW* is shown if with socket:tesla_destination:output=150 kW
+ - *Tesla Supercharger (destination) outputs at most 250 kW* is shown if with socket:tesla_destination:output=250 kW
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -842,14 +866,16 @@ The question is `How much plugs of type Tesla supercharger (destination)
*There are {socket:tesla_destination} plugs of type Tesla supercharger (destination) (A Type 2 with cable branded as tesla) available here* is shown if `socket:tesla_destination` is set
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:tesla_destination
The question is `What voltage do the plugs with Tesla supercharger (destination) (A Type 2 with cable branded as tesla) offer?`
*Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs {canonical(socket:tesla_destination:voltage)}* is shown if `socket:tesla_destination:voltage` is set
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 230 volt* is shown if with socket:tesla_destination:voltage=230 V
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 400 volt* is shown if with socket:tesla_destination:voltage=400 V
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 230 volt* is shown if with socket:tesla_destination:voltage=230
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 400 volt* is shown if with socket:tesla_destination:voltage=400
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -860,8 +886,8 @@ This tagrendering has labels
The question is `What current do the plugs with Tesla supercharger (destination) (A Type 2 with cable branded as tesla) offer?`
*Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most {canonical(socket:tesla_destination:current)}* is shown if `socket:tesla_destination:current` is set
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 16 A* is shown if with socket:tesla_destination:current=16 A
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 32 A* is shown if with socket:tesla_destination:current=32 A
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 16 A* is shown if with socket:tesla_destination:current=16
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 32 A* is shown if with socket:tesla_destination:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -872,8 +898,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type Tesla supercharger (destination) (A Type 2 with cable branded as tesla) offer?`
*Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most {canonical(socket:tesla_destination:output)}* is shown if `socket:tesla_destination:output` is set
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 11 kW A* is shown if with socket:tesla_destination:output=11 kW
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 22 kW A* is shown if with socket:tesla_destination:output=22 kW
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 11 kW* is shown if with socket:tesla_destination:output=11 kW
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 22 kW* is shown if with socket:tesla_destination:output=22 kW
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -885,13 +911,15 @@ The question is `How much plugs of type USB to charge phones and small el
*There are {socket:USB-A} plugs of type USB to charge phones and small electronics available here* is shown if `socket:USB-A` is set
This tagrendering is only visible in the popup if the following condition is met: socket:USB-A~.+ & socket:USB-A!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:USB-A
The question is `What voltage do the plugs with USB to charge phones and small electronics offer?`
*USB to charge phones and small electronics outputs {canonical(socket:USB-A:voltage)}* is shown if `socket:USB-A:voltage` is set
- - *USB to charge phones and small electronics outputs 5 volt* is shown if with socket:USB-A:voltage=5 V
+ - *USB to charge phones and small electronics outputs 5 volt* is shown if with socket:USB-A:voltage=5
This tagrendering is only visible in the popup if the following condition is met: socket:USB-A~.+ & socket:USB-A!=0
This tagrendering has labels
@@ -902,8 +930,8 @@ This tagrendering has labels
The question is `What current do the plugs with USB to charge phones and small electronics offer?`
*USB to charge phones and small electronics outputs at most {canonical(socket:USB-A:current)}* is shown if `socket:USB-A:current` is set
- - *USB to charge phones and small electronics outputs at most 1 A* is shown if with socket:USB-A:current=1 A
- - *USB to charge phones and small electronics outputs at most 2 A* is shown if with socket:USB-A:current=2 A
+ - *USB to charge phones and small electronics outputs at most 1 A* is shown if with socket:USB-A:current=1
+ - *USB to charge phones and small electronics outputs at most 2 A* is shown if with socket:USB-A:current=2
This tagrendering is only visible in the popup if the following condition is met: socket:USB-A~.+ & socket:USB-A!=0
This tagrendering has labels
@@ -914,8 +942,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type USB to charge phones and small electronics offer?`
*USB to charge phones and small electronics outputs at most {canonical(socket:USB-A:output)}* is shown if `socket:USB-A:output` is set
- - *USB to charge phones and small electronics outputs at most 5W A* is shown if with socket:USB-A:output=5W
- - *USB to charge phones and small electronics outputs at most 10W A* is shown if with socket:USB-A:output=10W
+ - *USB to charge phones and small electronics outputs at most 5W* is shown if with socket:USB-A:output=5W
+ - *USB to charge phones and small electronics outputs at most 10W* is shown if with socket:USB-A:output=10W
This tagrendering is only visible in the popup if the following condition is met: socket:USB-A~.+ & socket:USB-A!=0
This tagrendering has labels
@@ -927,6 +955,8 @@ The question is `How much plugs of type Bosch Active Connect with 3 pins
*There are {socket:bosch_3pin} plugs of type Bosch Active Connect with 3 pins and cable available here* is shown if `socket:bosch_3pin` is set
This tagrendering is only visible in the popup if the following condition is met: socket:bosch_3pin~.+ & socket:bosch_3pin!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:bosch_3pin
@@ -961,6 +991,8 @@ The question is `How much plugs of type Bosch Active Connect with 5 pins
*There are {socket:bosch_5pin} plugs of type Bosch Active Connect with 5 pins and cable available here* is shown if `socket:bosch_5pin` is set
This tagrendering is only visible in the popup if the following condition is met: socket:bosch_5pin~.+ & socket:bosch_5pin!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:bosch_5pin
@@ -995,13 +1027,15 @@ The question is `How much plugs of type BS1363 (Type G) are available her
*There are {socket:bs1363} plugs of type BS1363 (Type G) available here* is shown if `socket:bs1363` is set
This tagrendering is only visible in the popup if the following condition is met: socket:bs1363~.+ & socket:bs1363!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:bs1363
The question is `What voltage do the plugs with BS1363 (Type G) offer?`
*BS1363 (Type G) outputs {canonical(socket:bs1363:voltage)}* is shown if `socket:bs1363:voltage` is set
- - *BS1363 (Type G) outputs 230 volt* is shown if with socket:bs1363:voltage=230 V
+ - *BS1363 (Type G) outputs 230 volt* is shown if with socket:bs1363:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:bs1363~.+ & socket:bs1363!=0
This tagrendering has labels
@@ -1012,7 +1046,7 @@ This tagrendering has labels
The question is `What current do the plugs with BS1363 (Type G) offer?`
*BS1363 (Type G) outputs at most {canonical(socket:bs1363:current)}* is shown if `socket:bs1363:current` is set
- - *BS1363 (Type G) outputs at most 13 A* is shown if with socket:bs1363:current=13 A
+ - *BS1363 (Type G) outputs at most 13 A* is shown if with socket:bs1363:current=13
This tagrendering is only visible in the popup if the following condition is met: socket:bs1363~.+ & socket:bs1363!=0
This tagrendering has labels
@@ -1023,7 +1057,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type BS1363 (Type G) offer?`
*BS1363 (Type G) outputs at most {canonical(socket:bs1363:output)}* is shown if `socket:bs1363:output` is set
- - *BS1363 (Type G) outputs at most 3kW A* is shown if with socket:bs1363:output=3kW
+ - *BS1363 (Type G) outputs at most 3kW* is shown if with socket:bs1363:output=3kW
This tagrendering is only visible in the popup if the following condition is met: socket:bs1363~.+ & socket:bs1363!=0
This tagrendering has labels
@@ -1035,13 +1069,15 @@ The question is `How much plugs of type NEMA 5-15 (Type B) are available
*There are {socket:nema5_15} plugs of type NEMA 5-15 (Type B) available here* is shown if `socket:nema5_15` is set
This tagrendering is only visible in the popup if the following condition is met: socket:nema5_15~.+ & socket:nema5_15!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:nema5_15
The question is `What voltage do the plugs with NEMA 5-15 (Type B) offer?`
*NEMA 5-15 (Type B) outputs {canonical(socket:nema5_15:voltage)}* is shown if `socket:nema5_15:voltage` is set
- - *NEMA 5-15 (Type B) outputs 120 volt* is shown if with socket:nema5_15:voltage=120 V
+ - *NEMA 5-15 (Type B) outputs 120 volt* is shown if with socket:nema5_15:voltage=120
This tagrendering is only visible in the popup if the following condition is met: socket:nema5_15~.+ & socket:nema5_15!=0
This tagrendering has labels
@@ -1052,7 +1088,7 @@ This tagrendering has labels
The question is `What current do the plugs with NEMA 5-15 (Type B) offer?`
*NEMA 5-15 (Type B) outputs at most {canonical(socket:nema5_15:current)}* is shown if `socket:nema5_15:current` is set
- - *NEMA 5-15 (Type B) outputs at most 15 A* is shown if with socket:nema5_15:current=15 A
+ - *NEMA 5-15 (Type B) outputs at most 15 A* is shown if with socket:nema5_15:current=15
This tagrendering is only visible in the popup if the following condition is met: socket:nema5_15~.+ & socket:nema5_15!=0
This tagrendering has labels
@@ -1063,7 +1099,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type NEMA 5-15 (Type B) offer?`
*NEMA 5-15 (Type B) outputs at most {canonical(socket:nema5_15:output)}* is shown if `socket:nema5_15:output` is set
- - *NEMA 5-15 (Type B) outputs at most 1.8 kW A* is shown if with socket:nema5_15:output=1.8 kW
+ - *NEMA 5-15 (Type B) outputs at most 1.8 kW* is shown if with socket:nema5_15:output=1.8 kW
This tagrendering is only visible in the popup if the following condition is met: socket:nema5_15~.+ & socket:nema5_15!=0
This tagrendering has labels
@@ -1075,13 +1111,15 @@ The question is `How much plugs of type SEV 1011 T23 (Type J) are availab
*There are {socket:sev1011_t23} plugs of type SEV 1011 T23 (Type J) available here* is shown if `socket:sev1011_t23` is set
This tagrendering is only visible in the popup if the following condition is met: socket:sev1011_t23~.+ & socket:sev1011_t23!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:sev1011_t23
The question is `What voltage do the plugs with SEV 1011 T23 (Type J) offer?`
*SEV 1011 T23 (Type J) outputs {canonical(socket:sev1011_t23:voltage)}* is shown if `socket:sev1011_t23:voltage` is set
- - *SEV 1011 T23 (Type J) outputs 230 volt* is shown if with socket:sev1011_t23:voltage=230 V
+ - *SEV 1011 T23 (Type J) outputs 230 volt* is shown if with socket:sev1011_t23:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:sev1011_t23~.+ & socket:sev1011_t23!=0
This tagrendering has labels
@@ -1092,7 +1130,7 @@ This tagrendering has labels
The question is `What current do the plugs with SEV 1011 T23 (Type J) offer?`
*SEV 1011 T23 (Type J) outputs at most {canonical(socket:sev1011_t23:current)}* is shown if `socket:sev1011_t23:current` is set
- - *SEV 1011 T23 (Type J) outputs at most 16 A* is shown if with socket:sev1011_t23:current=16 A
+ - *SEV 1011 T23 (Type J) outputs at most 16 A* is shown if with socket:sev1011_t23:current=16
This tagrendering is only visible in the popup if the following condition is met: socket:sev1011_t23~.+ & socket:sev1011_t23!=0
This tagrendering has labels
@@ -1103,7 +1141,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type SEV 1011 T23 (Type J) offer?`
*SEV 1011 T23 (Type J) outputs at most {canonical(socket:sev1011_t23:output)}* is shown if `socket:sev1011_t23:output` is set
- - *SEV 1011 T23 (Type J) outputs at most 3.7 kW A* is shown if with socket:sev1011_t23:output=3.7 kW
+ - *SEV 1011 T23 (Type J) outputs at most 3.7 kW* is shown if with socket:sev1011_t23:output=3.7 kW
This tagrendering is only visible in the popup if the following condition is met: socket:sev1011_t23~.+ & socket:sev1011_t23!=0
This tagrendering has labels
@@ -1115,13 +1153,15 @@ The question is `How much plugs of type AS3112 (Type I) are available her
*There are {socket:as3112} plugs of type AS3112 (Type I) available here* is shown if `socket:as3112` is set
This tagrendering is only visible in the popup if the following condition is met: socket:as3112~.+ & socket:as3112!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:as3112
The question is `What voltage do the plugs with AS3112 (Type I) offer?`
*AS3112 (Type I) outputs {canonical(socket:as3112:voltage)}* is shown if `socket:as3112:voltage` is set
- - *AS3112 (Type I) outputs 230 volt* is shown if with socket:as3112:voltage=230 V
+ - *AS3112 (Type I) outputs 230 volt* is shown if with socket:as3112:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:as3112~.+ & socket:as3112!=0
This tagrendering has labels
@@ -1132,7 +1172,7 @@ This tagrendering has labels
The question is `What current do the plugs with AS3112 (Type I) offer?`
*AS3112 (Type I) outputs at most {canonical(socket:as3112:current)}* is shown if `socket:as3112:current` is set
- - *AS3112 (Type I) outputs at most 10 A* is shown if with socket:as3112:current=10 A
+ - *AS3112 (Type I) outputs at most 10 A* is shown if with socket:as3112:current=10
This tagrendering is only visible in the popup if the following condition is met: socket:as3112~.+ & socket:as3112!=0
This tagrendering has labels
@@ -1143,7 +1183,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type AS3112 (Type I) offer?`
*AS3112 (Type I) outputs at most {canonical(socket:as3112:output)}* is shown if `socket:as3112:output` is set
- - *AS3112 (Type I) outputs at most 2.3 kW A* is shown if with socket:as3112:output=2.3 kW
+ - *AS3112 (Type I) outputs at most 2.3 kW* is shown if with socket:as3112:output=2.3 kW
This tagrendering is only visible in the popup if the following condition is met: socket:as3112~.+ & socket:as3112!=0
This tagrendering has labels
@@ -1155,13 +1195,15 @@ The question is `How much plugs of type NEMA 5-20 (Type B) are available
*There are {socket:nema_5_20} plugs of type NEMA 5-20 (Type B) available here* is shown if `socket:nema_5_20` is set
This tagrendering is only visible in the popup if the following condition is met: socket:nema_5_20~.+ & socket:nema_5_20!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:nema_5_20
The question is `What voltage do the plugs with NEMA 5-20 (Type B) offer?`
*NEMA 5-20 (Type B) outputs {canonical(socket:nema_5_20:voltage)}* is shown if `socket:nema_5_20:voltage` is set
- - *NEMA 5-20 (Type B) outputs 120 volt* is shown if with socket:nema_5_20:voltage=120 V
+ - *NEMA 5-20 (Type B) outputs 120 volt* is shown if with socket:nema_5_20:voltage=120
This tagrendering is only visible in the popup if the following condition is met: socket:nema_5_20~.+ & socket:nema_5_20!=0
This tagrendering has labels
@@ -1172,7 +1214,7 @@ This tagrendering has labels
The question is `What current do the plugs with NEMA 5-20 (Type B) offer?`
*NEMA 5-20 (Type B) outputs at most {canonical(socket:nema_5_20:current)}* is shown if `socket:nema_5_20:current` is set
- - *NEMA 5-20 (Type B) outputs at most 20 A* is shown if with socket:nema_5_20:current=20 A
+ - *NEMA 5-20 (Type B) outputs at most 20 A* is shown if with socket:nema_5_20:current=20
This tagrendering is only visible in the popup if the following condition is met: socket:nema_5_20~.+ & socket:nema_5_20!=0
This tagrendering has labels
@@ -1183,7 +1225,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type NEMA 5-20 (Type B) offer?`
*NEMA 5-20 (Type B) outputs at most {canonical(socket:nema_5_20:output)}* is shown if `socket:nema_5_20:output` is set
- - *NEMA 5-20 (Type B) outputs at most 2.4 kW A* is shown if with socket:nema_5_20:output=2.4 kW
+ - *NEMA 5-20 (Type B) outputs at most 2.4 kW* is shown if with socket:nema_5_20:output=2.4 kW
This tagrendering is only visible in the popup if the following condition is met: socket:nema_5_20~.+ & socket:nema_5_20!=0
This tagrendering has labels
diff --git a/Docs/Layers/dogshop.md b/Docs/Layers/dogshop.md
index 5d8664910..675aa86b1 100644
--- a/Docs/Layers/dogshop.md
+++ b/Docs/Layers/dogshop.md
@@ -300,6 +300,7 @@ The question is `What kind of shop is this?`
- *Wig Shop* is shown if with shop=wigs
- *Window Blind Store* is shown if with shop=window_blind
- *Wine Shop* is shown if with shop=wine
+ - *This shop is no longer used. It is vacant* is shown if with disused:shop=
This tagrendering has labels
`description`
@@ -882,6 +883,7 @@ This tagrendering has labels
| shop_types.162 | Wig Shop | shop=wigs |
| shop_types.163 | Window Blind Store | shop=window_blind |
| shop_types.164 | Wine Shop | shop=wine |
+| shop_types.165 | This shop is no longer used. It is vacant | disused:shop= | (shop=disused | shop=vacant | disused:shop~^(.+)$ | abandoned:shop~^(.+)$) |
| id | question | osmTags |
-----|-----|----- |
diff --git a/Docs/Layers/drinking_water.md b/Docs/Layers/drinking_water.md
index 22fa15b8e..3455ef7c0 100644
--- a/Docs/Layers/drinking_water.md
+++ b/Docs/Layers/drinking_water.md
@@ -16,9 +16,10 @@ A layer showing drinking water fountains
4. [Supported attributes](#supported-attributes)
- [images](#images)
- [Still in use?](#still-in-use)
+ - [fee](#fee)
- [type](#type)
- [Bottle refill](#bottle-refill)
- - [fee](#fee)
+ - [temperature-cold](#temperature-cold)
- [seasonal](#seasonal)
- [opening_hours_24_7](#opening_hours_24_7)
- [Opening hours](#opening-hours)
@@ -69,8 +70,8 @@ Elements must match **all** of the following expressions:
| attribute | type | values which are supported by this layer |
-----|-----|----- |
| [operational_status](https://wiki.openstreetmap.org/wiki/Key:operational_status) | [string](../SpecialInputElements.md#string) | [](https://wiki.openstreetmap.org/wiki/Tag:operational_status%3D) [broken](https://wiki.openstreetmap.org/wiki/Tag:operational_status%3Dbroken) [closed](https://wiki.openstreetmap.org/wiki/Tag:operational_status%3Dclosed) |
-| [bottle](https://wiki.openstreetmap.org/wiki/Key:bottle) | Multiple choice | [yes](https://wiki.openstreetmap.org/wiki/Tag:bottle%3Dyes) [no](https://wiki.openstreetmap.org/wiki/Tag:bottle%3Dno) |
| [fee](https://wiki.openstreetmap.org/wiki/Key:fee) | Multiple choice | [no](https://wiki.openstreetmap.org/wiki/Tag:fee%3Dno) [yes](https://wiki.openstreetmap.org/wiki/Tag:fee%3Dyes) |
+| [bottle](https://wiki.openstreetmap.org/wiki/Key:bottle) | Multiple choice | [yes](https://wiki.openstreetmap.org/wiki/Tag:bottle%3Dyes) [no](https://wiki.openstreetmap.org/wiki/Tag:bottle%3Dno) |
| [seasonal](https://wiki.openstreetmap.org/wiki/Key:seasonal) | Multiple choice | [no](https://wiki.openstreetmap.org/wiki/Tag:seasonal%3Dno) [summer](https://wiki.openstreetmap.org/wiki/Tag:seasonal%3Dsummer) [spring;summer;autumn](https://wiki.openstreetmap.org/wiki/Tag:seasonal%3Dspring;summer;autumn) |
| [opening_hours](https://wiki.openstreetmap.org/wiki/Key:opening_hours) | [opening_hours](../SpecialInputElements.md#opening_hours) | [24/7](https://wiki.openstreetmap.org/wiki/Tag:opening_hours%3D24/7) |
| [artwork_type](https://wiki.openstreetmap.org/wiki/Key:artwork_type) | [string](../SpecialInputElements.md#string) | [architecture](https://wiki.openstreetmap.org/wiki/Tag:artwork_type%3Darchitecture) [mural](https://wiki.openstreetmap.org/wiki/Tag:artwork_type%3Dmural) [painting](https://wiki.openstreetmap.org/wiki/Tag:artwork_type%3Dpainting) [sculpture](https://wiki.openstreetmap.org/wiki/Tag:artwork_type%3Dsculpture) [statue](https://wiki.openstreetmap.org/wiki/Tag:artwork_type%3Dstatue) [bust](https://wiki.openstreetmap.org/wiki/Tag:artwork_type%3Dbust) [stone](https://wiki.openstreetmap.org/wiki/Tag:artwork_type%3Dstone) [installation](https://wiki.openstreetmap.org/wiki/Tag:artwork_type%3Dinstallation) [graffiti](https://wiki.openstreetmap.org/wiki/Tag:artwork_type%3Dgraffiti) [relief](https://wiki.openstreetmap.org/wiki/Tag:artwork_type%3Drelief) [azulejo](https://wiki.openstreetmap.org/wiki/Tag:artwork_type%3Dazulejo) [tilework](https://wiki.openstreetmap.org/wiki/Tag:artwork_type%3Dtilework) [woodcarving](https://wiki.openstreetmap.org/wiki/Tag:artwork_type%3Dwoodcarving) |
@@ -94,6 +95,13 @@ The question is `Is this drinking water spot still operational?`
- *This drinking water is closed* is shown if with operational_status=closed
- *This drinking water is permanently closed* is shown if with disused:amenity=drinking_water
+### fee
+
+The question is `Is this drinking water point free to use?`
+
+ - *Free to use* is shown if with fee=no
+ - *One needs to pay to use this drinking water point* is shown if with fee=yes
+
### type
The question is `What type of drinking water point is this?`
@@ -109,12 +117,15 @@ The question is `How easy is it to fill water bottles?`
- *It is easy to refill water bottles* is shown if with bottle=yes
- *Water bottles may not fit* is shown if with bottle=no
-### fee
+### temperature-cold
-The question is `Is this drinking water point free to use?`
+The question is `Is cold water available here?`
- - *Free to use* is shown if with fee=no
- - *One needs to pay to use this drinking water point* is shown if with fee=yes
+ - *Ice-cold water is provided here* is shown if with iced_water=yes. Unselecting this answer will add iced_water=no
+ - *Actively cooled water is available here* is shown if with cold_water=yes. Unselecting this answer will add cold_water=no
+ - *Ambient temperature water (without active cooling or heating) is available here* is shown if with room_temperature_water=yes. Unselecting this answer will add room_temperature_water=no
+ - *Warmed water is provided here; the water is not dangerously hot* is shown if with warm_water=yes. Unselecting this answer will add warm_water=no
+ - *Hot water is provided here* is shown if with hot_water=yes. Unselecting this answer will add hot_water=no
### seasonal
diff --git a/Docs/Layers/medical_shops.md b/Docs/Layers/medical_shops.md
index e7634985f..88ccb7f30 100644
--- a/Docs/Layers/medical_shops.md
+++ b/Docs/Layers/medical_shops.md
@@ -309,6 +309,7 @@ The question is `What kind of shop is this?`
- *Wig Shop* is shown if with shop=wigs
- *Window Blind Store* is shown if with shop=window_blind
- *Wine Shop* is shown if with shop=wine
+ - *This shop is no longer used. It is vacant* is shown if with disused:shop=
This tagrendering has labels
`description`
@@ -895,6 +896,7 @@ This tagrendering has labels
| shop_types.162 | Wig Shop | shop=wigs |
| shop_types.163 | Window Blind Store | shop=window_blind |
| shop_types.164 | Wine Shop | shop=wine |
+| shop_types.165 | This shop is no longer used. It is vacant | disused:shop= | (shop=disused | shop=vacant | disused:shop~^(.+)$ | abandoned:shop~^(.+)$) |
| id | question | osmTags |
-----|-----|----- |
diff --git a/Docs/Layers/recycling.md b/Docs/Layers/recycling.md
index faf05d059..aec480cfc 100644
--- a/Docs/Layers/recycling.md
+++ b/Docs/Layers/recycling.md
@@ -225,11 +225,11 @@ This tagrendering has labels
| id | question | osmTags |
-----|-----|----- |
-| centres_only.0 | All recycling types | recycling_type=centre |
+| centres_only.0 | Only recycling centres | recycling_type=centre |
| id | question | osmTags |
-----|-----|----- |
-| recyclingType.0 | *Only public access* (default) | |
+| recyclingType.0 | *All recycling types* (default) | |
| recyclingType.1 | Recycling of batteries | recycling:batteries=yes |
| recyclingType.2 | Recycling of beverage cartons | recycling:beverage_cartons=yes |
| recyclingType.3 | Recycling of cans | recycling:cans=yes |
diff --git a/Docs/Layers/scouting_group.md b/Docs/Layers/scouting_group.md
new file mode 100644
index 000000000..3b55b6ec4
--- /dev/null
+++ b/Docs/Layers/scouting_group.md
@@ -0,0 +1,141 @@
+[//]: # (WARNING: this file is automatically generated. Please find the sources at the bottom and edit those sources)
+
+# scouting_group
+
+A map showing scouting groups.
+
+ - This layer is shown at zoomlevel **4** and higher
+
+## Table of contents
+
+1. [Themes using this layer](#themes-using-this-layer)
+2. [Presets](#presets)
+3. [Basic tags for this layer](#basic-tags-for-this-layer)
+4. [Supported attributes](#supported-attributes)
+ - [name](#name)
+ - [association](#association)
+ - [phone](#phone)
+ - [email](#email)
+ - [website](#website)
+ - [questions](#questions)
+ - [mastodon](#mastodon)
+ - [move-button](#move-button)
+ - [lod](#lod)
+5. [Filters](#filters)
+
+## Themes using this layer
+
+ - [personal](https://mapcomplete.org/personal)
+ - [scouting](https://mapcomplete.org/scouting)
+
+## Presets
+
+The following options to create new points are included:
+
+ - **scouting group** which has the following tags:club=scout
+
+## Basic tags for this layer
+
+Elements must match the expression **club=scout**
+
+[Execute on overpass](http://overpass-turbo.eu/?Q=%5Bout%3Ajson%5D%5Btimeout%3A90%5D%3B%28%20%20%20%20nwr%5B%22club%22%3D%22scout%22%5D%28%7B%7Bbbox%7D%7D%29%3B%0A%29%3Bout%20body%3B%3E%3Bout%20skel%20qt%3B)
+
+## Supported attributes
+
+**Warning:**,this quick overview is incomplete,
+
+| attribute | type | values which are supported by this layer |
+-----|-----|----- |
+| [name](https://wiki.openstreetmap.org/wiki/Key:name) | [string](../SpecialInputElements.md#string) | |
+| [brand](https://wiki.openstreetmap.org/wiki/Key:brand) | [string](../SpecialInputElements.md#string) | |
+| [phone](https://wiki.openstreetmap.org/wiki/Key:phone) | [phone](../SpecialInputElements.md#phone) | |
+| [email](https://wiki.openstreetmap.org/wiki/Key:email) | [email](../SpecialInputElements.md#email) | |
+| [website](https://wiki.openstreetmap.org/wiki/Key:website) | [url](../SpecialInputElements.md#url) | |
+| [contact:mastodon](https://wiki.openstreetmap.org/wiki/Key:contact:mastodon) | [fediverse](../SpecialInputElements.md#fediverse) | |
+
+### name
+
+The question is `What is the name of this group?`
+*The name of this group is {name}* is shown if `name` is set
+
+### association
+
+The question is `To which scout association does {name} belong?`
+*The scout association of this group is {brand}* is shown if `brand` is set
+
+### phone
+
+The question is `What is the phone number of {title()}?`
+*{link(&LBRACEphone&RBRACE,tel:&LBRACEphone&RBRACE,,,,)}* is shown if `phone` is set
+
+ - *{link(&LBRACEcontact:phone&RBRACE,tel:&LBRACEcontact:phone&RBRACE,,,,)}* is shown if with contact:phone~.+. _This option cannot be chosen as answer_
+
+This tagrendering has labels
+`contact`
+
+### email
+
+The question is `What is the email address of {title()}?`
+*{email}* is shown if `email` is set
+
+ - *{contact:email}* is shown if with contact:email~.+. _This option cannot be chosen as answer_
+ - *{operator:email}* is shown if with operator:email~.+. _This option cannot be chosen as answer_
+
+This tagrendering has labels
+`contact`
+
+### website
+
+The question is `What is the website of {title()}?`
+*{website}* is shown if `website` is set
+
+ - *{contact:website}* is shown if with contact:website~.+. _This option cannot be chosen as answer_
+
+This tagrendering has labels
+`contact`
+
+### questions
+Show the questions block at this location
+_This tagrendering has no question and is thus read-only_
+*{questions()}*
+
+### mastodon
+Shows and asks for the mastodon handle
+The question is `What is the Mastodon-handle of {title()}?`
+*{fediverse_link(contact:mastodon)}* is shown if `contact:mastodon` is set
+
+### move-button
+
+_This tagrendering has no question and is thus read-only_
+*{move_button()}*
+
+### lod
+
+_This tagrendering has no question and is thus read-only_
+*{linked_data_from_website()}*
+
+This tagrendering has labels
+`added_by_default`
+
+## Filters
+
+| id | question | osmTags |
+-----|-----|----- |
+| brand.0 | *brand* (default) | |
+| brand.1 | Associação de Escuteiros de Angola | brand=Associação de Escuteiros de Angola | brand:wikidata=Q4810279 |
+| brand.2 | Bund der Pfadfinderinnen und Pfadfinder | brand=Bund der Pfadfinderinnen und Pfadfinder | brand:wikidata=Q1005225 |
+| brand.3 | Deutsche Pfadfinderschaft Sankt Georg | brand=Deutsche Pfadfinderschaft Sankt Georg | brand:wikidata=Q1203670 |
+| brand.4 | Girl Scouts | brand=Girl Scouts | brand:wikidata=Q2576280 | name=Girl Scouts |
+| brand.5 | Norges KFUK-KFUM-speidere | brand=Norges KFUK-KFUM-speidere | brand:wikidata=Q8046067 |
+| brand.6 | Norges speiderforbund | brand=Norges speiderforbund | brand:wikidata=Q1769346 |
+| brand.7 | Scoutisme Béninois | brand=Scoutisme Béninois | brand:wikidata=Q13534588 |
+| brand.8 | Scouts South Africa | brand=Scouts South Africa | brand:wikidata=Q7565791 |
+| brand.9 | The Botswana Scouts Association | brand=The Botswana Scouts Association | brand:wikidata=Q7719478 |
+| brand.10 | The Scout Association | brand=The Scout Association | brand:wikidata=Q849740 | name=The Scout Association |
+| brand.11 | Verband Christlicher Pfadfinder*innen | brand=Verband Christlicher Pfadfinder*innen | brand:wikidata=Q1316309 |
+| brand.12 | 香港女童軍總會 Hong Kong Girl Guides Association | brand=香港女童軍總會 | brand:en=Hong Kong Girl Guides Association | brand:wikidata=Q5894627 | brand:zh=香港女童軍總會 | brand:zh-Hans=香港女童军总会 | brand:zh-Hant=香港女童軍總會 |
+| brand.13 | 香港童軍總會 Scout Association of Hong Kong | brand=香港童軍總會 Scout Association of Hong Kong | brand:en=Scout Association of Hong Kong | brand:wikidata=Q1883585 | brand:zh=香港童軍總會 | brand:zh-Hans=香港童军总会 | brand:zh-Hant=香港童軍總會 |
+
+
+
+This document is autogenerated from [assets/layers/scouting_group/scouting_group.json](https://github.com/pietervdvn/MapComplete/blob/develop/assets/layers/scouting_group/scouting_group.json)
diff --git a/Docs/Layers/shops.md b/Docs/Layers/shops.md
index ec75f485d..85ec79f05 100644
--- a/Docs/Layers/shops.md
+++ b/Docs/Layers/shops.md
@@ -317,6 +317,7 @@ The question is `What kind of shop is this?`
- *Wig Shop* is shown if with shop=wigs
- *Window Blind Store* is shown if with shop=window_blind
- *Wine Shop* is shown if with shop=wine
+ - *This shop is no longer used. It is vacant* is shown if with disused:shop=
This tagrendering has labels
`description`
@@ -899,6 +900,7 @@ This tagrendering has labels
| shop_types.162 | Wig Shop | shop=wigs |
| shop_types.163 | Window Blind Store | shop=window_blind |
| shop_types.164 | Wine Shop | shop=wine |
+| shop_types.165 | This shop is no longer used. It is vacant | disused:shop= | (shop=disused | shop=vacant | disused:shop~^(.+)$ | abandoned:shop~^(.+)$) |
| id | question | osmTags |
-----|-----|----- |
diff --git a/Docs/Layers/shops_glutenfree.md b/Docs/Layers/shops_glutenfree.md
index dab4a08e6..3650ae9db 100644
--- a/Docs/Layers/shops_glutenfree.md
+++ b/Docs/Layers/shops_glutenfree.md
@@ -314,6 +314,7 @@ The question is `What kind of shop is this?`
- *Wig Shop* is shown if with shop=wigs
- *Window Blind Store* is shown if with shop=window_blind
- *Wine Shop* is shown if with shop=wine
+ - *This shop is no longer used. It is vacant* is shown if with disused:shop=
This tagrendering has labels
`description`
@@ -883,6 +884,7 @@ This tagrendering has labels
| shop_types.162 | Wig Shop | shop=wigs |
| shop_types.163 | Window Blind Store | shop=window_blind |
| shop_types.164 | Wine Shop | shop=wine |
+| shop_types.165 | This shop is no longer used. It is vacant | disused:shop= | (shop=disused | shop=vacant | disused:shop~^(.+)$ | abandoned:shop~^(.+)$) |
| id | question | osmTags |
-----|-----|----- |
diff --git a/Docs/Layers/shops_lactosefree.md b/Docs/Layers/shops_lactosefree.md
index 5afdeb9e7..d9a2b0c37 100644
--- a/Docs/Layers/shops_lactosefree.md
+++ b/Docs/Layers/shops_lactosefree.md
@@ -314,6 +314,7 @@ The question is `What kind of shop is this?`
- *Wig Shop* is shown if with shop=wigs
- *Window Blind Store* is shown if with shop=window_blind
- *Wine Shop* is shown if with shop=wine
+ - *This shop is no longer used. It is vacant* is shown if with disused:shop=
This tagrendering has labels
`description`
@@ -883,6 +884,7 @@ This tagrendering has labels
| shop_types.162 | Wig Shop | shop=wigs |
| shop_types.163 | Window Blind Store | shop=window_blind |
| shop_types.164 | Wine Shop | shop=wine |
+| shop_types.165 | This shop is no longer used. It is vacant | disused:shop= | (shop=disused | shop=vacant | disused:shop~^(.+)$ | abandoned:shop~^(.+)$) |
| id | question | osmTags |
-----|-----|----- |
diff --git a/Docs/Layers/shops_second_hand.md b/Docs/Layers/shops_second_hand.md
index 238460a96..4fba56c96 100644
--- a/Docs/Layers/shops_second_hand.md
+++ b/Docs/Layers/shops_second_hand.md
@@ -300,6 +300,7 @@ The question is `What kind of shop is this?`
- *Wig Shop* is shown if with shop=wigs
- *Window Blind Store* is shown if with shop=window_blind
- *Wine Shop* is shown if with shop=wine
+ - *This shop is no longer used. It is vacant* is shown if with disused:shop=
This tagrendering has labels
`description`
@@ -874,6 +875,7 @@ This tagrendering has labels
| shop_types.162 | Wig Shop | shop=wigs |
| shop_types.163 | Window Blind Store | shop=window_blind |
| shop_types.164 | Wine Shop | shop=wine |
+| shop_types.165 | This shop is no longer used. It is vacant | disused:shop= | (shop=disused | shop=vacant | disused:shop~^(.+)$ | abandoned:shop~^(.+)$) |
| id | question | osmTags |
-----|-----|----- |
diff --git a/Docs/Layers/shops_with_climbing_shoe_repair.md b/Docs/Layers/shops_with_climbing_shoe_repair.md
index e03c30184..25baf7c8f 100644
--- a/Docs/Layers/shops_with_climbing_shoe_repair.md
+++ b/Docs/Layers/shops_with_climbing_shoe_repair.md
@@ -309,6 +309,7 @@ The question is `What kind of shop is this?`
- *Wig Shop* is shown if with shop=wigs
- *Window Blind Store* is shown if with shop=window_blind
- *Wine Shop* is shown if with shop=wine
+ - *This shop is no longer used. It is vacant* is shown if with disused:shop=
This tagrendering has labels
`description`
@@ -891,6 +892,7 @@ This tagrendering has labels
| shop_types.162 | Wig Shop | shop=wigs |
| shop_types.163 | Window Blind Store | shop=window_blind |
| shop_types.164 | Wine Shop | shop=wine |
+| shop_types.165 | This shop is no longer used. It is vacant | disused:shop= | (shop=disused | shop=vacant | disused:shop~^(.+)$ | abandoned:shop~^(.+)$) |
| id | question | osmTags |
-----|-----|----- |
diff --git a/Docs/Layers/sport_pitch.md b/Docs/Layers/sport_pitch.md
index 52d2dc67d..afb79ad22 100644
--- a/Docs/Layers/sport_pitch.md
+++ b/Docs/Layers/sport_pitch.md
@@ -40,6 +40,8 @@ The following options to create new points are included:
- **a tabletennis table** which has the following tags:leisure=pitch & sport=table_tennis
- **a sport pitch** which has the following tags:leisure=pitch & fixme=Geometry to be drawn, added by MapComplete
+ - **a skatepark** which has the following tags:leisure=pitch & sport=skateboard
+ - **a horse riding arena** which has the following tags:leisure=pitch & sport=equestrian
## Basic tags for this layer
@@ -53,7 +55,7 @@ Elements must match the expression ** [sport](https://wiki.openstreetmap.org/wiki/Key:sport) | [string](../SpecialInputElements.md#string) | [basketball](https://wiki.openstreetmap.org/wiki/Tag:sport%3Dbasketball) [soccer](https://wiki.openstreetmap.org/wiki/Tag:sport%3Dsoccer) [table_tennis](https://wiki.openstreetmap.org/wiki/Tag:sport%3Dtable_tennis) [tennis](https://wiki.openstreetmap.org/wiki/Tag:sport%3Dtennis) [korfball](https://wiki.openstreetmap.org/wiki/Tag:sport%3Dkorfball) [skateboard](https://wiki.openstreetmap.org/wiki/Tag:sport%3Dskateboard) |
+| [sport](https://wiki.openstreetmap.org/wiki/Key:sport) | [string](../SpecialInputElements.md#string) | [basketball](https://wiki.openstreetmap.org/wiki/Tag:sport%3Dbasketball) [soccer](https://wiki.openstreetmap.org/wiki/Tag:sport%3Dsoccer) [table_tennis](https://wiki.openstreetmap.org/wiki/Tag:sport%3Dtable_tennis) [tennis](https://wiki.openstreetmap.org/wiki/Tag:sport%3Dtennis) [korfball](https://wiki.openstreetmap.org/wiki/Tag:sport%3Dkorfball) [skateboard](https://wiki.openstreetmap.org/wiki/Tag:sport%3Dskateboard) [equestrian](https://wiki.openstreetmap.org/wiki/Tag:sport%3Dequestrian) |
| [hoops](https://wiki.openstreetmap.org/wiki/Key:hoops) | Multiple choice | [1](https://wiki.openstreetmap.org/wiki/Tag:hoops%3D1) [2](https://wiki.openstreetmap.org/wiki/Tag:hoops%3D2) [4](https://wiki.openstreetmap.org/wiki/Tag:hoops%3D4) |
| [surface](https://wiki.openstreetmap.org/wiki/Key:surface) | [string](../SpecialInputElements.md#string) | [grass](https://wiki.openstreetmap.org/wiki/Tag:surface%3Dgrass) [sand](https://wiki.openstreetmap.org/wiki/Tag:surface%3Dsand) [paving_stones](https://wiki.openstreetmap.org/wiki/Tag:surface%3Dpaving_stones) [asphalt](https://wiki.openstreetmap.org/wiki/Tag:surface%3Dasphalt) [concrete](https://wiki.openstreetmap.org/wiki/Tag:surface%3Dconcrete) [fine_gravel](https://wiki.openstreetmap.org/wiki/Tag:surface%3Dfine_gravel) [tartan](https://wiki.openstreetmap.org/wiki/Tag:surface%3Dtartan) |
| [access](https://wiki.openstreetmap.org/wiki/Key:access) | Multiple choice | [yes](https://wiki.openstreetmap.org/wiki/Tag:access%3Dyes) [limited](https://wiki.openstreetmap.org/wiki/Tag:access%3Dlimited) [members](https://wiki.openstreetmap.org/wiki/Tag:access%3Dmembers) [private](https://wiki.openstreetmap.org/wiki/Tag:access%3Dprivate) |
@@ -79,6 +81,7 @@ The question is `Which sport can be played here?`
- *Korfball is played here* is shown if with sport=korfball
- *Basketball is played here* is shown if with sport=basket. _This option cannot be chosen as answer_
- *This is a skatepark* is shown if with sport=skateboard
+ - *This is a horse riding arena* is shown if with sport=equestrian
### basketball-hoops
@@ -185,7 +188,8 @@ This tagrendering has labels
| sport_pitch-sport.4 | Tennis is played here | sport=tennis |
| sport_pitch-sport.5 | Korfball is played here | sport=korfball |
| sport_pitch-sport.6 | Basketball is played here | sport=basket |
-| sport_pitch-sport.7 | This is a skatepark | sport~^(.+;)?skateboard(;.+)$ |
+| sport_pitch-sport.7 | This is a skatepark | sport=skateboard |
+| sport_pitch-sport.8 | This is a horse riding arena | sport=equestrian |
diff --git a/Docs/Layers/sport_shops.md b/Docs/Layers/sport_shops.md
index 5e2c34256..30804ff41 100644
--- a/Docs/Layers/sport_shops.md
+++ b/Docs/Layers/sport_shops.md
@@ -304,6 +304,7 @@ The question is `What kind of shop is this?`
- *Wig Shop* is shown if with shop=wigs
- *Window Blind Store* is shown if with shop=window_blind
- *Wine Shop* is shown if with shop=wine
+ - *This shop is no longer used. It is vacant* is shown if with disused:shop=
This tagrendering has labels
`description`
@@ -886,6 +887,7 @@ This tagrendering has labels
| shop_types.162 | Wig Shop | shop=wigs |
| shop_types.163 | Window Blind Store | shop=window_blind |
| shop_types.164 | Wine Shop | shop=wine |
+| shop_types.165 | This shop is no longer used. It is vacant | disused:shop= | (shop=disused | shop=vacant | disused:shop~^(.+)$ | abandoned:shop~^(.+)$) |
| id | question | osmTags |
-----|-----|----- |
diff --git a/Docs/Layers/toilet.md b/Docs/Layers/toilet.md
index 05b4f5846..6d5cf2522 100644
--- a/Docs/Layers/toilet.md
+++ b/Docs/Layers/toilet.md
@@ -13,6 +13,7 @@ A layer showing (public) toilets
3. [Basic tags for this layer](#basic-tags-for-this-layer)
4. [Supported attributes](#supported-attributes)
- [images](#images)
+ - [toilet-reviews](#toilet-reviews)
- [repeated](#repeated)
- [single_level](#single_level)
- [toilet-access](#toilet-access)
@@ -92,6 +93,11 @@ This block shows the known images which are linked with the `image`-keys, but al
_This tagrendering has no question and is thus read-only_
*{image_carousel()}{image_upload()}*
+### toilet-reviews
+
+_This tagrendering has no question and is thus read-only_
+*{reviews(,toilet,How would you rate this toilet?)}*
+
### repeated
_This tagrendering has no question and is thus read-only_
diff --git a/Docs/Layers/vending_machine.md b/Docs/Layers/vending_machine.md
index 543e29147..086fd8805 100644
--- a/Docs/Layers/vending_machine.md
+++ b/Docs/Layers/vending_machine.md
@@ -4,7 +4,7 @@
Layer showing vending machines
- - This layer is shown at zoomlevel **0** and higher
+ - This layer is shown at zoomlevel **13** and higher
## Table of contents
diff --git a/Docs/Schemas/FilterConfigJson.schema.json b/Docs/Schemas/FilterConfigJson.schema.json
index 208c4ecb4..74d9c1dd4 100644
--- a/Docs/Schemas/FilterConfigJson.schema.json
+++ b/Docs/Schemas/FilterConfigJson.schema.json
@@ -5,6 +5,10 @@
"description": "An id/name for this filter, used to set the URL parameters",
"type": "string"
},
+ "strict": {
+ "description": "If set, the options will be pruned. Only items for which the filter match the layer source will be kept.\n\nFor example, we import types of brands from the nsi. This contains a ton of items, e.g.\n[{question: \"Brand X\", osmTags: {\"and\": [\"shop=clothes\", \"brand=Brand X]}, {osmTags: {\"and\": \"shop=convenience\", ...} ...} ]\nOf course, when making a layer about `shop=clothes`, we'll only want to keep the clothes shops.\nIf set to strict and the source is `shop=clothes`, only those options which have shop=clothes will be returned",
+ "type": "boolean"
+ },
"options": {
"description": "The options for a filter\nIf there are multiple options these will be a list of radio buttons\nIf there is only one option this will be a checkbox\nFiltering is done based on the given osmTags that are compared to the objects in that layer.\n\nAn example which searches by name:\n\n```\n{\n \"id\": \"shop-name\",\n \"options\": [\n {\n \"fields\": [\n {\n \"name\": \"search\",\n \"type\": \"string\"\n }\n ],\n \"osmTags\": \"name~i~.*{search}.*\",\n \"question\": {\n \"en\": \"Only show shops with name {search}\",\n }\n }\n ]\n }\n ```",
"type": "array",
diff --git a/Docs/Schemas/FilterConfigJsonJSC.ts b/Docs/Schemas/FilterConfigJsonJSC.ts
index 2ae822cd3..4a4d5c9f4 100644
--- a/Docs/Schemas/FilterConfigJsonJSC.ts
+++ b/Docs/Schemas/FilterConfigJsonJSC.ts
@@ -5,6 +5,10 @@ export default {
"description": "An id/name for this filter, used to set the URL parameters",
"type": "string"
},
+ "strict": {
+ "description": "If set, the options will be pruned. Only items for which the filter match the layer source will be kept.\n\nFor example, we import types of brands from the nsi. This contains a ton of items, e.g.\n[{question: \"Brand X\", osmTags: {\"and\": [\"shop=clothes\", \"brand=Brand X]}, {osmTags: {\"and\": \"shop=convenience\", ...} ...} ]\nOf course, when making a layer about `shop=clothes`, we'll only want to keep the clothes shops.\nIf set to strict and the source is `shop=clothes`, only those options which have shop=clothes will be returned",
+ "type": "boolean"
+ },
"options": {
"description": "The options for a filter\nIf there are multiple options these will be a list of radio buttons\nIf there is only one option this will be a checkbox\nFiltering is done based on the given osmTags that are compared to the objects in that layer.\n\nAn example which searches by name:\n\n```\n{\n \"id\": \"shop-name\",\n \"options\": [\n {\n \"fields\": [\n {\n \"name\": \"search\",\n \"type\": \"string\"\n }\n ],\n \"osmTags\": \"name~i~.*{search}.*\",\n \"question\": {\n \"en\": \"Only show shops with name {search}\",\n }\n }\n ]\n }\n ```",
"type": "array",
diff --git a/Docs/Schemas/IconConfigJson.schema.json b/Docs/Schemas/IconConfigJson.schema.json
index 144998e53..24953a630 100644
--- a/Docs/Schemas/IconConfigJson.schema.json
+++ b/Docs/Schemas/IconConfigJson.schema.json
@@ -2,7 +2,7 @@
"type": "object",
"properties": {
"icon": {
- "description": "question: What icon should be used?\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))",
+ "description": "question: What icon should be used?\n\nTo reuse icons from a different layer of a library:\n- The library layer has, within tagRenderings one which will output the URL of the image (e.g. mappings: {\"if\": \"shop=xyz\", then: \"./assets/icons/shop_xyz.png\"})\n- Use \"layer_id.tagrendering_id\"\n\nNote that if you reuse icons from a different icon set, you'll probably want to use `override` to set a default rendering\n\n\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return [ \"nsi_brand.icon\", \"nsi_operator.icon\", \"id_presets.shop_rendering\", ...Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))]",
"anyOf": [
{
"$ref": "#/definitions/MinimalTagRenderingConfigJson"
diff --git a/Docs/Schemas/IconConfigJsonJSC.ts b/Docs/Schemas/IconConfigJsonJSC.ts
index 58e5b4541..6ece3c0de 100644
--- a/Docs/Schemas/IconConfigJsonJSC.ts
+++ b/Docs/Schemas/IconConfigJsonJSC.ts
@@ -2,7 +2,7 @@ export default {
"type": "object",
"properties": {
"icon": {
- "description": "question: What icon should be used?\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))",
+ "description": "question: What icon should be used?\n\nTo reuse icons from a different layer of a library:\n- The library layer has, within tagRenderings one which will output the URL of the image (e.g. mappings: {\"if\": \"shop=xyz\", then: \"./assets/icons/shop_xyz.png\"})\n- Use \"layer_id.tagrendering_id\"\n\nNote that if you reuse icons from a different icon set, you'll probably want to use `override` to set a default rendering\n\n\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return [ \"nsi_brand.icon\", \"nsi_operator.icon\", \"id_presets.shop_rendering\", ...Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))]",
"anyOf": [
{
"$ref": "#/definitions/MinimalTagRenderingConfigJson"
diff --git a/Docs/Schemas/LayerConfigJson.schema.json b/Docs/Schemas/LayerConfigJson.schema.json
index 3be482027..00cae969c 100644
--- a/Docs/Schemas/LayerConfigJson.schema.json
+++ b/Docs/Schemas/LayerConfigJson.schema.json
@@ -435,6 +435,13 @@
"type": "string"
}
]
+ },
+ "#dont-translate": {
+ "description": "group: hidden",
+ "enum": [
+ "*"
+ ],
+ "type": "string"
}
},
"required": [
@@ -676,7 +683,7 @@
"type": "object",
"properties": {
"icon": {
- "description": "question: What icon should be used?\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))",
+ "description": "question: What icon should be used?\n\nTo reuse icons from a different layer of a library:\n- The library layer has, within tagRenderings one which will output the URL of the image (e.g. mappings: {\"if\": \"shop=xyz\", then: \"./assets/icons/shop_xyz.png\"})\n- Use \"layer_id.tagrendering_id\"\n\nNote that if you reuse icons from a different icon set, you'll probably want to use `override` to set a default rendering\n\n\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return [ \"nsi_brand.icon\", \"nsi_operator.icon\", \"id_presets.shop_rendering\", ...Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))]",
"anyOf": [
{
"$ref": "#/definitions/MinimalTagRenderingConfigJson"
@@ -1927,6 +1934,10 @@
"description": "An id/name for this filter, used to set the URL parameters",
"type": "string"
},
+ "strict": {
+ "description": "If set, the options will be pruned. Only items for which the filter match the layer source will be kept.\n\nFor example, we import types of brands from the nsi. This contains a ton of items, e.g.\n[{question: \"Brand X\", osmTags: {\"and\": [\"shop=clothes\", \"brand=Brand X]}, {osmTags: {\"and\": \"shop=convenience\", ...} ...} ]\nOf course, when making a layer about `shop=clothes`, we'll only want to keep the clothes shops.\nIf set to strict and the source is `shop=clothes`, only those options which have shop=clothes will be returned",
+ "type": "boolean"
+ },
"options": {
"description": "The options for a filter\nIf there are multiple options these will be a list of radio buttons\nIf there is only one option this will be a checkbox\nFiltering is done based on the given osmTags that are compared to the objects in that layer.\n\nAn example which searches by name:\n\n```\n{\n \"id\": \"shop-name\",\n \"options\": [\n {\n \"fields\": [\n {\n \"name\": \"search\",\n \"type\": \"string\"\n }\n ],\n \"osmTags\": \"name~i~.*{search}.*\",\n \"question\": {\n \"en\": \"Only show shops with name {search}\",\n }\n }\n ]\n }\n ```",
"type": "array",
diff --git a/Docs/Schemas/LayerConfigJsonJSC.ts b/Docs/Schemas/LayerConfigJsonJSC.ts
index 8255d3934..ac04a5891 100644
--- a/Docs/Schemas/LayerConfigJsonJSC.ts
+++ b/Docs/Schemas/LayerConfigJsonJSC.ts
@@ -435,6 +435,13 @@ export default {
"type": "string"
}
]
+ },
+ "#dont-translate": {
+ "description": "group: hidden",
+ "enum": [
+ "*"
+ ],
+ "type": "string"
}
},
"required": [
@@ -668,7 +675,7 @@ export default {
"type": "object",
"properties": {
"icon": {
- "description": "question: What icon should be used?\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))",
+ "description": "question: What icon should be used?\n\nTo reuse icons from a different layer of a library:\n- The library layer has, within tagRenderings one which will output the URL of the image (e.g. mappings: {\"if\": \"shop=xyz\", then: \"./assets/icons/shop_xyz.png\"})\n- Use \"layer_id.tagrendering_id\"\n\nNote that if you reuse icons from a different icon set, you'll probably want to use `override` to set a default rendering\n\n\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return [ \"nsi_brand.icon\", \"nsi_operator.icon\", \"id_presets.shop_rendering\", ...Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))]",
"anyOf": [
{
"$ref": "#/definitions/MinimalTagRenderingConfigJson"
@@ -1910,6 +1917,10 @@ export default {
"description": "An id/name for this filter, used to set the URL parameters",
"type": "string"
},
+ "strict": {
+ "description": "If set, the options will be pruned. Only items for which the filter match the layer source will be kept.\n\nFor example, we import types of brands from the nsi. This contains a ton of items, e.g.\n[{question: \"Brand X\", osmTags: {\"and\": [\"shop=clothes\", \"brand=Brand X]}, {osmTags: {\"and\": \"shop=convenience\", ...} ...} ]\nOf course, when making a layer about `shop=clothes`, we'll only want to keep the clothes shops.\nIf set to strict and the source is `shop=clothes`, only those options which have shop=clothes will be returned",
+ "type": "boolean"
+ },
"options": {
"description": "The options for a filter\nIf there are multiple options these will be a list of radio buttons\nIf there is only one option this will be a checkbox\nFiltering is done based on the given osmTags that are compared to the objects in that layer.\n\nAn example which searches by name:\n\n```\n{\n \"id\": \"shop-name\",\n \"options\": [\n {\n \"fields\": [\n {\n \"name\": \"search\",\n \"type\": \"string\"\n }\n ],\n \"osmTags\": \"name~i~.*{search}.*\",\n \"question\": {\n \"en\": \"Only show shops with name {search}\",\n }\n }\n ]\n }\n ```",
"type": "array",
diff --git a/Docs/Schemas/LineRenderingConfigJson.schema.json b/Docs/Schemas/LineRenderingConfigJson.schema.json
index 6356b7d70..309d5da23 100644
--- a/Docs/Schemas/LineRenderingConfigJson.schema.json
+++ b/Docs/Schemas/LineRenderingConfigJson.schema.json
@@ -327,7 +327,7 @@
"type": "object",
"properties": {
"icon": {
- "description": "question: What icon should be used?\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))",
+ "description": "question: What icon should be used?\n\nTo reuse icons from a different layer of a library:\n- The library layer has, within tagRenderings one which will output the URL of the image (e.g. mappings: {\"if\": \"shop=xyz\", then: \"./assets/icons/shop_xyz.png\"})\n- Use \"layer_id.tagrendering_id\"\n\nNote that if you reuse icons from a different icon set, you'll probably want to use `override` to set a default rendering\n\n\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return [ \"nsi_brand.icon\", \"nsi_operator.icon\", \"id_presets.shop_rendering\", ...Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))]",
"anyOf": [
{
"$ref": "#/definitions/MinimalTagRenderingConfigJson"
diff --git a/Docs/Schemas/LineRenderingConfigJsonJSC.ts b/Docs/Schemas/LineRenderingConfigJsonJSC.ts
index 538d32d37..65a2ed2a1 100644
--- a/Docs/Schemas/LineRenderingConfigJsonJSC.ts
+++ b/Docs/Schemas/LineRenderingConfigJsonJSC.ts
@@ -319,7 +319,7 @@ export default {
"type": "object",
"properties": {
"icon": {
- "description": "question: What icon should be used?\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))",
+ "description": "question: What icon should be used?\n\nTo reuse icons from a different layer of a library:\n- The library layer has, within tagRenderings one which will output the URL of the image (e.g. mappings: {\"if\": \"shop=xyz\", then: \"./assets/icons/shop_xyz.png\"})\n- Use \"layer_id.tagrendering_id\"\n\nNote that if you reuse icons from a different icon set, you'll probably want to use `override` to set a default rendering\n\n\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return [ \"nsi_brand.icon\", \"nsi_operator.icon\", \"id_presets.shop_rendering\", ...Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))]",
"anyOf": [
{
"$ref": "#/definitions/MinimalTagRenderingConfigJson"
diff --git a/Docs/Schemas/MappingConfigJson.schema.json b/Docs/Schemas/MappingConfigJson.schema.json
index 0df8a69e9..e9947702b 100644
--- a/Docs/Schemas/MappingConfigJson.schema.json
+++ b/Docs/Schemas/MappingConfigJson.schema.json
@@ -354,7 +354,7 @@
"type": "object",
"properties": {
"icon": {
- "description": "question: What icon should be used?\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))",
+ "description": "question: What icon should be used?\n\nTo reuse icons from a different layer of a library:\n- The library layer has, within tagRenderings one which will output the URL of the image (e.g. mappings: {\"if\": \"shop=xyz\", then: \"./assets/icons/shop_xyz.png\"})\n- Use \"layer_id.tagrendering_id\"\n\nNote that if you reuse icons from a different icon set, you'll probably want to use `override` to set a default rendering\n\n\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return [ \"nsi_brand.icon\", \"nsi_operator.icon\", \"id_presets.shop_rendering\", ...Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))]",
"anyOf": [
{
"$ref": "#/definitions/MinimalTagRenderingConfigJson"
diff --git a/Docs/Schemas/MappingConfigJsonJSC.ts b/Docs/Schemas/MappingConfigJsonJSC.ts
index 038d93acf..8ef62eac1 100644
--- a/Docs/Schemas/MappingConfigJsonJSC.ts
+++ b/Docs/Schemas/MappingConfigJsonJSC.ts
@@ -346,7 +346,7 @@ export default {
"type": "object",
"properties": {
"icon": {
- "description": "question: What icon should be used?\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))",
+ "description": "question: What icon should be used?\n\nTo reuse icons from a different layer of a library:\n- The library layer has, within tagRenderings one which will output the URL of the image (e.g. mappings: {\"if\": \"shop=xyz\", then: \"./assets/icons/shop_xyz.png\"})\n- Use \"layer_id.tagrendering_id\"\n\nNote that if you reuse icons from a different icon set, you'll probably want to use `override` to set a default rendering\n\n\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return [ \"nsi_brand.icon\", \"nsi_operator.icon\", \"id_presets.shop_rendering\", ...Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))]",
"anyOf": [
{
"$ref": "#/definitions/MinimalTagRenderingConfigJson"
diff --git a/Docs/Schemas/PointRenderingConfigJson.schema.json b/Docs/Schemas/PointRenderingConfigJson.schema.json
index be4250b04..d11295274 100644
--- a/Docs/Schemas/PointRenderingConfigJson.schema.json
+++ b/Docs/Schemas/PointRenderingConfigJson.schema.json
@@ -401,7 +401,7 @@
"type": "object",
"properties": {
"icon": {
- "description": "question: What icon should be used?\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))",
+ "description": "question: What icon should be used?\n\nTo reuse icons from a different layer of a library:\n- The library layer has, within tagRenderings one which will output the URL of the image (e.g. mappings: {\"if\": \"shop=xyz\", then: \"./assets/icons/shop_xyz.png\"})\n- Use \"layer_id.tagrendering_id\"\n\nNote that if you reuse icons from a different icon set, you'll probably want to use `override` to set a default rendering\n\n\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return [ \"nsi_brand.icon\", \"nsi_operator.icon\", \"id_presets.shop_rendering\", ...Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))]",
"anyOf": [
{
"$ref": "#/definitions/MinimalTagRenderingConfigJson"
diff --git a/Docs/Schemas/PointRenderingConfigJsonJSC.ts b/Docs/Schemas/PointRenderingConfigJsonJSC.ts
index eaee1ea00..184704299 100644
--- a/Docs/Schemas/PointRenderingConfigJsonJSC.ts
+++ b/Docs/Schemas/PointRenderingConfigJsonJSC.ts
@@ -393,7 +393,7 @@ export default {
"type": "object",
"properties": {
"icon": {
- "description": "question: What icon should be used?\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))",
+ "description": "question: What icon should be used?\n\nTo reuse icons from a different layer of a library:\n- The library layer has, within tagRenderings one which will output the URL of the image (e.g. mappings: {\"if\": \"shop=xyz\", then: \"./assets/icons/shop_xyz.png\"})\n- Use \"layer_id.tagrendering_id\"\n\nNote that if you reuse icons from a different icon set, you'll probably want to use `override` to set a default rendering\n\n\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return [ \"nsi_brand.icon\", \"nsi_operator.icon\", \"id_presets.shop_rendering\", ...Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))]",
"anyOf": [
{
"$ref": "#/definitions/MinimalTagRenderingConfigJson"
diff --git a/Docs/Schemas/QuestionableTagRenderingConfigJson.schema.json b/Docs/Schemas/QuestionableTagRenderingConfigJson.schema.json
index 32a198103..8dab5d938 100644
--- a/Docs/Schemas/QuestionableTagRenderingConfigJson.schema.json
+++ b/Docs/Schemas/QuestionableTagRenderingConfigJson.schema.json
@@ -487,7 +487,7 @@
"type": "object",
"properties": {
"icon": {
- "description": "question: What icon should be used?\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))",
+ "description": "question: What icon should be used?\n\nTo reuse icons from a different layer of a library:\n- The library layer has, within tagRenderings one which will output the URL of the image (e.g. mappings: {\"if\": \"shop=xyz\", then: \"./assets/icons/shop_xyz.png\"})\n- Use \"layer_id.tagrendering_id\"\n\nNote that if you reuse icons from a different icon set, you'll probably want to use `override` to set a default rendering\n\n\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return [ \"nsi_brand.icon\", \"nsi_operator.icon\", \"id_presets.shop_rendering\", ...Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))]",
"anyOf": [
{
"$ref": "#/definitions/MinimalTagRenderingConfigJson"
diff --git a/Docs/Schemas/QuestionableTagRenderingConfigJsonJSC.ts b/Docs/Schemas/QuestionableTagRenderingConfigJsonJSC.ts
index 1e77be253..649892ff4 100644
--- a/Docs/Schemas/QuestionableTagRenderingConfigJsonJSC.ts
+++ b/Docs/Schemas/QuestionableTagRenderingConfigJsonJSC.ts
@@ -479,7 +479,7 @@ export default {
"type": "object",
"properties": {
"icon": {
- "description": "question: What icon should be used?\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))",
+ "description": "question: What icon should be used?\n\nTo reuse icons from a different layer of a library:\n- The library layer has, within tagRenderings one which will output the URL of the image (e.g. mappings: {\"if\": \"shop=xyz\", then: \"./assets/icons/shop_xyz.png\"})\n- Use \"layer_id.tagrendering_id\"\n\nNote that if you reuse icons from a different icon set, you'll probably want to use `override` to set a default rendering\n\n\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return [ \"nsi_brand.icon\", \"nsi_operator.icon\", \"id_presets.shop_rendering\", ...Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))]",
"anyOf": [
{
"$ref": "#/definitions/MinimalTagRenderingConfigJson"
diff --git a/Docs/Schemas/RewritableConfigJson.schema.json b/Docs/Schemas/RewritableConfigJson.schema.json
index bf0b5a8f9..8a7d26ffc 100644
--- a/Docs/Schemas/RewritableConfigJson.schema.json
+++ b/Docs/Schemas/RewritableConfigJson.schema.json
@@ -281,7 +281,7 @@
"type": "object",
"properties": {
"icon": {
- "description": "question: What icon should be used?\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))",
+ "description": "question: What icon should be used?\n\nTo reuse icons from a different layer of a library:\n- The library layer has, within tagRenderings one which will output the URL of the image (e.g. mappings: {\"if\": \"shop=xyz\", then: \"./assets/icons/shop_xyz.png\"})\n- Use \"layer_id.tagrendering_id\"\n\nNote that if you reuse icons from a different icon set, you'll probably want to use `override` to set a default rendering\n\n\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return [ \"nsi_brand.icon\", \"nsi_operator.icon\", \"id_presets.shop_rendering\", ...Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))]",
"anyOf": [
{
"$ref": "#/definitions/MinimalTagRenderingConfigJson"
diff --git a/Docs/Schemas/RewritableConfigJsonJSC.ts b/Docs/Schemas/RewritableConfigJsonJSC.ts
index 8aeff2d24..a39d314c6 100644
--- a/Docs/Schemas/RewritableConfigJsonJSC.ts
+++ b/Docs/Schemas/RewritableConfigJsonJSC.ts
@@ -273,7 +273,7 @@ export default {
"type": "object",
"properties": {
"icon": {
- "description": "question: What icon should be used?\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))",
+ "description": "question: What icon should be used?\n\nTo reuse icons from a different layer of a library:\n- The library layer has, within tagRenderings one which will output the URL of the image (e.g. mappings: {\"if\": \"shop=xyz\", then: \"./assets/icons/shop_xyz.png\"})\n- Use \"layer_id.tagrendering_id\"\n\nNote that if you reuse icons from a different icon set, you'll probably want to use `override` to set a default rendering\n\n\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return [ \"nsi_brand.icon\", \"nsi_operator.icon\", \"id_presets.shop_rendering\", ...Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))]",
"anyOf": [
{
"$ref": "#/definitions/MinimalTagRenderingConfigJson"
diff --git a/Docs/Schemas/ThemeConfigJson.schema.json b/Docs/Schemas/ThemeConfigJson.schema.json
index 0c2b7d27e..eb850a9f0 100644
--- a/Docs/Schemas/ThemeConfigJson.schema.json
+++ b/Docs/Schemas/ThemeConfigJson.schema.json
@@ -556,7 +556,7 @@
"type": "object",
"properties": {
"icon": {
- "description": "question: What icon should be used?\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))",
+ "description": "question: What icon should be used?\n\nTo reuse icons from a different layer of a library:\n- The library layer has, within tagRenderings one which will output the URL of the image (e.g. mappings: {\"if\": \"shop=xyz\", then: \"./assets/icons/shop_xyz.png\"})\n- Use \"layer_id.tagrendering_id\"\n\nNote that if you reuse icons from a different icon set, you'll probably want to use `override` to set a default rendering\n\n\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return [ \"nsi_brand.icon\", \"nsi_operator.icon\", \"id_presets.shop_rendering\", ...Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))]",
"anyOf": [
{
"$ref": "#/definitions/MinimalTagRenderingConfigJson"
@@ -1807,6 +1807,10 @@
"description": "An id/name for this filter, used to set the URL parameters",
"type": "string"
},
+ "strict": {
+ "description": "If set, the options will be pruned. Only items for which the filter match the layer source will be kept.\n\nFor example, we import types of brands from the nsi. This contains a ton of items, e.g.\n[{question: \"Brand X\", osmTags: {\"and\": [\"shop=clothes\", \"brand=Brand X]}, {osmTags: {\"and\": \"shop=convenience\", ...} ...} ]\nOf course, when making a layer about `shop=clothes`, we'll only want to keep the clothes shops.\nIf set to strict and the source is `shop=clothes`, only those options which have shop=clothes will be returned",
+ "type": "boolean"
+ },
"options": {
"description": "The options for a filter\nIf there are multiple options these will be a list of radio buttons\nIf there is only one option this will be a checkbox\nFiltering is done based on the given osmTags that are compared to the objects in that layer.\n\nAn example which searches by name:\n\n```\n{\n \"id\": \"shop-name\",\n \"options\": [\n {\n \"fields\": [\n {\n \"name\": \"search\",\n \"type\": \"string\"\n }\n ],\n \"osmTags\": \"name~i~.*{search}.*\",\n \"question\": {\n \"en\": \"Only show shops with name {search}\",\n }\n }\n ]\n }\n ```",
"type": "array",
@@ -2447,6 +2451,13 @@
"type": "string"
}
]
+ },
+ "#dont-translate": {
+ "description": "group: hidden",
+ "enum": [
+ "*"
+ ],
+ "type": "string"
}
},
"required": [
@@ -2891,6 +2902,13 @@
"type": "string"
}
]
+ },
+ "#dont-translate": {
+ "description": "group: hidden",
+ "enum": [
+ "*"
+ ],
+ "type": "string"
}
},
"additionalProperties": false
diff --git a/Docs/Schemas/ThemeConfigJsonJSC.ts b/Docs/Schemas/ThemeConfigJsonJSC.ts
index dc558a067..a5e51b7e5 100644
--- a/Docs/Schemas/ThemeConfigJsonJSC.ts
+++ b/Docs/Schemas/ThemeConfigJsonJSC.ts
@@ -548,7 +548,7 @@ export default {
"type": "object",
"properties": {
"icon": {
- "description": "question: What icon should be used?\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))",
+ "description": "question: What icon should be used?\n\nTo reuse icons from a different layer of a library:\n- The library layer has, within tagRenderings one which will output the URL of the image (e.g. mappings: {\"if\": \"shop=xyz\", then: \"./assets/icons/shop_xyz.png\"})\n- Use \"layer_id.tagrendering_id\"\n\nNote that if you reuse icons from a different icon set, you'll probably want to use `override` to set a default rendering\n\n\ntypes: Use a different icon depending on the value of some attributes ; icon\nsuggestions: return [ \"nsi_brand.icon\", \"nsi_operator.icon\", \"id_presets.shop_rendering\", ...Constants.defaultPinIcons.map(i => ({if: \"value=\"+i, then: i, icon: i}))]",
"anyOf": [
{
"$ref": "#/definitions/MinimalTagRenderingConfigJson"
@@ -1790,6 +1790,10 @@ export default {
"description": "An id/name for this filter, used to set the URL parameters",
"type": "string"
},
+ "strict": {
+ "description": "If set, the options will be pruned. Only items for which the filter match the layer source will be kept.\n\nFor example, we import types of brands from the nsi. This contains a ton of items, e.g.\n[{question: \"Brand X\", osmTags: {\"and\": [\"shop=clothes\", \"brand=Brand X]}, {osmTags: {\"and\": \"shop=convenience\", ...} ...} ]\nOf course, when making a layer about `shop=clothes`, we'll only want to keep the clothes shops.\nIf set to strict and the source is `shop=clothes`, only those options which have shop=clothes will be returned",
+ "type": "boolean"
+ },
"options": {
"description": "The options for a filter\nIf there are multiple options these will be a list of radio buttons\nIf there is only one option this will be a checkbox\nFiltering is done based on the given osmTags that are compared to the objects in that layer.\n\nAn example which searches by name:\n\n```\n{\n \"id\": \"shop-name\",\n \"options\": [\n {\n \"fields\": [\n {\n \"name\": \"search\",\n \"type\": \"string\"\n }\n ],\n \"osmTags\": \"name~i~.*{search}.*\",\n \"question\": {\n \"en\": \"Only show shops with name {search}\",\n }\n }\n ]\n }\n ```",
"type": "array",
@@ -2424,6 +2428,13 @@ export default {
"type": "string"
}
]
+ },
+ "#dont-translate": {
+ "description": "group: hidden",
+ "enum": [
+ "*"
+ ],
+ "type": "string"
}
},
"required": [
@@ -2867,6 +2878,13 @@ export default {
"type": "string"
}
]
+ },
+ "#dont-translate": {
+ "description": "group: hidden",
+ "enum": [
+ "*"
+ ],
+ "type": "string"
}
}
},
diff --git a/Docs/SpecialRenderings.md b/Docs/SpecialRenderings.md
index d067f931d..c3fc6627b 100644
--- a/Docs/SpecialRenderings.md
+++ b/Docs/SpecialRenderings.md
@@ -674,10 +674,11 @@ Invites the contributor to leave a review. Somewhat small UI-element until inter
-----|-----|----- |
| subjectKey | name | The key to use to determine the subject. If specified, the subject will be tags[subjectKey] |
| fallback | _undefined_ | The identifier to use, if tags[subjectKey] as specified above is not available. This is effectively a fallback value |
+| question | _undefined_ | The question to ask during the review |
#### Example usage of create_review
-`{create_review(name,)}`
+`{create_review(name,,)}`
### list_reviews
@@ -700,6 +701,7 @@ A pragmatic combination of `create_review` and `list_reviews`
-----|-----|----- |
| subjectKey | name | The key to use to determine the subject. If specified, the subject will be tags[subjectKey] |
| fallback | _undefined_ | The identifier to use, if tags[subjectKey] as specified above is not available. This is effectively a fallback value |
+| question | _undefined_ | The question to ask in the review form. Optional |
#### Example usage of reviews
diff --git a/Docs/TagInfo/mapcomplete_charging_stations.json b/Docs/TagInfo/mapcomplete_charging_stations.json
index fd38a749d..95e8d33d4 100644
--- a/Docs/TagInfo/mapcomplete_charging_stations.json
+++ b/Docs/TagInfo/mapcomplete_charging_stations.json
@@ -316,8 +316,8 @@
},
{
"key": "socket:schuko:voltage",
- "description": "Layer 'Charging stations' shows socket:schuko:voltage=230 V with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:schuko:voltage=230 with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
+ "value": "230"
},
{
"key": "socket:schuko:current",
@@ -325,8 +325,8 @@
},
{
"key": "socket:schuko:current",
- "description": "Layer 'Charging stations' shows socket:schuko:current=16 A with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
- "value": "16 A"
+ "description": "Layer 'Charging stations' shows socket:schuko:current=16 with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
+ "value": "16"
},
{
"key": "socket:schuko:output",
@@ -334,7 +334,7 @@
},
{
"key": "socket:schuko:output",
- "description": "Layer 'Charging stations' shows socket:schuko:output=3.6 kW with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 3.6 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
+ "description": "Layer 'Charging stations' shows socket:schuko:output=3.6 kW with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 3.6 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
"value": "3.6 kW"
},
{
@@ -347,8 +347,8 @@
},
{
"key": "socket:typee:voltage",
- "description": "Layer 'Charging stations' shows socket:typee:voltage=230 V with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:typee~.+ & socket:typee!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:typee:voltage=230 with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:typee~.+ & socket:typee!=0)",
+ "value": "230"
},
{
"key": "socket:typee:current",
@@ -356,8 +356,8 @@
},
{
"key": "socket:typee:current",
- "description": "Layer 'Charging stations' shows socket:typee:current=16 A with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:typee~.+ & socket:typee!=0)",
- "value": "16 A"
+ "description": "Layer 'Charging stations' shows socket:typee:current=16 with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:typee~.+ & socket:typee!=0)",
+ "value": "16"
},
{
"key": "socket:typee:output",
@@ -365,12 +365,12 @@
},
{
"key": "socket:typee:output",
- "description": "Layer 'Charging stations' shows socket:typee:output=3 kW with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 3 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:typee~.+ & socket:typee!=0)",
+ "description": "Layer 'Charging stations' shows socket:typee:output=3 kW with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 3 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:typee~.+ & socket:typee!=0)",
"value": "3 kW"
},
{
"key": "socket:typee:output",
- "description": "Layer 'Charging stations' shows socket:typee:output=22 kW with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 22 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:typee~.+ & socket:typee!=0)",
+ "description": "Layer 'Charging stations' shows socket:typee:output=22 kW with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 22 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:typee~.+ & socket:typee!=0)",
"value": "22 kW"
},
{
@@ -383,8 +383,8 @@
},
{
"key": "socket:chademo:voltage",
- "description": "Layer 'Charging stations' shows socket:chademo:voltage=500 V with a fixed text, namely 'Chademo outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
- "value": "500 V"
+ "description": "Layer 'Charging stations' shows socket:chademo:voltage=500 with a fixed text, namely 'Chademo outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
+ "value": "500"
},
{
"key": "socket:chademo:current",
@@ -392,8 +392,8 @@
},
{
"key": "socket:chademo:current",
- "description": "Layer 'Charging stations' shows socket:chademo:current=120 A with a fixed text, namely 'Chademo outputs at most 120 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
- "value": "120 A"
+ "description": "Layer 'Charging stations' shows socket:chademo:current=120 with a fixed text, namely 'Chademo outputs at most 120 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
+ "value": "120"
},
{
"key": "socket:chademo:output",
@@ -401,7 +401,7 @@
},
{
"key": "socket:chademo:output",
- "description": "Layer 'Charging stations' shows socket:chademo:output=50 kW with a fixed text, namely 'Chademo outputs at most 50 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
+ "description": "Layer 'Charging stations' shows socket:chademo:output=50 kW with a fixed text, namely 'Chademo outputs at most 50 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
"value": "50 kW"
},
{
@@ -414,13 +414,13 @@
},
{
"key": "socket:type1_cable:voltage",
- "description": "Layer 'Charging stations' shows socket:type1_cable:voltage=200 V with a fixed text, namely 'Type 1 with cable (J1772) outputs 200 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
- "value": "200 V"
+ "description": "Layer 'Charging stations' shows socket:type1_cable:voltage=200 with a fixed text, namely 'Type 1 with cable (J1772) outputs 200 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "value": "200"
},
{
"key": "socket:type1_cable:voltage",
- "description": "Layer 'Charging stations' shows socket:type1_cable:voltage=240 V with a fixed text, namely 'Type 1 with cable (J1772) outputs 240 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
- "value": "240 V"
+ "description": "Layer 'Charging stations' shows socket:type1_cable:voltage=240 with a fixed text, namely 'Type 1 with cable (J1772) outputs 240 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "value": "240"
},
{
"key": "socket:type1_cable:current",
@@ -428,8 +428,8 @@
},
{
"key": "socket:type1_cable:current",
- "description": "Layer 'Charging stations' shows socket:type1_cable:current=32 A with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
- "value": "32 A"
+ "description": "Layer 'Charging stations' shows socket:type1_cable:current=32 with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "value": "32"
},
{
"key": "socket:type1_cable:output",
@@ -437,12 +437,12 @@
},
{
"key": "socket:type1_cable:output",
- "description": "Layer 'Charging stations' shows socket:type1_cable:output=3.7 kW with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 3.7 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1_cable:output=3.7 kW with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 3.7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
"value": "3.7 kW"
},
{
"key": "socket:type1_cable:output",
- "description": "Layer 'Charging stations' shows socket:type1_cable:output=7 kW with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 7 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1_cable:output=7 kW with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
"value": "7 kW"
},
{
@@ -455,13 +455,13 @@
},
{
"key": "socket:type1:voltage",
- "description": "Layer 'Charging stations' shows socket:type1:voltage=200 V with a fixed text, namely 'Type 1 without cable (J1772) outputs 200 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
- "value": "200 V"
+ "description": "Layer 'Charging stations' shows socket:type1:voltage=200 with a fixed text, namely 'Type 1 without cable (J1772) outputs 200 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "value": "200"
},
{
"key": "socket:type1:voltage",
- "description": "Layer 'Charging stations' shows socket:type1:voltage=240 V with a fixed text, namely 'Type 1 without cable (J1772) outputs 240 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
- "value": "240 V"
+ "description": "Layer 'Charging stations' shows socket:type1:voltage=240 with a fixed text, namely 'Type 1 without cable (J1772) outputs 240 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "value": "240"
},
{
"key": "socket:type1:current",
@@ -469,8 +469,8 @@
},
{
"key": "socket:type1:current",
- "description": "Layer 'Charging stations' shows socket:type1:current=32 A with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
- "value": "32 A"
+ "description": "Layer 'Charging stations' shows socket:type1:current=32 with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "value": "32"
},
{
"key": "socket:type1:output",
@@ -478,22 +478,22 @@
},
{
"key": "socket:type1:output",
- "description": "Layer 'Charging stations' shows socket:type1:output=3.7 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 3.7 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1:output=3.7 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 3.7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
"value": "3.7 kW"
},
{
"key": "socket:type1:output",
- "description": "Layer 'Charging stations' shows socket:type1:output=6.6 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 6.6 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1:output=6.6 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 6.6 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
"value": "6.6 kW"
},
{
"key": "socket:type1:output",
- "description": "Layer 'Charging stations' shows socket:type1:output=7 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 7 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1:output=7 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
"value": "7 kW"
},
{
"key": "socket:type1:output",
- "description": "Layer 'Charging stations' shows socket:type1:output=7.2 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 7.2 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1:output=7.2 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 7.2 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
"value": "7.2 kW"
},
{
@@ -506,13 +506,13 @@
},
{
"key": "socket:type1_combo:voltage",
- "description": "Layer 'Charging stations' shows socket:type1_combo:voltage=400 V with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
- "value": "400 V"
+ "description": "Layer 'Charging stations' shows socket:type1_combo:voltage=400 with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "400"
},
{
"key": "socket:type1_combo:voltage",
- "description": "Layer 'Charging stations' shows socket:type1_combo:voltage=1000 V with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs 1000 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
- "value": "1000 V"
+ "description": "Layer 'Charging stations' shows socket:type1_combo:voltage=1000 with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs 1000 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "1000"
},
{
"key": "socket:type1_combo:current",
@@ -520,13 +520,13 @@
},
{
"key": "socket:type1_combo:current",
- "description": "Layer 'Charging stations' shows socket:type1_combo:current=50 A with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 50 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
- "value": "50 A"
+ "description": "Layer 'Charging stations' shows socket:type1_combo:current=50 with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 50 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "50"
},
{
"key": "socket:type1_combo:current",
- "description": "Layer 'Charging stations' shows socket:type1_combo:current=125 A with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
- "value": "125 A"
+ "description": "Layer 'Charging stations' shows socket:type1_combo:current=125 with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "125"
},
{
"key": "socket:type1_combo:output",
@@ -534,22 +534,22 @@
},
{
"key": "socket:type1_combo:output",
- "description": "Layer 'Charging stations' shows socket:type1_combo:output=50 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 50 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1_combo:output=50 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 50 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
"value": "50 kW"
},
{
"key": "socket:type1_combo:output",
- "description": "Layer 'Charging stations' shows socket:type1_combo:output=62.5 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 62.5 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1_combo:output=62.5 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 62.5 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
"value": "62.5 kW"
},
{
"key": "socket:type1_combo:output",
- "description": "Layer 'Charging stations' shows socket:type1_combo:output=150 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 150 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1_combo:output=150 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 150 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
"value": "150 kW"
},
{
"key": "socket:type1_combo:output",
- "description": "Layer 'Charging stations' shows socket:type1_combo:output=350 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 350 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1_combo:output=350 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 350 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
"value": "350 kW"
},
{
@@ -562,8 +562,8 @@
},
{
"key": "socket:tesla_supercharger:voltage",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger:voltage=480 V with a fixed text, namely 'Tesla Supercharger outputs 480 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
- "value": "480 V"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger:voltage=480 with a fixed text, namely 'Tesla Supercharger outputs 480 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "value": "480"
},
{
"key": "socket:tesla_supercharger:current",
@@ -571,13 +571,13 @@
},
{
"key": "socket:tesla_supercharger:current",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger:current=125 A with a fixed text, namely 'Tesla Supercharger outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
- "value": "125 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger:current=125 with a fixed text, namely 'Tesla Supercharger outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "value": "125"
},
{
"key": "socket:tesla_supercharger:current",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger:current=350 A with a fixed text, namely 'Tesla Supercharger outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
- "value": "350 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger:current=350 with a fixed text, namely 'Tesla Supercharger outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "value": "350"
},
{
"key": "socket:tesla_supercharger:output",
@@ -585,17 +585,17 @@
},
{
"key": "socket:tesla_supercharger:output",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger:output=120 kW with a fixed text, namely 'Tesla Supercharger outputs at most 120 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger:output=120 kW with a fixed text, namely 'Tesla Supercharger outputs at most 120 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
"value": "120 kW"
},
{
"key": "socket:tesla_supercharger:output",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger:output=150 kW with a fixed text, namely 'Tesla Supercharger outputs at most 150 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger:output=150 kW with a fixed text, namely 'Tesla Supercharger outputs at most 150 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
"value": "150 kW"
},
{
"key": "socket:tesla_supercharger:output",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger:output=250 kW with a fixed text, namely 'Tesla Supercharger outputs at most 250 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger:output=250 kW with a fixed text, namely 'Tesla Supercharger outputs at most 250 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
"value": "250 kW"
},
{
@@ -608,13 +608,13 @@
},
{
"key": "socket:type2:voltage",
- "description": "Layer 'Charging stations' shows socket:type2:voltage=230 V with a fixed text, namely 'Type 2 (mennekes) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:type2:voltage=230 with a fixed text, namely 'Type 2 (mennekes) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "value": "230"
},
{
"key": "socket:type2:voltage",
- "description": "Layer 'Charging stations' shows socket:type2:voltage=400 V with a fixed text, namely 'Type 2 (mennekes) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)",
- "value": "400 V"
+ "description": "Layer 'Charging stations' shows socket:type2:voltage=400 with a fixed text, namely 'Type 2 (mennekes) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "value": "400"
},
{
"key": "socket:type2:current",
@@ -622,13 +622,13 @@
},
{
"key": "socket:type2:current",
- "description": "Layer 'Charging stations' shows socket:type2:current=16 A with a fixed text, namely 'Type 2 (mennekes) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)",
- "value": "16 A"
+ "description": "Layer 'Charging stations' shows socket:type2:current=16 with a fixed text, namely 'Type 2 (mennekes) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "value": "16"
},
{
"key": "socket:type2:current",
- "description": "Layer 'Charging stations' shows socket:type2:current=32 A with a fixed text, namely 'Type 2 (mennekes) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)",
- "value": "32 A"
+ "description": "Layer 'Charging stations' shows socket:type2:current=32 with a fixed text, namely 'Type 2 (mennekes) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "value": "32"
},
{
"key": "socket:type2:output",
@@ -636,12 +636,12 @@
},
{
"key": "socket:type2:output",
- "description": "Layer 'Charging stations' shows socket:type2:output=11 kW with a fixed text, namely 'Type 2 (mennekes) outputs at most 11 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "description": "Layer 'Charging stations' shows socket:type2:output=11 kW with a fixed text, namely 'Type 2 (mennekes) outputs at most 11 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)",
"value": "11 kW"
},
{
"key": "socket:type2:output",
- "description": "Layer 'Charging stations' shows socket:type2:output=22 kW with a fixed text, namely 'Type 2 (mennekes) outputs at most 22 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "description": "Layer 'Charging stations' shows socket:type2:output=22 kW with a fixed text, namely 'Type 2 (mennekes) outputs at most 22 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)",
"value": "22 kW"
},
{
@@ -654,13 +654,13 @@
},
{
"key": "socket:type2_combo:voltage",
- "description": "Layer 'Charging stations' shows socket:type2_combo:voltage=500 V with a fixed text, namely 'Type 2 CCS (mennekes) outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
- "value": "500 V"
+ "description": "Layer 'Charging stations' shows socket:type2_combo:voltage=500 with a fixed text, namely 'Type 2 CCS (mennekes) outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "value": "500"
},
{
"key": "socket:type2_combo:voltage",
- "description": "Layer 'Charging stations' shows socket:type2_combo:voltage=920 V with a fixed text, namely 'Type 2 CCS (mennekes) outputs 920 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
- "value": "920 V"
+ "description": "Layer 'Charging stations' shows socket:type2_combo:voltage=920 with a fixed text, namely 'Type 2 CCS (mennekes) outputs 920 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "value": "920"
},
{
"key": "socket:type2_combo:current",
@@ -668,13 +668,13 @@
},
{
"key": "socket:type2_combo:current",
- "description": "Layer 'Charging stations' shows socket:type2_combo:current=125 A with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
- "value": "125 A"
+ "description": "Layer 'Charging stations' shows socket:type2_combo:current=125 with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "value": "125"
},
{
"key": "socket:type2_combo:current",
- "description": "Layer 'Charging stations' shows socket:type2_combo:current=350 A with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
- "value": "350 A"
+ "description": "Layer 'Charging stations' shows socket:type2_combo:current=350 with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "value": "350"
},
{
"key": "socket:type2_combo:output",
@@ -682,7 +682,7 @@
},
{
"key": "socket:type2_combo:output",
- "description": "Layer 'Charging stations' shows socket:type2_combo:output=50 kW with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 50 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "description": "Layer 'Charging stations' shows socket:type2_combo:output=50 kW with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 50 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
"value": "50 kW"
},
{
@@ -695,13 +695,13 @@
},
{
"key": "socket:type2_cable:voltage",
- "description": "Layer 'Charging stations' shows socket:type2_cable:voltage=230 V with a fixed text, namely 'Type 2 with cable (mennekes) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:type2_cable:voltage=230 with a fixed text, namely 'Type 2 with cable (mennekes) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "value": "230"
},
{
"key": "socket:type2_cable:voltage",
- "description": "Layer 'Charging stations' shows socket:type2_cable:voltage=400 V with a fixed text, namely 'Type 2 with cable (mennekes) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
- "value": "400 V"
+ "description": "Layer 'Charging stations' shows socket:type2_cable:voltage=400 with a fixed text, namely 'Type 2 with cable (mennekes) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "value": "400"
},
{
"key": "socket:type2_cable:current",
@@ -709,13 +709,13 @@
},
{
"key": "socket:type2_cable:current",
- "description": "Layer 'Charging stations' shows socket:type2_cable:current=16 A with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
- "value": "16 A"
+ "description": "Layer 'Charging stations' shows socket:type2_cable:current=16 with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "value": "16"
},
{
"key": "socket:type2_cable:current",
- "description": "Layer 'Charging stations' shows socket:type2_cable:current=32 A with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
- "value": "32 A"
+ "description": "Layer 'Charging stations' shows socket:type2_cable:current=32 with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "value": "32"
},
{
"key": "socket:type2_cable:output",
@@ -723,12 +723,12 @@
},
{
"key": "socket:type2_cable:output",
- "description": "Layer 'Charging stations' shows socket:type2_cable:output=11 kW with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 11 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "description": "Layer 'Charging stations' shows socket:type2_cable:output=11 kW with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 11 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
"value": "11 kW"
},
{
"key": "socket:type2_cable:output",
- "description": "Layer 'Charging stations' shows socket:type2_cable:output=22 kW with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 22 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "description": "Layer 'Charging stations' shows socket:type2_cable:output=22 kW with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 22 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
"value": "22 kW"
},
{
@@ -741,13 +741,13 @@
},
{
"key": "socket:tesla_supercharger_ccs:voltage",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:voltage=500 V with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
- "value": "500 V"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:voltage=500 with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "value": "500"
},
{
"key": "socket:tesla_supercharger_ccs:voltage",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:voltage=920 V with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs 920 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
- "value": "920 V"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:voltage=920 with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs 920 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "value": "920"
},
{
"key": "socket:tesla_supercharger_ccs:current",
@@ -755,13 +755,13 @@
},
{
"key": "socket:tesla_supercharger_ccs:current",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:current=125 A with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
- "value": "125 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:current=125 with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "value": "125"
},
{
"key": "socket:tesla_supercharger_ccs:current",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:current=350 A with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
- "value": "350 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:current=350 with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "value": "350"
},
{
"key": "socket:tesla_supercharger_ccs:output",
@@ -769,7 +769,7 @@
},
{
"key": "socket:tesla_supercharger_ccs:output",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:output=50 kW with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 50 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:output=50 kW with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 50 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
"value": "50 kW"
},
{
@@ -782,8 +782,8 @@
},
{
"key": "socket:tesla_destination:voltage",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:voltage=480 V with a fixed text, namely 'Tesla Supercharger (destination) outputs 480 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "480 V"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:voltage=480 with a fixed text, namely 'Tesla Supercharger (destination) outputs 480 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "480"
},
{
"key": "socket:tesla_destination:current",
@@ -791,13 +791,13 @@
},
{
"key": "socket:tesla_destination:current",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:current=125 A with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "125 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:current=125 with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "125"
},
{
"key": "socket:tesla_destination:current",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:current=350 A with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "350 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:current=350 with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "350"
},
{
"key": "socket:tesla_destination:output",
@@ -805,17 +805,17 @@
},
{
"key": "socket:tesla_destination:output",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:output=120 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 120 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:output=120 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 120 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
"value": "120 kW"
},
{
"key": "socket:tesla_destination:output",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:output=150 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 150 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:output=150 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 150 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
"value": "150 kW"
},
{
"key": "socket:tesla_destination:output",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:output=250 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 250 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:output=250 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 250 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
"value": "250 kW"
},
{
@@ -828,13 +828,13 @@
},
{
"key": "socket:tesla_destination:voltage",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:voltage=230 V with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:voltage=230 with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "230"
},
{
"key": "socket:tesla_destination:voltage",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:voltage=400 V with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "400 V"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:voltage=400 with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "400"
},
{
"key": "socket:tesla_destination:current",
@@ -842,13 +842,13 @@
},
{
"key": "socket:tesla_destination:current",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:current=16 A with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "16 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:current=16 with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "16"
},
{
"key": "socket:tesla_destination:current",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:current=32 A with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "32 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:current=32 with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "32"
},
{
"key": "socket:tesla_destination:output",
@@ -856,12 +856,12 @@
},
{
"key": "socket:tesla_destination:output",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:output=11 kW with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 11 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:output=11 kW with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 11 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
"value": "11 kW"
},
{
"key": "socket:tesla_destination:output",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:output=22 kW with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 22 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:output=22 kW with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 22 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
"value": "22 kW"
},
{
@@ -874,8 +874,8 @@
},
{
"key": "socket:USB-A:voltage",
- "description": "Layer 'Charging stations' shows socket:USB-A:voltage=5 V with a fixed text, namely 'USB to charge phones and small electronics outputs 5 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
- "value": "5 V"
+ "description": "Layer 'Charging stations' shows socket:USB-A:voltage=5 with a fixed text, namely 'USB to charge phones and small electronics outputs 5 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "value": "5"
},
{
"key": "socket:USB-A:current",
@@ -883,13 +883,13 @@
},
{
"key": "socket:USB-A:current",
- "description": "Layer 'Charging stations' shows socket:USB-A:current=1 A with a fixed text, namely 'USB to charge phones and small electronics outputs at most 1 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
- "value": "1 A"
+ "description": "Layer 'Charging stations' shows socket:USB-A:current=1 with a fixed text, namely 'USB to charge phones and small electronics outputs at most 1 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "value": "1"
},
{
"key": "socket:USB-A:current",
- "description": "Layer 'Charging stations' shows socket:USB-A:current=2 A with a fixed text, namely 'USB to charge phones and small electronics outputs at most 2 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
- "value": "2 A"
+ "description": "Layer 'Charging stations' shows socket:USB-A:current=2 with a fixed text, namely 'USB to charge phones and small electronics outputs at most 2 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "value": "2"
},
{
"key": "socket:USB-A:output",
@@ -897,12 +897,12 @@
},
{
"key": "socket:USB-A:output",
- "description": "Layer 'Charging stations' shows socket:USB-A:output=5W with a fixed text, namely 'USB to charge phones and small electronics outputs at most 5W A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "description": "Layer 'Charging stations' shows socket:USB-A:output=5W with a fixed text, namely 'USB to charge phones and small electronics outputs at most 5W' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
"value": "5W"
},
{
"key": "socket:USB-A:output",
- "description": "Layer 'Charging stations' shows socket:USB-A:output=10W with a fixed text, namely 'USB to charge phones and small electronics outputs at most 10W A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "description": "Layer 'Charging stations' shows socket:USB-A:output=10W with a fixed text, namely 'USB to charge phones and small electronics outputs at most 10W' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
"value": "10W"
},
{
@@ -947,8 +947,8 @@
},
{
"key": "socket:bs1363:voltage",
- "description": "Layer 'Charging stations' shows socket:bs1363:voltage=230 V with a fixed text, namely 'BS1363 (Type G) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:bs1363:voltage=230 with a fixed text, namely 'BS1363 (Type G) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
+ "value": "230"
},
{
"key": "socket:bs1363:current",
@@ -956,8 +956,8 @@
},
{
"key": "socket:bs1363:current",
- "description": "Layer 'Charging stations' shows socket:bs1363:current=13 A with a fixed text, namely 'BS1363 (Type G) outputs at most 13 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
- "value": "13 A"
+ "description": "Layer 'Charging stations' shows socket:bs1363:current=13 with a fixed text, namely 'BS1363 (Type G) outputs at most 13 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
+ "value": "13"
},
{
"key": "socket:bs1363:output",
@@ -965,7 +965,7 @@
},
{
"key": "socket:bs1363:output",
- "description": "Layer 'Charging stations' shows socket:bs1363:output=3kW with a fixed text, namely 'BS1363 (Type G) outputs at most 3kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
+ "description": "Layer 'Charging stations' shows socket:bs1363:output=3kW with a fixed text, namely 'BS1363 (Type G) outputs at most 3kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
"value": "3kW"
},
{
@@ -978,8 +978,8 @@
},
{
"key": "socket:nema5_15:voltage",
- "description": "Layer 'Charging stations' shows socket:nema5_15:voltage=120 V with a fixed text, namely 'NEMA 5-15 (Type B) outputs 120 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
- "value": "120 V"
+ "description": "Layer 'Charging stations' shows socket:nema5_15:voltage=120 with a fixed text, namely 'NEMA 5-15 (Type B) outputs 120 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
+ "value": "120"
},
{
"key": "socket:nema5_15:current",
@@ -987,8 +987,8 @@
},
{
"key": "socket:nema5_15:current",
- "description": "Layer 'Charging stations' shows socket:nema5_15:current=15 A with a fixed text, namely 'NEMA 5-15 (Type B) outputs at most 15 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
- "value": "15 A"
+ "description": "Layer 'Charging stations' shows socket:nema5_15:current=15 with a fixed text, namely 'NEMA 5-15 (Type B) outputs at most 15 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
+ "value": "15"
},
{
"key": "socket:nema5_15:output",
@@ -996,7 +996,7 @@
},
{
"key": "socket:nema5_15:output",
- "description": "Layer 'Charging stations' shows socket:nema5_15:output=1.8 kW with a fixed text, namely 'NEMA 5-15 (Type B) outputs at most 1.8 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
+ "description": "Layer 'Charging stations' shows socket:nema5_15:output=1.8 kW with a fixed text, namely 'NEMA 5-15 (Type B) outputs at most 1.8 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
"value": "1.8 kW"
},
{
@@ -1009,8 +1009,8 @@
},
{
"key": "socket:sev1011_t23:voltage",
- "description": "Layer 'Charging stations' shows socket:sev1011_t23:voltage=230 V with a fixed text, namely 'SEV 1011 T23 (Type J) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:sev1011_t23:voltage=230 with a fixed text, namely 'SEV 1011 T23 (Type J) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
+ "value": "230"
},
{
"key": "socket:sev1011_t23:current",
@@ -1018,8 +1018,8 @@
},
{
"key": "socket:sev1011_t23:current",
- "description": "Layer 'Charging stations' shows socket:sev1011_t23:current=16 A with a fixed text, namely 'SEV 1011 T23 (Type J) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
- "value": "16 A"
+ "description": "Layer 'Charging stations' shows socket:sev1011_t23:current=16 with a fixed text, namely 'SEV 1011 T23 (Type J) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
+ "value": "16"
},
{
"key": "socket:sev1011_t23:output",
@@ -1027,7 +1027,7 @@
},
{
"key": "socket:sev1011_t23:output",
- "description": "Layer 'Charging stations' shows socket:sev1011_t23:output=3.7 kW with a fixed text, namely 'SEV 1011 T23 (Type J) outputs at most 3.7 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
+ "description": "Layer 'Charging stations' shows socket:sev1011_t23:output=3.7 kW with a fixed text, namely 'SEV 1011 T23 (Type J) outputs at most 3.7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
"value": "3.7 kW"
},
{
@@ -1040,8 +1040,8 @@
},
{
"key": "socket:as3112:voltage",
- "description": "Layer 'Charging stations' shows socket:as3112:voltage=230 V with a fixed text, namely 'AS3112 (Type I) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:as3112:voltage=230 with a fixed text, namely 'AS3112 (Type I) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
+ "value": "230"
},
{
"key": "socket:as3112:current",
@@ -1049,8 +1049,8 @@
},
{
"key": "socket:as3112:current",
- "description": "Layer 'Charging stations' shows socket:as3112:current=10 A with a fixed text, namely 'AS3112 (Type I) outputs at most 10 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
- "value": "10 A"
+ "description": "Layer 'Charging stations' shows socket:as3112:current=10 with a fixed text, namely 'AS3112 (Type I) outputs at most 10 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
+ "value": "10"
},
{
"key": "socket:as3112:output",
@@ -1058,7 +1058,7 @@
},
{
"key": "socket:as3112:output",
- "description": "Layer 'Charging stations' shows socket:as3112:output=2.3 kW with a fixed text, namely 'AS3112 (Type I) outputs at most 2.3 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
+ "description": "Layer 'Charging stations' shows socket:as3112:output=2.3 kW with a fixed text, namely 'AS3112 (Type I) outputs at most 2.3 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
"value": "2.3 kW"
},
{
@@ -1071,8 +1071,8 @@
},
{
"key": "socket:nema_5_20:voltage",
- "description": "Layer 'Charging stations' shows socket:nema_5_20:voltage=120 V with a fixed text, namely 'NEMA 5-20 (Type B) outputs 120 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
- "value": "120 V"
+ "description": "Layer 'Charging stations' shows socket:nema_5_20:voltage=120 with a fixed text, namely 'NEMA 5-20 (Type B) outputs 120 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
+ "value": "120"
},
{
"key": "socket:nema_5_20:current",
@@ -1080,8 +1080,8 @@
},
{
"key": "socket:nema_5_20:current",
- "description": "Layer 'Charging stations' shows socket:nema_5_20:current=20 A with a fixed text, namely 'NEMA 5-20 (Type B) outputs at most 20 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
- "value": "20 A"
+ "description": "Layer 'Charging stations' shows socket:nema_5_20:current=20 with a fixed text, namely 'NEMA 5-20 (Type B) outputs at most 20 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
+ "value": "20"
},
{
"key": "socket:nema_5_20:output",
@@ -1089,7 +1089,7 @@
},
{
"key": "socket:nema_5_20:output",
- "description": "Layer 'Charging stations' shows socket:nema_5_20:output=2.4 kW with a fixed text, namely 'NEMA 5-20 (Type B) outputs at most 2.4 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
+ "description": "Layer 'Charging stations' shows socket:nema_5_20:output=2.4 kW with a fixed text, namely 'NEMA 5-20 (Type B) outputs at most 2.4 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
"value": "2.4 kW"
},
{
@@ -1485,6 +1485,1018 @@
"key": "parking:fee",
"description": "Layer 'Charging stations' shows parking:fee=yes with a fixed text, namely 'An additional parking fee should be paid while charging' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if motor_vehicle=yes | hgv=yes | bus=yes | bicycle=no | bicycle=)",
"value": "yes"
+ },
+ {
+ "key": "man_made",
+ "description": "The MapComplete theme Charging stations has a layer Charge points showing features with this tag",
+ "value": "charge_point"
+ },
+ {
+ "key": "id",
+ "description": "Layer 'Charge points' shows id~.+ with a fixed text, namely 'You just created this element! Thanks for sharing this info with the world and helping people worldwide.' (in the mapcomplete.org theme 'Charging stations') (This is only shown if _backend~.+ & _last_edit:passed_time<300 & (_version_number= | _version_number=1))"
+ },
+ {
+ "key": "image",
+ "description": "The layer 'Charge points allows to upload images and adds them under the 'panoramax'-tag (and panoramax:0, panoramax:1, ... for multiple images). Furthermore, this layer shows images based on the keys panoramax, image, wikidata, wikipedia, wikimedia_commons and mapillary"
+ },
+ {
+ "key": "panoramax",
+ "description": "The layer 'Charge points allows to upload images and adds them under the 'panoramax'-tag (and panoramax:0, panoramax:1, ... for multiple images). Furthermore, this layer shows images based on the keys panoramax, image, wikidata, wikipedia, wikimedia_commons and mapillary"
+ },
+ {
+ "key": "mapillary",
+ "description": "The layer 'Charge points allows to upload images and adds them under the 'panoramax'-tag (and panoramax:0, panoramax:1, ... for multiple images). Furthermore, this layer shows images based on the keys panoramax, image, wikidata, wikipedia, wikimedia_commons and mapillary"
+ },
+ {
+ "key": "wikidata",
+ "description": "The layer 'Charge points allows to upload images and adds them under the 'panoramax'-tag (and panoramax:0, panoramax:1, ... for multiple images). Furthermore, this layer shows images based on the keys panoramax, image, wikidata, wikipedia, wikimedia_commons and mapillary"
+ },
+ {
+ "key": "wikipedia",
+ "description": "The layer 'Charge points allows to upload images and adds them under the 'panoramax'-tag (and panoramax:0, panoramax:1, ... for multiple images). Furthermore, this layer shows images based on the keys panoramax, image, wikidata, wikipedia, wikimedia_commons and mapillary"
+ },
+ {
+ "key": "ref",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'ref' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "capacity",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'capacity' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:schuko",
+ "description": "Layer 'Charge points' shows socket:schuko=1 with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F)' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:schuko",
+ "description": "Layer 'Charge points' shows socket:schuko~.+ & socket:schuko!=1 with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F)' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:typee",
+ "description": "Layer 'Charge points' shows socket:typee=1 with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E)' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:typee",
+ "description": "Layer 'Charge points' shows socket:typee~.+ & socket:typee!=1 with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E)' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:chademo",
+ "description": "Layer 'Charge points' shows socket:chademo=1 with a fixed text, namely 'Chademo' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:chademo",
+ "description": "Layer 'Charge points' shows socket:chademo~.+ & socket:chademo!=1 with a fixed text, namely 'Chademo' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:type1_cable",
+ "description": "Layer 'Charge points' shows socket:type1_cable=1 with a fixed text, namely 'Type 1 with cable (J1772)' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:type1_cable",
+ "description": "Layer 'Charge points' shows socket:type1_cable~.+ & socket:type1_cable!=1 with a fixed text, namely 'Type 1 with cable (J1772)' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:type1",
+ "description": "Layer 'Charge points' shows socket:type1=1 with a fixed text, namely 'Type 1 without cable (J1772)' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:type1",
+ "description": "Layer 'Charge points' shows socket:type1~.+ & socket:type1!=1 with a fixed text, namely 'Type 1 without cable (J1772)' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:type1_combo",
+ "description": "Layer 'Charge points' shows socket:type1_combo=1 with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo)' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:type1_combo",
+ "description": "Layer 'Charge points' shows socket:type1_combo~.+ & socket:type1_combo!=1 with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo)' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:tesla_supercharger",
+ "description": "Layer 'Charge points' shows socket:tesla_supercharger=1 with a fixed text, namely 'Tesla Supercharger' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:tesla_supercharger",
+ "description": "Layer 'Charge points' shows socket:tesla_supercharger~.+ & socket:tesla_supercharger!=1 with a fixed text, namely 'Tesla Supercharger' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:type2",
+ "description": "Layer 'Charge points' shows socket:type2=1 with a fixed text, namely 'Type 2 (mennekes)' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:type2",
+ "description": "Layer 'Charge points' shows socket:type2~.+ & socket:type2!=1 with a fixed text, namely 'Type 2 (mennekes)' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:type2_combo",
+ "description": "Layer 'Charge points' shows socket:type2_combo=1 with a fixed text, namely 'Type 2 CCS (mennekes)' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:type2_combo",
+ "description": "Layer 'Charge points' shows socket:type2_combo~.+ & socket:type2_combo!=1 with a fixed text, namely 'Type 2 CCS (mennekes)' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:type2_cable",
+ "description": "Layer 'Charge points' shows socket:type2_cable=1 with a fixed text, namely 'Type 2 with cable (mennekes)' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:type2_cable",
+ "description": "Layer 'Charge points' shows socket:type2_cable~.+ & socket:type2_cable!=1 with a fixed text, namely 'Type 2 with cable (mennekes)' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:tesla_supercharger_ccs",
+ "description": "Layer 'Charge points' shows socket:tesla_supercharger_ccs=1 with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css)' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:tesla_supercharger_ccs",
+ "description": "Layer 'Charge points' shows socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=1 with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css)' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:tesla_destination",
+ "description": "Layer 'Charge points' shows socket:tesla_destination=1 with a fixed text, namely 'Tesla Supercharger (destination)' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:tesla_destination",
+ "description": "Layer 'Charge points' shows socket:tesla_destination~.+ & socket:tesla_destination!=1 & _country=us with a fixed text, namely 'Tesla Supercharger (destination)' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:tesla_destination",
+ "description": "Layer 'Charge points' shows socket:tesla_destination=1 with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla)' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:tesla_destination",
+ "description": "Layer 'Charge points' shows socket:tesla_destination~.+ & socket:tesla_destination!=1 & _country!=us with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla)' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:USB-A",
+ "description": "Layer 'Charge points' shows socket:USB-A=1 with a fixed text, namely 'USB to charge phones and small electronics' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:USB-A",
+ "description": "Layer 'Charge points' shows socket:USB-A~.+ & socket:USB-A!=1 with a fixed text, namely 'USB to charge phones and small electronics' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:bosch_3pin",
+ "description": "Layer 'Charge points' shows socket:bosch_3pin=1 with a fixed text, namely 'Bosch Active Connect with 3 pins and cable' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:bosch_3pin",
+ "description": "Layer 'Charge points' shows socket:bosch_3pin~.+ & socket:bosch_3pin!=1 with a fixed text, namely 'Bosch Active Connect with 3 pins and cable' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:bosch_5pin",
+ "description": "Layer 'Charge points' shows socket:bosch_5pin=1 with a fixed text, namely 'Bosch Active Connect with 5 pins and cable' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:bosch_5pin",
+ "description": "Layer 'Charge points' shows socket:bosch_5pin~.+ & socket:bosch_5pin!=1 with a fixed text, namely 'Bosch Active Connect with 5 pins and cable' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:bs1363",
+ "description": "Layer 'Charge points' shows socket:bs1363=1 with a fixed text, namely 'BS1363 (Type G)' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:bs1363",
+ "description": "Layer 'Charge points' shows socket:bs1363~.+ & socket:bs1363!=1 with a fixed text, namely 'BS1363 (Type G)' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:nema5_15",
+ "description": "Layer 'Charge points' shows socket:nema5_15=1 with a fixed text, namely 'NEMA 5-15 (Type B)' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:nema5_15",
+ "description": "Layer 'Charge points' shows socket:nema5_15~.+ & socket:nema5_15!=1 with a fixed text, namely 'NEMA 5-15 (Type B)' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:sev1011_t23",
+ "description": "Layer 'Charge points' shows socket:sev1011_t23=1 with a fixed text, namely 'SEV 1011 T23 (Type J)' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:sev1011_t23",
+ "description": "Layer 'Charge points' shows socket:sev1011_t23~.+ & socket:sev1011_t23!=1 with a fixed text, namely 'SEV 1011 T23 (Type J)' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:as3112",
+ "description": "Layer 'Charge points' shows socket:as3112=1 with a fixed text, namely 'AS3112 (Type I)' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:as3112",
+ "description": "Layer 'Charge points' shows socket:as3112~.+ & socket:as3112!=1 with a fixed text, namely 'AS3112 (Type I)' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:nema_5_20",
+ "description": "Layer 'Charge points' shows socket:nema_5_20=1 with a fixed text, namely 'NEMA 5-20 (Type B)' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations')",
+ "value": "1"
+ },
+ {
+ "key": "socket:nema_5_20",
+ "description": "Layer 'Charge points' shows socket:nema_5_20~.+ & socket:nema_5_20!=1 with a fixed text, namely 'NEMA 5-20 (Type B)' (in the mapcomplete.org theme 'Charging stations')"
+ },
+ {
+ "key": "socket:schuko",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:schuko' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:schuko~.+ & socket:schuko!=0)"
+ },
+ {
+ "key": "socket:typee",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:typee' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:typee~.+ & socket:typee!=0)"
+ },
+ {
+ "key": "socket:chademo",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:chademo' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:chademo~.+ & socket:chademo!=0)"
+ },
+ {
+ "key": "socket:type1_cable",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type1_cable' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)"
+ },
+ {
+ "key": "socket:type1",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type1' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)"
+ },
+ {
+ "key": "socket:type1_combo",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type1_combo' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)"
+ },
+ {
+ "key": "socket:tesla_supercharger",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:tesla_supercharger' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)"
+ },
+ {
+ "key": "socket:type2",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type2' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)"
+ },
+ {
+ "key": "socket:type2_combo",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type2_combo' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)"
+ },
+ {
+ "key": "socket:type2_cable",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type2_cable' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)"
+ },
+ {
+ "key": "socket:tesla_supercharger_ccs",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:tesla_supercharger_ccs' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)"
+ },
+ {
+ "key": "socket:tesla_destination",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:tesla_destination' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)"
+ },
+ {
+ "key": "socket:tesla_destination",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:tesla_destination' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)"
+ },
+ {
+ "key": "socket:USB-A",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:USB-A' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)"
+ },
+ {
+ "key": "socket:bosch_3pin",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:bosch_3pin' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bosch_3pin~.+ & socket:bosch_3pin!=0)"
+ },
+ {
+ "key": "socket:bosch_5pin",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:bosch_5pin' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bosch_5pin~.+ & socket:bosch_5pin!=0)"
+ },
+ {
+ "key": "socket:bs1363",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:bs1363' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)"
+ },
+ {
+ "key": "socket:nema5_15",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:nema5_15' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)"
+ },
+ {
+ "key": "socket:sev1011_t23",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:sev1011_t23' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)"
+ },
+ {
+ "key": "socket:as3112",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:as3112' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:as3112~.+ & socket:as3112!=0)"
+ },
+ {
+ "key": "socket:nema_5_20",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:nema_5_20' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)"
+ },
+ {
+ "key": "socket:schuko:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:schuko:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:schuko~.+ & socket:schuko!=0)"
+ },
+ {
+ "key": "socket:schuko:voltage",
+ "description": "Layer 'Charge points' shows socket:schuko:voltage=230 with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
+ "value": "230"
+ },
+ {
+ "key": "socket:schuko:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:schuko:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:schuko~.+ & socket:schuko!=0)"
+ },
+ {
+ "key": "socket:schuko:current",
+ "description": "Layer 'Charge points' shows socket:schuko:current=16 with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
+ "value": "16"
+ },
+ {
+ "key": "socket:schuko:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:schuko:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:schuko~.+ & socket:schuko!=0)"
+ },
+ {
+ "key": "socket:schuko:output",
+ "description": "Layer 'Charge points' shows socket:schuko:output=3.6 kW with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 3.6 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
+ "value": "3.6 kW"
+ },
+ {
+ "key": "socket:typee:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:typee:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:typee~.+ & socket:typee!=0)"
+ },
+ {
+ "key": "socket:typee:voltage",
+ "description": "Layer 'Charge points' shows socket:typee:voltage=230 with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:typee~.+ & socket:typee!=0)",
+ "value": "230"
+ },
+ {
+ "key": "socket:typee:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:typee:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:typee~.+ & socket:typee!=0)"
+ },
+ {
+ "key": "socket:typee:current",
+ "description": "Layer 'Charge points' shows socket:typee:current=16 with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:typee~.+ & socket:typee!=0)",
+ "value": "16"
+ },
+ {
+ "key": "socket:typee:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:typee:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:typee~.+ & socket:typee!=0)"
+ },
+ {
+ "key": "socket:typee:output",
+ "description": "Layer 'Charge points' shows socket:typee:output=3 kW with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 3 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:typee~.+ & socket:typee!=0)",
+ "value": "3 kW"
+ },
+ {
+ "key": "socket:typee:output",
+ "description": "Layer 'Charge points' shows socket:typee:output=22 kW with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 22 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:typee~.+ & socket:typee!=0)",
+ "value": "22 kW"
+ },
+ {
+ "key": "socket:chademo:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:chademo:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:chademo~.+ & socket:chademo!=0)"
+ },
+ {
+ "key": "socket:chademo:voltage",
+ "description": "Layer 'Charge points' shows socket:chademo:voltage=500 with a fixed text, namely 'Chademo outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
+ "value": "500"
+ },
+ {
+ "key": "socket:chademo:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:chademo:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:chademo~.+ & socket:chademo!=0)"
+ },
+ {
+ "key": "socket:chademo:current",
+ "description": "Layer 'Charge points' shows socket:chademo:current=120 with a fixed text, namely 'Chademo outputs at most 120 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
+ "value": "120"
+ },
+ {
+ "key": "socket:chademo:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:chademo:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:chademo~.+ & socket:chademo!=0)"
+ },
+ {
+ "key": "socket:chademo:output",
+ "description": "Layer 'Charge points' shows socket:chademo:output=50 kW with a fixed text, namely 'Chademo outputs at most 50 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
+ "value": "50 kW"
+ },
+ {
+ "key": "socket:type1_cable:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type1_cable:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)"
+ },
+ {
+ "key": "socket:type1_cable:voltage",
+ "description": "Layer 'Charge points' shows socket:type1_cable:voltage=200 with a fixed text, namely 'Type 1 with cable (J1772) outputs 200 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "value": "200"
+ },
+ {
+ "key": "socket:type1_cable:voltage",
+ "description": "Layer 'Charge points' shows socket:type1_cable:voltage=240 with a fixed text, namely 'Type 1 with cable (J1772) outputs 240 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "value": "240"
+ },
+ {
+ "key": "socket:type1_cable:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type1_cable:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)"
+ },
+ {
+ "key": "socket:type1_cable:current",
+ "description": "Layer 'Charge points' shows socket:type1_cable:current=32 with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "value": "32"
+ },
+ {
+ "key": "socket:type1_cable:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type1_cable:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)"
+ },
+ {
+ "key": "socket:type1_cable:output",
+ "description": "Layer 'Charge points' shows socket:type1_cable:output=3.7 kW with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 3.7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "value": "3.7 kW"
+ },
+ {
+ "key": "socket:type1_cable:output",
+ "description": "Layer 'Charge points' shows socket:type1_cable:output=7 kW with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "value": "7 kW"
+ },
+ {
+ "key": "socket:type1:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type1:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)"
+ },
+ {
+ "key": "socket:type1:voltage",
+ "description": "Layer 'Charge points' shows socket:type1:voltage=200 with a fixed text, namely 'Type 1 without cable (J1772) outputs 200 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "value": "200"
+ },
+ {
+ "key": "socket:type1:voltage",
+ "description": "Layer 'Charge points' shows socket:type1:voltage=240 with a fixed text, namely 'Type 1 without cable (J1772) outputs 240 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "value": "240"
+ },
+ {
+ "key": "socket:type1:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type1:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)"
+ },
+ {
+ "key": "socket:type1:current",
+ "description": "Layer 'Charge points' shows socket:type1:current=32 with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "value": "32"
+ },
+ {
+ "key": "socket:type1:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type1:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)"
+ },
+ {
+ "key": "socket:type1:output",
+ "description": "Layer 'Charge points' shows socket:type1:output=3.7 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 3.7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "value": "3.7 kW"
+ },
+ {
+ "key": "socket:type1:output",
+ "description": "Layer 'Charge points' shows socket:type1:output=6.6 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 6.6 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "value": "6.6 kW"
+ },
+ {
+ "key": "socket:type1:output",
+ "description": "Layer 'Charge points' shows socket:type1:output=7 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "value": "7 kW"
+ },
+ {
+ "key": "socket:type1:output",
+ "description": "Layer 'Charge points' shows socket:type1:output=7.2 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 7.2 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "value": "7.2 kW"
+ },
+ {
+ "key": "socket:type1_combo:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type1_combo:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)"
+ },
+ {
+ "key": "socket:type1_combo:voltage",
+ "description": "Layer 'Charge points' shows socket:type1_combo:voltage=400 with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "400"
+ },
+ {
+ "key": "socket:type1_combo:voltage",
+ "description": "Layer 'Charge points' shows socket:type1_combo:voltage=1000 with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs 1000 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "1000"
+ },
+ {
+ "key": "socket:type1_combo:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type1_combo:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)"
+ },
+ {
+ "key": "socket:type1_combo:current",
+ "description": "Layer 'Charge points' shows socket:type1_combo:current=50 with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 50 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "50"
+ },
+ {
+ "key": "socket:type1_combo:current",
+ "description": "Layer 'Charge points' shows socket:type1_combo:current=125 with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "125"
+ },
+ {
+ "key": "socket:type1_combo:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type1_combo:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)"
+ },
+ {
+ "key": "socket:type1_combo:output",
+ "description": "Layer 'Charge points' shows socket:type1_combo:output=50 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 50 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "50 kW"
+ },
+ {
+ "key": "socket:type1_combo:output",
+ "description": "Layer 'Charge points' shows socket:type1_combo:output=62.5 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 62.5 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "62.5 kW"
+ },
+ {
+ "key": "socket:type1_combo:output",
+ "description": "Layer 'Charge points' shows socket:type1_combo:output=150 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 150 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "150 kW"
+ },
+ {
+ "key": "socket:type1_combo:output",
+ "description": "Layer 'Charge points' shows socket:type1_combo:output=350 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 350 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "350 kW"
+ },
+ {
+ "key": "socket:tesla_supercharger:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:tesla_supercharger:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)"
+ },
+ {
+ "key": "socket:tesla_supercharger:voltage",
+ "description": "Layer 'Charge points' shows socket:tesla_supercharger:voltage=480 with a fixed text, namely 'Tesla Supercharger outputs 480 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "value": "480"
+ },
+ {
+ "key": "socket:tesla_supercharger:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:tesla_supercharger:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)"
+ },
+ {
+ "key": "socket:tesla_supercharger:current",
+ "description": "Layer 'Charge points' shows socket:tesla_supercharger:current=125 with a fixed text, namely 'Tesla Supercharger outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "value": "125"
+ },
+ {
+ "key": "socket:tesla_supercharger:current",
+ "description": "Layer 'Charge points' shows socket:tesla_supercharger:current=350 with a fixed text, namely 'Tesla Supercharger outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "value": "350"
+ },
+ {
+ "key": "socket:tesla_supercharger:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:tesla_supercharger:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)"
+ },
+ {
+ "key": "socket:tesla_supercharger:output",
+ "description": "Layer 'Charge points' shows socket:tesla_supercharger:output=120 kW with a fixed text, namely 'Tesla Supercharger outputs at most 120 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "value": "120 kW"
+ },
+ {
+ "key": "socket:tesla_supercharger:output",
+ "description": "Layer 'Charge points' shows socket:tesla_supercharger:output=150 kW with a fixed text, namely 'Tesla Supercharger outputs at most 150 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "value": "150 kW"
+ },
+ {
+ "key": "socket:tesla_supercharger:output",
+ "description": "Layer 'Charge points' shows socket:tesla_supercharger:output=250 kW with a fixed text, namely 'Tesla Supercharger outputs at most 250 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "value": "250 kW"
+ },
+ {
+ "key": "socket:type2:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type2:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)"
+ },
+ {
+ "key": "socket:type2:voltage",
+ "description": "Layer 'Charge points' shows socket:type2:voltage=230 with a fixed text, namely 'Type 2 (mennekes) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "value": "230"
+ },
+ {
+ "key": "socket:type2:voltage",
+ "description": "Layer 'Charge points' shows socket:type2:voltage=400 with a fixed text, namely 'Type 2 (mennekes) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "value": "400"
+ },
+ {
+ "key": "socket:type2:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type2:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)"
+ },
+ {
+ "key": "socket:type2:current",
+ "description": "Layer 'Charge points' shows socket:type2:current=16 with a fixed text, namely 'Type 2 (mennekes) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "value": "16"
+ },
+ {
+ "key": "socket:type2:current",
+ "description": "Layer 'Charge points' shows socket:type2:current=32 with a fixed text, namely 'Type 2 (mennekes) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "value": "32"
+ },
+ {
+ "key": "socket:type2:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type2:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)"
+ },
+ {
+ "key": "socket:type2:output",
+ "description": "Layer 'Charge points' shows socket:type2:output=11 kW with a fixed text, namely 'Type 2 (mennekes) outputs at most 11 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "value": "11 kW"
+ },
+ {
+ "key": "socket:type2:output",
+ "description": "Layer 'Charge points' shows socket:type2:output=22 kW with a fixed text, namely 'Type 2 (mennekes) outputs at most 22 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "value": "22 kW"
+ },
+ {
+ "key": "socket:type2_combo:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type2_combo:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)"
+ },
+ {
+ "key": "socket:type2_combo:voltage",
+ "description": "Layer 'Charge points' shows socket:type2_combo:voltage=500 with a fixed text, namely 'Type 2 CCS (mennekes) outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "value": "500"
+ },
+ {
+ "key": "socket:type2_combo:voltage",
+ "description": "Layer 'Charge points' shows socket:type2_combo:voltage=920 with a fixed text, namely 'Type 2 CCS (mennekes) outputs 920 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "value": "920"
+ },
+ {
+ "key": "socket:type2_combo:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type2_combo:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)"
+ },
+ {
+ "key": "socket:type2_combo:current",
+ "description": "Layer 'Charge points' shows socket:type2_combo:current=125 with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "value": "125"
+ },
+ {
+ "key": "socket:type2_combo:current",
+ "description": "Layer 'Charge points' shows socket:type2_combo:current=350 with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "value": "350"
+ },
+ {
+ "key": "socket:type2_combo:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type2_combo:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)"
+ },
+ {
+ "key": "socket:type2_combo:output",
+ "description": "Layer 'Charge points' shows socket:type2_combo:output=50 kW with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 50 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "value": "50 kW"
+ },
+ {
+ "key": "socket:type2_cable:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type2_cable:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)"
+ },
+ {
+ "key": "socket:type2_cable:voltage",
+ "description": "Layer 'Charge points' shows socket:type2_cable:voltage=230 with a fixed text, namely 'Type 2 with cable (mennekes) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "value": "230"
+ },
+ {
+ "key": "socket:type2_cable:voltage",
+ "description": "Layer 'Charge points' shows socket:type2_cable:voltage=400 with a fixed text, namely 'Type 2 with cable (mennekes) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "value": "400"
+ },
+ {
+ "key": "socket:type2_cable:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type2_cable:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)"
+ },
+ {
+ "key": "socket:type2_cable:current",
+ "description": "Layer 'Charge points' shows socket:type2_cable:current=16 with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "value": "16"
+ },
+ {
+ "key": "socket:type2_cable:current",
+ "description": "Layer 'Charge points' shows socket:type2_cable:current=32 with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "value": "32"
+ },
+ {
+ "key": "socket:type2_cable:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:type2_cable:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)"
+ },
+ {
+ "key": "socket:type2_cable:output",
+ "description": "Layer 'Charge points' shows socket:type2_cable:output=11 kW with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 11 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "value": "11 kW"
+ },
+ {
+ "key": "socket:type2_cable:output",
+ "description": "Layer 'Charge points' shows socket:type2_cable:output=22 kW with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 22 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "value": "22 kW"
+ },
+ {
+ "key": "socket:tesla_supercharger_ccs:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:tesla_supercharger_ccs:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)"
+ },
+ {
+ "key": "socket:tesla_supercharger_ccs:voltage",
+ "description": "Layer 'Charge points' shows socket:tesla_supercharger_ccs:voltage=500 with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "value": "500"
+ },
+ {
+ "key": "socket:tesla_supercharger_ccs:voltage",
+ "description": "Layer 'Charge points' shows socket:tesla_supercharger_ccs:voltage=920 with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs 920 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "value": "920"
+ },
+ {
+ "key": "socket:tesla_supercharger_ccs:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:tesla_supercharger_ccs:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)"
+ },
+ {
+ "key": "socket:tesla_supercharger_ccs:current",
+ "description": "Layer 'Charge points' shows socket:tesla_supercharger_ccs:current=125 with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "value": "125"
+ },
+ {
+ "key": "socket:tesla_supercharger_ccs:current",
+ "description": "Layer 'Charge points' shows socket:tesla_supercharger_ccs:current=350 with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "value": "350"
+ },
+ {
+ "key": "socket:tesla_supercharger_ccs:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:tesla_supercharger_ccs:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)"
+ },
+ {
+ "key": "socket:tesla_supercharger_ccs:output",
+ "description": "Layer 'Charge points' shows socket:tesla_supercharger_ccs:output=50 kW with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 50 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "value": "50 kW"
+ },
+ {
+ "key": "socket:tesla_destination:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:tesla_destination:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)"
+ },
+ {
+ "key": "socket:tesla_destination:voltage",
+ "description": "Layer 'Charge points' shows socket:tesla_destination:voltage=480 with a fixed text, namely 'Tesla Supercharger (destination) outputs 480 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "480"
+ },
+ {
+ "key": "socket:tesla_destination:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:tesla_destination:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)"
+ },
+ {
+ "key": "socket:tesla_destination:current",
+ "description": "Layer 'Charge points' shows socket:tesla_destination:current=125 with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "125"
+ },
+ {
+ "key": "socket:tesla_destination:current",
+ "description": "Layer 'Charge points' shows socket:tesla_destination:current=350 with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "350"
+ },
+ {
+ "key": "socket:tesla_destination:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:tesla_destination:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)"
+ },
+ {
+ "key": "socket:tesla_destination:output",
+ "description": "Layer 'Charge points' shows socket:tesla_destination:output=120 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 120 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "120 kW"
+ },
+ {
+ "key": "socket:tesla_destination:output",
+ "description": "Layer 'Charge points' shows socket:tesla_destination:output=150 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 150 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "150 kW"
+ },
+ {
+ "key": "socket:tesla_destination:output",
+ "description": "Layer 'Charge points' shows socket:tesla_destination:output=250 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 250 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "250 kW"
+ },
+ {
+ "key": "socket:tesla_destination:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:tesla_destination:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)"
+ },
+ {
+ "key": "socket:tesla_destination:voltage",
+ "description": "Layer 'Charge points' shows socket:tesla_destination:voltage=230 with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "230"
+ },
+ {
+ "key": "socket:tesla_destination:voltage",
+ "description": "Layer 'Charge points' shows socket:tesla_destination:voltage=400 with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "400"
+ },
+ {
+ "key": "socket:tesla_destination:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:tesla_destination:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)"
+ },
+ {
+ "key": "socket:tesla_destination:current",
+ "description": "Layer 'Charge points' shows socket:tesla_destination:current=16 with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "16"
+ },
+ {
+ "key": "socket:tesla_destination:current",
+ "description": "Layer 'Charge points' shows socket:tesla_destination:current=32 with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "32"
+ },
+ {
+ "key": "socket:tesla_destination:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:tesla_destination:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)"
+ },
+ {
+ "key": "socket:tesla_destination:output",
+ "description": "Layer 'Charge points' shows socket:tesla_destination:output=11 kW with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 11 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "11 kW"
+ },
+ {
+ "key": "socket:tesla_destination:output",
+ "description": "Layer 'Charge points' shows socket:tesla_destination:output=22 kW with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 22 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "22 kW"
+ },
+ {
+ "key": "socket:USB-A:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:USB-A:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)"
+ },
+ {
+ "key": "socket:USB-A:voltage",
+ "description": "Layer 'Charge points' shows socket:USB-A:voltage=5 with a fixed text, namely 'USB to charge phones and small electronics outputs 5 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "value": "5"
+ },
+ {
+ "key": "socket:USB-A:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:USB-A:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)"
+ },
+ {
+ "key": "socket:USB-A:current",
+ "description": "Layer 'Charge points' shows socket:USB-A:current=1 with a fixed text, namely 'USB to charge phones and small electronics outputs at most 1 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "value": "1"
+ },
+ {
+ "key": "socket:USB-A:current",
+ "description": "Layer 'Charge points' shows socket:USB-A:current=2 with a fixed text, namely 'USB to charge phones and small electronics outputs at most 2 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "value": "2"
+ },
+ {
+ "key": "socket:USB-A:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:USB-A:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)"
+ },
+ {
+ "key": "socket:USB-A:output",
+ "description": "Layer 'Charge points' shows socket:USB-A:output=5W with a fixed text, namely 'USB to charge phones and small electronics outputs at most 5W' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "value": "5W"
+ },
+ {
+ "key": "socket:USB-A:output",
+ "description": "Layer 'Charge points' shows socket:USB-A:output=10W with a fixed text, namely 'USB to charge phones and small electronics outputs at most 10W' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "value": "10W"
+ },
+ {
+ "key": "socket:bosch_3pin:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:bosch_3pin:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bosch_3pin~.+ & socket:bosch_3pin!=0)"
+ },
+ {
+ "key": "socket:bosch_3pin:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:bosch_3pin:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bosch_3pin~.+ & socket:bosch_3pin!=0)"
+ },
+ {
+ "key": "socket:bosch_3pin:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:bosch_3pin:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bosch_3pin~.+ & socket:bosch_3pin!=0)"
+ },
+ {
+ "key": "socket:bosch_5pin:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:bosch_5pin:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bosch_5pin~.+ & socket:bosch_5pin!=0)"
+ },
+ {
+ "key": "socket:bosch_5pin:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:bosch_5pin:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bosch_5pin~.+ & socket:bosch_5pin!=0)"
+ },
+ {
+ "key": "socket:bosch_5pin:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:bosch_5pin:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bosch_5pin~.+ & socket:bosch_5pin!=0)"
+ },
+ {
+ "key": "socket:bs1363:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:bs1363:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)"
+ },
+ {
+ "key": "socket:bs1363:voltage",
+ "description": "Layer 'Charge points' shows socket:bs1363:voltage=230 with a fixed text, namely 'BS1363 (Type G) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
+ "value": "230"
+ },
+ {
+ "key": "socket:bs1363:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:bs1363:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)"
+ },
+ {
+ "key": "socket:bs1363:current",
+ "description": "Layer 'Charge points' shows socket:bs1363:current=13 with a fixed text, namely 'BS1363 (Type G) outputs at most 13 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
+ "value": "13"
+ },
+ {
+ "key": "socket:bs1363:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:bs1363:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)"
+ },
+ {
+ "key": "socket:bs1363:output",
+ "description": "Layer 'Charge points' shows socket:bs1363:output=3kW with a fixed text, namely 'BS1363 (Type G) outputs at most 3kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
+ "value": "3kW"
+ },
+ {
+ "key": "socket:nema5_15:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:nema5_15:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)"
+ },
+ {
+ "key": "socket:nema5_15:voltage",
+ "description": "Layer 'Charge points' shows socket:nema5_15:voltage=120 with a fixed text, namely 'NEMA 5-15 (Type B) outputs 120 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
+ "value": "120"
+ },
+ {
+ "key": "socket:nema5_15:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:nema5_15:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)"
+ },
+ {
+ "key": "socket:nema5_15:current",
+ "description": "Layer 'Charge points' shows socket:nema5_15:current=15 with a fixed text, namely 'NEMA 5-15 (Type B) outputs at most 15 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
+ "value": "15"
+ },
+ {
+ "key": "socket:nema5_15:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:nema5_15:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)"
+ },
+ {
+ "key": "socket:nema5_15:output",
+ "description": "Layer 'Charge points' shows socket:nema5_15:output=1.8 kW with a fixed text, namely 'NEMA 5-15 (Type B) outputs at most 1.8 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
+ "value": "1.8 kW"
+ },
+ {
+ "key": "socket:sev1011_t23:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:sev1011_t23:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)"
+ },
+ {
+ "key": "socket:sev1011_t23:voltage",
+ "description": "Layer 'Charge points' shows socket:sev1011_t23:voltage=230 with a fixed text, namely 'SEV 1011 T23 (Type J) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
+ "value": "230"
+ },
+ {
+ "key": "socket:sev1011_t23:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:sev1011_t23:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)"
+ },
+ {
+ "key": "socket:sev1011_t23:current",
+ "description": "Layer 'Charge points' shows socket:sev1011_t23:current=16 with a fixed text, namely 'SEV 1011 T23 (Type J) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
+ "value": "16"
+ },
+ {
+ "key": "socket:sev1011_t23:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:sev1011_t23:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)"
+ },
+ {
+ "key": "socket:sev1011_t23:output",
+ "description": "Layer 'Charge points' shows socket:sev1011_t23:output=3.7 kW with a fixed text, namely 'SEV 1011 T23 (Type J) outputs at most 3.7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
+ "value": "3.7 kW"
+ },
+ {
+ "key": "socket:as3112:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:as3112:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:as3112~.+ & socket:as3112!=0)"
+ },
+ {
+ "key": "socket:as3112:voltage",
+ "description": "Layer 'Charge points' shows socket:as3112:voltage=230 with a fixed text, namely 'AS3112 (Type I) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
+ "value": "230"
+ },
+ {
+ "key": "socket:as3112:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:as3112:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:as3112~.+ & socket:as3112!=0)"
+ },
+ {
+ "key": "socket:as3112:current",
+ "description": "Layer 'Charge points' shows socket:as3112:current=10 with a fixed text, namely 'AS3112 (Type I) outputs at most 10 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
+ "value": "10"
+ },
+ {
+ "key": "socket:as3112:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:as3112:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:as3112~.+ & socket:as3112!=0)"
+ },
+ {
+ "key": "socket:as3112:output",
+ "description": "Layer 'Charge points' shows socket:as3112:output=2.3 kW with a fixed text, namely 'AS3112 (Type I) outputs at most 2.3 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
+ "value": "2.3 kW"
+ },
+ {
+ "key": "socket:nema_5_20:voltage",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:nema_5_20:voltage' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)"
+ },
+ {
+ "key": "socket:nema_5_20:voltage",
+ "description": "Layer 'Charge points' shows socket:nema_5_20:voltage=120 with a fixed text, namely 'NEMA 5-20 (Type B) outputs 120 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
+ "value": "120"
+ },
+ {
+ "key": "socket:nema_5_20:current",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:nema_5_20:current' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)"
+ },
+ {
+ "key": "socket:nema_5_20:current",
+ "description": "Layer 'Charge points' shows socket:nema_5_20:current=20 with a fixed text, namely 'NEMA 5-20 (Type B) outputs at most 20 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
+ "value": "20"
+ },
+ {
+ "key": "socket:nema_5_20:output",
+ "description": "Layer 'Charge points' shows and asks freeform values for key 'socket:nema_5_20:output' (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)"
+ },
+ {
+ "key": "socket:nema_5_20:output",
+ "description": "Layer 'Charge points' shows socket:nema_5_20:output=2.4 kW with a fixed text, namely 'NEMA 5-20 (Type B) outputs at most 2.4 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Charging stations') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
+ "value": "2.4 kW"
}
]
}
\ No newline at end of file
diff --git a/Docs/TagInfo/mapcomplete_circular_economy.json b/Docs/TagInfo/mapcomplete_circular_economy.json
index b6a5d938b..6c2ea2a0b 100644
--- a/Docs/TagInfo/mapcomplete_circular_economy.json
+++ b/Docs/TagInfo/mapcomplete_circular_economy.json
@@ -1578,6 +1578,11 @@
"description": "Layer 'Second hand shops' shows shop=wine with a fixed text, namely 'Wine Shop' and allows to pick this as a default answer (in the mapcomplete.org theme 'Circular economy') (This is only shown if craft=)",
"value": "wine"
},
+ {
+ "key": "disused:shop",
+ "description": "Layer 'Second hand shops' shows disused:shop= with a fixed text, namely 'This shop is no longer used. It is vacant' and allows to pick this as a default answer (in the mapcomplete.org theme 'Circular economy') Picking this answer will delete the key disused:shop. (This is only shown if craft=)",
+ "value": ""
+ },
{
"key": "brand",
"description": "Layer 'Second hand shops' shows and asks freeform values for key 'brand' (in the mapcomplete.org theme 'Circular economy')"
diff --git a/Docs/TagInfo/mapcomplete_climbing.json b/Docs/TagInfo/mapcomplete_climbing.json
index 3fa8190ff..fb9a2a6ca 100644
--- a/Docs/TagInfo/mapcomplete_climbing.json
+++ b/Docs/TagInfo/mapcomplete_climbing.json
@@ -1635,6 +1635,11 @@
"description": "Layer 'Shop' shows shop=wine with a fixed text, namely 'Wine Shop' and allows to pick this as a default answer (in the mapcomplete.org theme 'Climbing gyms, clubs and spots') (This is only shown if craft=)",
"value": "wine"
},
+ {
+ "key": "disused:shop",
+ "description": "Layer 'Shop' shows disused:shop= with a fixed text, namely 'This shop is no longer used. It is vacant' and allows to pick this as a default answer (in the mapcomplete.org theme 'Climbing gyms, clubs and spots') Picking this answer will delete the key disused:shop. (This is only shown if craft=)",
+ "value": ""
+ },
{
"key": "brand",
"description": "Layer 'Shop' shows and asks freeform values for key 'brand' (in the mapcomplete.org theme 'Climbing gyms, clubs and spots')"
@@ -2493,6 +2498,16 @@
"description": "Layer 'Drinking water' shows disused:amenity=drinking_water with a fixed text, namely 'This drinking water is permanently closed' and allows to pick this as a default answer (in the mapcomplete.org theme 'Climbing gyms, clubs and spots')",
"value": "drinking_water"
},
+ {
+ "key": "fee",
+ "description": "Layer 'Drinking water' shows fee=no with a fixed text, namely 'Free to use' and allows to pick this as a default answer (in the mapcomplete.org theme 'Climbing gyms, clubs and spots')",
+ "value": "no"
+ },
+ {
+ "key": "fee",
+ "description": "Layer 'Drinking water' shows fee=yes with a fixed text, namely 'One needs to pay to use this drinking water point' and allows to pick this as a default answer (in the mapcomplete.org theme 'Climbing gyms, clubs and spots')",
+ "value": "yes"
+ },
{
"key": "fountain",
"description": "Layer 'Drinking water' shows fountain=bubbler with a fixed text, namely 'This is a bubbler fountain. A water jet to drink from is sent upwards, typically controlled by a push button.' and allows to pick this as a default answer (in the mapcomplete.org theme 'Climbing gyms, clubs and spots')",
@@ -2519,13 +2534,28 @@
"value": "no"
},
{
- "key": "fee",
- "description": "Layer 'Drinking water' shows fee=no with a fixed text, namely 'Free to use' and allows to pick this as a default answer (in the mapcomplete.org theme 'Climbing gyms, clubs and spots')",
- "value": "no"
+ "key": "iced_water",
+ "description": "Layer 'Drinking water' shows iced_water=yes with a fixed text, namely 'Ice-cold water is provided here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Climbing gyms, clubs and spots')",
+ "value": "yes"
},
{
- "key": "fee",
- "description": "Layer 'Drinking water' shows fee=yes with a fixed text, namely 'One needs to pay to use this drinking water point' and allows to pick this as a default answer (in the mapcomplete.org theme 'Climbing gyms, clubs and spots')",
+ "key": "cold_water",
+ "description": "Layer 'Drinking water' shows cold_water=yes with a fixed text, namely 'Actively cooled water is available here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Climbing gyms, clubs and spots')",
+ "value": "yes"
+ },
+ {
+ "key": "room_temperature_water",
+ "description": "Layer 'Drinking water' shows room_temperature_water=yes with a fixed text, namely 'Ambient temperature water (without active cooling or heating) is available here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Climbing gyms, clubs and spots')",
+ "value": "yes"
+ },
+ {
+ "key": "warm_water",
+ "description": "Layer 'Drinking water' shows warm_water=yes with a fixed text, namely 'Warmed water is provided here; the water is not dangerously hot' and allows to pick this as a default answer (in the mapcomplete.org theme 'Climbing gyms, clubs and spots')",
+ "value": "yes"
+ },
+ {
+ "key": "hot_water",
+ "description": "Layer 'Drinking water' shows hot_water=yes with a fixed text, namely 'Hot water is provided here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Climbing gyms, clubs and spots')",
"value": "yes"
},
{
diff --git a/Docs/TagInfo/mapcomplete_cyclofix.json b/Docs/TagInfo/mapcomplete_cyclofix.json
index 2280a26f7..b166ff974 100644
--- a/Docs/TagInfo/mapcomplete_cyclofix.json
+++ b/Docs/TagInfo/mapcomplete_cyclofix.json
@@ -1164,6 +1164,11 @@
"description": "Layer 'Bike repair/shop' shows shop=wine with a fixed text, namely 'Wine Shop' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if craft=)",
"value": "wine"
},
+ {
+ "key": "disused:shop",
+ "description": "Layer 'Bike repair/shop' shows disused:shop= with a fixed text, namely 'This shop is no longer used. It is vacant' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') Picking this answer will delete the key disused:shop. (This is only shown if craft=)",
+ "value": ""
+ },
{
"key": "brand",
"description": "Layer 'Bike repair/shop' shows and asks freeform values for key 'brand' (in the mapcomplete.org theme 'Cyclofix - a map for cyclists')"
@@ -1944,6 +1949,16 @@
"description": "Layer 'Drinking water' shows disused:amenity=drinking_water with a fixed text, namely 'This drinking water is permanently closed' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists')",
"value": "drinking_water"
},
+ {
+ "key": "fee",
+ "description": "Layer 'Drinking water' shows fee=no with a fixed text, namely 'Free to use' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists')",
+ "value": "no"
+ },
+ {
+ "key": "fee",
+ "description": "Layer 'Drinking water' shows fee=yes with a fixed text, namely 'One needs to pay to use this drinking water point' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists')",
+ "value": "yes"
+ },
{
"key": "fountain",
"description": "Layer 'Drinking water' shows fountain=bubbler with a fixed text, namely 'This is a bubbler fountain. A water jet to drink from is sent upwards, typically controlled by a push button.' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists')",
@@ -1970,13 +1985,28 @@
"value": "no"
},
{
- "key": "fee",
- "description": "Layer 'Drinking water' shows fee=no with a fixed text, namely 'Free to use' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists')",
- "value": "no"
+ "key": "iced_water",
+ "description": "Layer 'Drinking water' shows iced_water=yes with a fixed text, namely 'Ice-cold water is provided here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists')",
+ "value": "yes"
},
{
- "key": "fee",
- "description": "Layer 'Drinking water' shows fee=yes with a fixed text, namely 'One needs to pay to use this drinking water point' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists')",
+ "key": "cold_water",
+ "description": "Layer 'Drinking water' shows cold_water=yes with a fixed text, namely 'Actively cooled water is available here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists')",
+ "value": "yes"
+ },
+ {
+ "key": "room_temperature_water",
+ "description": "Layer 'Drinking water' shows room_temperature_water=yes with a fixed text, namely 'Ambient temperature water (without active cooling or heating) is available here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists')",
+ "value": "yes"
+ },
+ {
+ "key": "warm_water",
+ "description": "Layer 'Drinking water' shows warm_water=yes with a fixed text, namely 'Warmed water is provided here; the water is not dangerously hot' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists')",
+ "value": "yes"
+ },
+ {
+ "key": "hot_water",
+ "description": "Layer 'Drinking water' shows hot_water=yes with a fixed text, namely 'Hot water is provided here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists')",
"value": "yes"
},
{
@@ -3233,8 +3263,8 @@
},
{
"key": "socket:schuko:voltage",
- "description": "Layer 'Charging stations' shows socket:schuko:voltage=230 V with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:schuko:voltage=230 with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
+ "value": "230"
},
{
"key": "socket:schuko:current",
@@ -3242,8 +3272,8 @@
},
{
"key": "socket:schuko:current",
- "description": "Layer 'Charging stations' shows socket:schuko:current=16 A with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
- "value": "16 A"
+ "description": "Layer 'Charging stations' shows socket:schuko:current=16 with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
+ "value": "16"
},
{
"key": "socket:schuko:output",
@@ -3251,7 +3281,7 @@
},
{
"key": "socket:schuko:output",
- "description": "Layer 'Charging stations' shows socket:schuko:output=3.6 kW with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 3.6 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
+ "description": "Layer 'Charging stations' shows socket:schuko:output=3.6 kW with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 3.6 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
"value": "3.6 kW"
},
{
@@ -3264,8 +3294,8 @@
},
{
"key": "socket:typee:voltage",
- "description": "Layer 'Charging stations' shows socket:typee:voltage=230 V with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:typee~.+ & socket:typee!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:typee:voltage=230 with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:typee~.+ & socket:typee!=0)",
+ "value": "230"
},
{
"key": "socket:typee:current",
@@ -3273,8 +3303,8 @@
},
{
"key": "socket:typee:current",
- "description": "Layer 'Charging stations' shows socket:typee:current=16 A with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:typee~.+ & socket:typee!=0)",
- "value": "16 A"
+ "description": "Layer 'Charging stations' shows socket:typee:current=16 with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:typee~.+ & socket:typee!=0)",
+ "value": "16"
},
{
"key": "socket:typee:output",
@@ -3282,12 +3312,12 @@
},
{
"key": "socket:typee:output",
- "description": "Layer 'Charging stations' shows socket:typee:output=3 kW with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 3 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:typee~.+ & socket:typee!=0)",
+ "description": "Layer 'Charging stations' shows socket:typee:output=3 kW with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 3 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:typee~.+ & socket:typee!=0)",
"value": "3 kW"
},
{
"key": "socket:typee:output",
- "description": "Layer 'Charging stations' shows socket:typee:output=22 kW with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 22 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:typee~.+ & socket:typee!=0)",
+ "description": "Layer 'Charging stations' shows socket:typee:output=22 kW with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 22 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:typee~.+ & socket:typee!=0)",
"value": "22 kW"
},
{
@@ -3300,8 +3330,8 @@
},
{
"key": "socket:chademo:voltage",
- "description": "Layer 'Charging stations' shows socket:chademo:voltage=500 V with a fixed text, namely 'Chademo outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
- "value": "500 V"
+ "description": "Layer 'Charging stations' shows socket:chademo:voltage=500 with a fixed text, namely 'Chademo outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
+ "value": "500"
},
{
"key": "socket:chademo:current",
@@ -3309,8 +3339,8 @@
},
{
"key": "socket:chademo:current",
- "description": "Layer 'Charging stations' shows socket:chademo:current=120 A with a fixed text, namely 'Chademo outputs at most 120 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
- "value": "120 A"
+ "description": "Layer 'Charging stations' shows socket:chademo:current=120 with a fixed text, namely 'Chademo outputs at most 120 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
+ "value": "120"
},
{
"key": "socket:chademo:output",
@@ -3318,7 +3348,7 @@
},
{
"key": "socket:chademo:output",
- "description": "Layer 'Charging stations' shows socket:chademo:output=50 kW with a fixed text, namely 'Chademo outputs at most 50 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
+ "description": "Layer 'Charging stations' shows socket:chademo:output=50 kW with a fixed text, namely 'Chademo outputs at most 50 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
"value": "50 kW"
},
{
@@ -3331,13 +3361,13 @@
},
{
"key": "socket:type1_cable:voltage",
- "description": "Layer 'Charging stations' shows socket:type1_cable:voltage=200 V with a fixed text, namely 'Type 1 with cable (J1772) outputs 200 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
- "value": "200 V"
+ "description": "Layer 'Charging stations' shows socket:type1_cable:voltage=200 with a fixed text, namely 'Type 1 with cable (J1772) outputs 200 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "value": "200"
},
{
"key": "socket:type1_cable:voltage",
- "description": "Layer 'Charging stations' shows socket:type1_cable:voltage=240 V with a fixed text, namely 'Type 1 with cable (J1772) outputs 240 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
- "value": "240 V"
+ "description": "Layer 'Charging stations' shows socket:type1_cable:voltage=240 with a fixed text, namely 'Type 1 with cable (J1772) outputs 240 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "value": "240"
},
{
"key": "socket:type1_cable:current",
@@ -3345,8 +3375,8 @@
},
{
"key": "socket:type1_cable:current",
- "description": "Layer 'Charging stations' shows socket:type1_cable:current=32 A with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
- "value": "32 A"
+ "description": "Layer 'Charging stations' shows socket:type1_cable:current=32 with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "value": "32"
},
{
"key": "socket:type1_cable:output",
@@ -3354,12 +3384,12 @@
},
{
"key": "socket:type1_cable:output",
- "description": "Layer 'Charging stations' shows socket:type1_cable:output=3.7 kW with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 3.7 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1_cable:output=3.7 kW with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 3.7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
"value": "3.7 kW"
},
{
"key": "socket:type1_cable:output",
- "description": "Layer 'Charging stations' shows socket:type1_cable:output=7 kW with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 7 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1_cable:output=7 kW with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
"value": "7 kW"
},
{
@@ -3372,13 +3402,13 @@
},
{
"key": "socket:type1:voltage",
- "description": "Layer 'Charging stations' shows socket:type1:voltage=200 V with a fixed text, namely 'Type 1 without cable (J1772) outputs 200 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1~.+ & socket:type1!=0)",
- "value": "200 V"
+ "description": "Layer 'Charging stations' shows socket:type1:voltage=200 with a fixed text, namely 'Type 1 without cable (J1772) outputs 200 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "value": "200"
},
{
"key": "socket:type1:voltage",
- "description": "Layer 'Charging stations' shows socket:type1:voltage=240 V with a fixed text, namely 'Type 1 without cable (J1772) outputs 240 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1~.+ & socket:type1!=0)",
- "value": "240 V"
+ "description": "Layer 'Charging stations' shows socket:type1:voltage=240 with a fixed text, namely 'Type 1 without cable (J1772) outputs 240 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "value": "240"
},
{
"key": "socket:type1:current",
@@ -3386,8 +3416,8 @@
},
{
"key": "socket:type1:current",
- "description": "Layer 'Charging stations' shows socket:type1:current=32 A with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1~.+ & socket:type1!=0)",
- "value": "32 A"
+ "description": "Layer 'Charging stations' shows socket:type1:current=32 with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "value": "32"
},
{
"key": "socket:type1:output",
@@ -3395,22 +3425,22 @@
},
{
"key": "socket:type1:output",
- "description": "Layer 'Charging stations' shows socket:type1:output=3.7 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 3.7 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1:output=3.7 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 3.7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1~.+ & socket:type1!=0)",
"value": "3.7 kW"
},
{
"key": "socket:type1:output",
- "description": "Layer 'Charging stations' shows socket:type1:output=6.6 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 6.6 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1:output=6.6 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 6.6 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1~.+ & socket:type1!=0)",
"value": "6.6 kW"
},
{
"key": "socket:type1:output",
- "description": "Layer 'Charging stations' shows socket:type1:output=7 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 7 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1:output=7 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1~.+ & socket:type1!=0)",
"value": "7 kW"
},
{
"key": "socket:type1:output",
- "description": "Layer 'Charging stations' shows socket:type1:output=7.2 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 7.2 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1:output=7.2 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 7.2 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1~.+ & socket:type1!=0)",
"value": "7.2 kW"
},
{
@@ -3423,13 +3453,13 @@
},
{
"key": "socket:type1_combo:voltage",
- "description": "Layer 'Charging stations' shows socket:type1_combo:voltage=400 V with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
- "value": "400 V"
+ "description": "Layer 'Charging stations' shows socket:type1_combo:voltage=400 with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "400"
},
{
"key": "socket:type1_combo:voltage",
- "description": "Layer 'Charging stations' shows socket:type1_combo:voltage=1000 V with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs 1000 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
- "value": "1000 V"
+ "description": "Layer 'Charging stations' shows socket:type1_combo:voltage=1000 with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs 1000 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "1000"
},
{
"key": "socket:type1_combo:current",
@@ -3437,13 +3467,13 @@
},
{
"key": "socket:type1_combo:current",
- "description": "Layer 'Charging stations' shows socket:type1_combo:current=50 A with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 50 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
- "value": "50 A"
+ "description": "Layer 'Charging stations' shows socket:type1_combo:current=50 with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 50 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "50"
},
{
"key": "socket:type1_combo:current",
- "description": "Layer 'Charging stations' shows socket:type1_combo:current=125 A with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
- "value": "125 A"
+ "description": "Layer 'Charging stations' shows socket:type1_combo:current=125 with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "125"
},
{
"key": "socket:type1_combo:output",
@@ -3451,22 +3481,22 @@
},
{
"key": "socket:type1_combo:output",
- "description": "Layer 'Charging stations' shows socket:type1_combo:output=50 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 50 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1_combo:output=50 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 50 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
"value": "50 kW"
},
{
"key": "socket:type1_combo:output",
- "description": "Layer 'Charging stations' shows socket:type1_combo:output=62.5 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 62.5 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1_combo:output=62.5 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 62.5 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
"value": "62.5 kW"
},
{
"key": "socket:type1_combo:output",
- "description": "Layer 'Charging stations' shows socket:type1_combo:output=150 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 150 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1_combo:output=150 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 150 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
"value": "150 kW"
},
{
"key": "socket:type1_combo:output",
- "description": "Layer 'Charging stations' shows socket:type1_combo:output=350 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 350 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1_combo:output=350 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 350 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
"value": "350 kW"
},
{
@@ -3479,8 +3509,8 @@
},
{
"key": "socket:tesla_supercharger:voltage",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger:voltage=480 V with a fixed text, namely 'Tesla Supercharger outputs 480 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
- "value": "480 V"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger:voltage=480 with a fixed text, namely 'Tesla Supercharger outputs 480 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "value": "480"
},
{
"key": "socket:tesla_supercharger:current",
@@ -3488,13 +3518,13 @@
},
{
"key": "socket:tesla_supercharger:current",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger:current=125 A with a fixed text, namely 'Tesla Supercharger outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
- "value": "125 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger:current=125 with a fixed text, namely 'Tesla Supercharger outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "value": "125"
},
{
"key": "socket:tesla_supercharger:current",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger:current=350 A with a fixed text, namely 'Tesla Supercharger outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
- "value": "350 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger:current=350 with a fixed text, namely 'Tesla Supercharger outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "value": "350"
},
{
"key": "socket:tesla_supercharger:output",
@@ -3502,17 +3532,17 @@
},
{
"key": "socket:tesla_supercharger:output",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger:output=120 kW with a fixed text, namely 'Tesla Supercharger outputs at most 120 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger:output=120 kW with a fixed text, namely 'Tesla Supercharger outputs at most 120 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
"value": "120 kW"
},
{
"key": "socket:tesla_supercharger:output",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger:output=150 kW with a fixed text, namely 'Tesla Supercharger outputs at most 150 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger:output=150 kW with a fixed text, namely 'Tesla Supercharger outputs at most 150 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
"value": "150 kW"
},
{
"key": "socket:tesla_supercharger:output",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger:output=250 kW with a fixed text, namely 'Tesla Supercharger outputs at most 250 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger:output=250 kW with a fixed text, namely 'Tesla Supercharger outputs at most 250 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
"value": "250 kW"
},
{
@@ -3525,13 +3555,13 @@
},
{
"key": "socket:type2:voltage",
- "description": "Layer 'Charging stations' shows socket:type2:voltage=230 V with a fixed text, namely 'Type 2 (mennekes) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2~.+ & socket:type2!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:type2:voltage=230 with a fixed text, namely 'Type 2 (mennekes) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "value": "230"
},
{
"key": "socket:type2:voltage",
- "description": "Layer 'Charging stations' shows socket:type2:voltage=400 V with a fixed text, namely 'Type 2 (mennekes) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2~.+ & socket:type2!=0)",
- "value": "400 V"
+ "description": "Layer 'Charging stations' shows socket:type2:voltage=400 with a fixed text, namely 'Type 2 (mennekes) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "value": "400"
},
{
"key": "socket:type2:current",
@@ -3539,13 +3569,13 @@
},
{
"key": "socket:type2:current",
- "description": "Layer 'Charging stations' shows socket:type2:current=16 A with a fixed text, namely 'Type 2 (mennekes) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2~.+ & socket:type2!=0)",
- "value": "16 A"
+ "description": "Layer 'Charging stations' shows socket:type2:current=16 with a fixed text, namely 'Type 2 (mennekes) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "value": "16"
},
{
"key": "socket:type2:current",
- "description": "Layer 'Charging stations' shows socket:type2:current=32 A with a fixed text, namely 'Type 2 (mennekes) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2~.+ & socket:type2!=0)",
- "value": "32 A"
+ "description": "Layer 'Charging stations' shows socket:type2:current=32 with a fixed text, namely 'Type 2 (mennekes) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "value": "32"
},
{
"key": "socket:type2:output",
@@ -3553,12 +3583,12 @@
},
{
"key": "socket:type2:output",
- "description": "Layer 'Charging stations' shows socket:type2:output=11 kW with a fixed text, namely 'Type 2 (mennekes) outputs at most 11 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "description": "Layer 'Charging stations' shows socket:type2:output=11 kW with a fixed text, namely 'Type 2 (mennekes) outputs at most 11 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2~.+ & socket:type2!=0)",
"value": "11 kW"
},
{
"key": "socket:type2:output",
- "description": "Layer 'Charging stations' shows socket:type2:output=22 kW with a fixed text, namely 'Type 2 (mennekes) outputs at most 22 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "description": "Layer 'Charging stations' shows socket:type2:output=22 kW with a fixed text, namely 'Type 2 (mennekes) outputs at most 22 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2~.+ & socket:type2!=0)",
"value": "22 kW"
},
{
@@ -3571,13 +3601,13 @@
},
{
"key": "socket:type2_combo:voltage",
- "description": "Layer 'Charging stations' shows socket:type2_combo:voltage=500 V with a fixed text, namely 'Type 2 CCS (mennekes) outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
- "value": "500 V"
+ "description": "Layer 'Charging stations' shows socket:type2_combo:voltage=500 with a fixed text, namely 'Type 2 CCS (mennekes) outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "value": "500"
},
{
"key": "socket:type2_combo:voltage",
- "description": "Layer 'Charging stations' shows socket:type2_combo:voltage=920 V with a fixed text, namely 'Type 2 CCS (mennekes) outputs 920 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
- "value": "920 V"
+ "description": "Layer 'Charging stations' shows socket:type2_combo:voltage=920 with a fixed text, namely 'Type 2 CCS (mennekes) outputs 920 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "value": "920"
},
{
"key": "socket:type2_combo:current",
@@ -3585,13 +3615,13 @@
},
{
"key": "socket:type2_combo:current",
- "description": "Layer 'Charging stations' shows socket:type2_combo:current=125 A with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
- "value": "125 A"
+ "description": "Layer 'Charging stations' shows socket:type2_combo:current=125 with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "value": "125"
},
{
"key": "socket:type2_combo:current",
- "description": "Layer 'Charging stations' shows socket:type2_combo:current=350 A with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
- "value": "350 A"
+ "description": "Layer 'Charging stations' shows socket:type2_combo:current=350 with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "value": "350"
},
{
"key": "socket:type2_combo:output",
@@ -3599,7 +3629,7 @@
},
{
"key": "socket:type2_combo:output",
- "description": "Layer 'Charging stations' shows socket:type2_combo:output=50 kW with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 50 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "description": "Layer 'Charging stations' shows socket:type2_combo:output=50 kW with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 50 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
"value": "50 kW"
},
{
@@ -3612,13 +3642,13 @@
},
{
"key": "socket:type2_cable:voltage",
- "description": "Layer 'Charging stations' shows socket:type2_cable:voltage=230 V with a fixed text, namely 'Type 2 with cable (mennekes) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:type2_cable:voltage=230 with a fixed text, namely 'Type 2 with cable (mennekes) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "value": "230"
},
{
"key": "socket:type2_cable:voltage",
- "description": "Layer 'Charging stations' shows socket:type2_cable:voltage=400 V with a fixed text, namely 'Type 2 with cable (mennekes) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
- "value": "400 V"
+ "description": "Layer 'Charging stations' shows socket:type2_cable:voltage=400 with a fixed text, namely 'Type 2 with cable (mennekes) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "value": "400"
},
{
"key": "socket:type2_cable:current",
@@ -3626,13 +3656,13 @@
},
{
"key": "socket:type2_cable:current",
- "description": "Layer 'Charging stations' shows socket:type2_cable:current=16 A with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
- "value": "16 A"
+ "description": "Layer 'Charging stations' shows socket:type2_cable:current=16 with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "value": "16"
},
{
"key": "socket:type2_cable:current",
- "description": "Layer 'Charging stations' shows socket:type2_cable:current=32 A with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
- "value": "32 A"
+ "description": "Layer 'Charging stations' shows socket:type2_cable:current=32 with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "value": "32"
},
{
"key": "socket:type2_cable:output",
@@ -3640,12 +3670,12 @@
},
{
"key": "socket:type2_cable:output",
- "description": "Layer 'Charging stations' shows socket:type2_cable:output=11 kW with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 11 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "description": "Layer 'Charging stations' shows socket:type2_cable:output=11 kW with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 11 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
"value": "11 kW"
},
{
"key": "socket:type2_cable:output",
- "description": "Layer 'Charging stations' shows socket:type2_cable:output=22 kW with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 22 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "description": "Layer 'Charging stations' shows socket:type2_cable:output=22 kW with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 22 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
"value": "22 kW"
},
{
@@ -3658,13 +3688,13 @@
},
{
"key": "socket:tesla_supercharger_ccs:voltage",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:voltage=500 V with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
- "value": "500 V"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:voltage=500 with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "value": "500"
},
{
"key": "socket:tesla_supercharger_ccs:voltage",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:voltage=920 V with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs 920 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
- "value": "920 V"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:voltage=920 with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs 920 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "value": "920"
},
{
"key": "socket:tesla_supercharger_ccs:current",
@@ -3672,13 +3702,13 @@
},
{
"key": "socket:tesla_supercharger_ccs:current",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:current=125 A with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
- "value": "125 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:current=125 with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "value": "125"
},
{
"key": "socket:tesla_supercharger_ccs:current",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:current=350 A with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
- "value": "350 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:current=350 with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "value": "350"
},
{
"key": "socket:tesla_supercharger_ccs:output",
@@ -3686,7 +3716,7 @@
},
{
"key": "socket:tesla_supercharger_ccs:output",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:output=50 kW with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 50 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:output=50 kW with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 50 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
"value": "50 kW"
},
{
@@ -3699,8 +3729,8 @@
},
{
"key": "socket:tesla_destination:voltage",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:voltage=480 V with a fixed text, namely 'Tesla Supercharger (destination) outputs 480 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "480 V"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:voltage=480 with a fixed text, namely 'Tesla Supercharger (destination) outputs 480 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "480"
},
{
"key": "socket:tesla_destination:current",
@@ -3708,13 +3738,13 @@
},
{
"key": "socket:tesla_destination:current",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:current=125 A with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "125 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:current=125 with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "125"
},
{
"key": "socket:tesla_destination:current",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:current=350 A with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "350 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:current=350 with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "350"
},
{
"key": "socket:tesla_destination:output",
@@ -3722,17 +3752,17 @@
},
{
"key": "socket:tesla_destination:output",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:output=120 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 120 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:output=120 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 120 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
"value": "120 kW"
},
{
"key": "socket:tesla_destination:output",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:output=150 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 150 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:output=150 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 150 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
"value": "150 kW"
},
{
"key": "socket:tesla_destination:output",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:output=250 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 250 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:output=250 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 250 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
"value": "250 kW"
},
{
@@ -3745,13 +3775,13 @@
},
{
"key": "socket:tesla_destination:voltage",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:voltage=230 V with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:voltage=230 with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "230"
},
{
"key": "socket:tesla_destination:voltage",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:voltage=400 V with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "400 V"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:voltage=400 with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "400"
},
{
"key": "socket:tesla_destination:current",
@@ -3759,13 +3789,13 @@
},
{
"key": "socket:tesla_destination:current",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:current=16 A with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "16 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:current=16 with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "16"
},
{
"key": "socket:tesla_destination:current",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:current=32 A with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "32 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:current=32 with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "32"
},
{
"key": "socket:tesla_destination:output",
@@ -3773,12 +3803,12 @@
},
{
"key": "socket:tesla_destination:output",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:output=11 kW with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 11 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:output=11 kW with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 11 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
"value": "11 kW"
},
{
"key": "socket:tesla_destination:output",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:output=22 kW with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 22 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:output=22 kW with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 22 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
"value": "22 kW"
},
{
@@ -3791,8 +3821,8 @@
},
{
"key": "socket:USB-A:voltage",
- "description": "Layer 'Charging stations' shows socket:USB-A:voltage=5 V with a fixed text, namely 'USB to charge phones and small electronics outputs 5 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
- "value": "5 V"
+ "description": "Layer 'Charging stations' shows socket:USB-A:voltage=5 with a fixed text, namely 'USB to charge phones and small electronics outputs 5 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "value": "5"
},
{
"key": "socket:USB-A:current",
@@ -3800,13 +3830,13 @@
},
{
"key": "socket:USB-A:current",
- "description": "Layer 'Charging stations' shows socket:USB-A:current=1 A with a fixed text, namely 'USB to charge phones and small electronics outputs at most 1 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
- "value": "1 A"
+ "description": "Layer 'Charging stations' shows socket:USB-A:current=1 with a fixed text, namely 'USB to charge phones and small electronics outputs at most 1 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "value": "1"
},
{
"key": "socket:USB-A:current",
- "description": "Layer 'Charging stations' shows socket:USB-A:current=2 A with a fixed text, namely 'USB to charge phones and small electronics outputs at most 2 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
- "value": "2 A"
+ "description": "Layer 'Charging stations' shows socket:USB-A:current=2 with a fixed text, namely 'USB to charge phones and small electronics outputs at most 2 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "value": "2"
},
{
"key": "socket:USB-A:output",
@@ -3814,12 +3844,12 @@
},
{
"key": "socket:USB-A:output",
- "description": "Layer 'Charging stations' shows socket:USB-A:output=5W with a fixed text, namely 'USB to charge phones and small electronics outputs at most 5W A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "description": "Layer 'Charging stations' shows socket:USB-A:output=5W with a fixed text, namely 'USB to charge phones and small electronics outputs at most 5W' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
"value": "5W"
},
{
"key": "socket:USB-A:output",
- "description": "Layer 'Charging stations' shows socket:USB-A:output=10W with a fixed text, namely 'USB to charge phones and small electronics outputs at most 10W A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "description": "Layer 'Charging stations' shows socket:USB-A:output=10W with a fixed text, namely 'USB to charge phones and small electronics outputs at most 10W' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
"value": "10W"
},
{
@@ -3864,8 +3894,8 @@
},
{
"key": "socket:bs1363:voltage",
- "description": "Layer 'Charging stations' shows socket:bs1363:voltage=230 V with a fixed text, namely 'BS1363 (Type G) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:bs1363:voltage=230 with a fixed text, namely 'BS1363 (Type G) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
+ "value": "230"
},
{
"key": "socket:bs1363:current",
@@ -3873,8 +3903,8 @@
},
{
"key": "socket:bs1363:current",
- "description": "Layer 'Charging stations' shows socket:bs1363:current=13 A with a fixed text, namely 'BS1363 (Type G) outputs at most 13 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
- "value": "13 A"
+ "description": "Layer 'Charging stations' shows socket:bs1363:current=13 with a fixed text, namely 'BS1363 (Type G) outputs at most 13 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
+ "value": "13"
},
{
"key": "socket:bs1363:output",
@@ -3882,7 +3912,7 @@
},
{
"key": "socket:bs1363:output",
- "description": "Layer 'Charging stations' shows socket:bs1363:output=3kW with a fixed text, namely 'BS1363 (Type G) outputs at most 3kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
+ "description": "Layer 'Charging stations' shows socket:bs1363:output=3kW with a fixed text, namely 'BS1363 (Type G) outputs at most 3kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
"value": "3kW"
},
{
@@ -3895,8 +3925,8 @@
},
{
"key": "socket:nema5_15:voltage",
- "description": "Layer 'Charging stations' shows socket:nema5_15:voltage=120 V with a fixed text, namely 'NEMA 5-15 (Type B) outputs 120 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
- "value": "120 V"
+ "description": "Layer 'Charging stations' shows socket:nema5_15:voltage=120 with a fixed text, namely 'NEMA 5-15 (Type B) outputs 120 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
+ "value": "120"
},
{
"key": "socket:nema5_15:current",
@@ -3904,8 +3934,8 @@
},
{
"key": "socket:nema5_15:current",
- "description": "Layer 'Charging stations' shows socket:nema5_15:current=15 A with a fixed text, namely 'NEMA 5-15 (Type B) outputs at most 15 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
- "value": "15 A"
+ "description": "Layer 'Charging stations' shows socket:nema5_15:current=15 with a fixed text, namely 'NEMA 5-15 (Type B) outputs at most 15 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
+ "value": "15"
},
{
"key": "socket:nema5_15:output",
@@ -3913,7 +3943,7 @@
},
{
"key": "socket:nema5_15:output",
- "description": "Layer 'Charging stations' shows socket:nema5_15:output=1.8 kW with a fixed text, namely 'NEMA 5-15 (Type B) outputs at most 1.8 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
+ "description": "Layer 'Charging stations' shows socket:nema5_15:output=1.8 kW with a fixed text, namely 'NEMA 5-15 (Type B) outputs at most 1.8 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
"value": "1.8 kW"
},
{
@@ -3926,8 +3956,8 @@
},
{
"key": "socket:sev1011_t23:voltage",
- "description": "Layer 'Charging stations' shows socket:sev1011_t23:voltage=230 V with a fixed text, namely 'SEV 1011 T23 (Type J) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:sev1011_t23:voltage=230 with a fixed text, namely 'SEV 1011 T23 (Type J) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
+ "value": "230"
},
{
"key": "socket:sev1011_t23:current",
@@ -3935,8 +3965,8 @@
},
{
"key": "socket:sev1011_t23:current",
- "description": "Layer 'Charging stations' shows socket:sev1011_t23:current=16 A with a fixed text, namely 'SEV 1011 T23 (Type J) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
- "value": "16 A"
+ "description": "Layer 'Charging stations' shows socket:sev1011_t23:current=16 with a fixed text, namely 'SEV 1011 T23 (Type J) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
+ "value": "16"
},
{
"key": "socket:sev1011_t23:output",
@@ -3944,7 +3974,7 @@
},
{
"key": "socket:sev1011_t23:output",
- "description": "Layer 'Charging stations' shows socket:sev1011_t23:output=3.7 kW with a fixed text, namely 'SEV 1011 T23 (Type J) outputs at most 3.7 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
+ "description": "Layer 'Charging stations' shows socket:sev1011_t23:output=3.7 kW with a fixed text, namely 'SEV 1011 T23 (Type J) outputs at most 3.7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
"value": "3.7 kW"
},
{
@@ -3957,8 +3987,8 @@
},
{
"key": "socket:as3112:voltage",
- "description": "Layer 'Charging stations' shows socket:as3112:voltage=230 V with a fixed text, namely 'AS3112 (Type I) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:as3112:voltage=230 with a fixed text, namely 'AS3112 (Type I) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
+ "value": "230"
},
{
"key": "socket:as3112:current",
@@ -3966,8 +3996,8 @@
},
{
"key": "socket:as3112:current",
- "description": "Layer 'Charging stations' shows socket:as3112:current=10 A with a fixed text, namely 'AS3112 (Type I) outputs at most 10 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
- "value": "10 A"
+ "description": "Layer 'Charging stations' shows socket:as3112:current=10 with a fixed text, namely 'AS3112 (Type I) outputs at most 10 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
+ "value": "10"
},
{
"key": "socket:as3112:output",
@@ -3975,7 +4005,7 @@
},
{
"key": "socket:as3112:output",
- "description": "Layer 'Charging stations' shows socket:as3112:output=2.3 kW with a fixed text, namely 'AS3112 (Type I) outputs at most 2.3 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
+ "description": "Layer 'Charging stations' shows socket:as3112:output=2.3 kW with a fixed text, namely 'AS3112 (Type I) outputs at most 2.3 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
"value": "2.3 kW"
},
{
@@ -3988,8 +4018,8 @@
},
{
"key": "socket:nema_5_20:voltage",
- "description": "Layer 'Charging stations' shows socket:nema_5_20:voltage=120 V with a fixed text, namely 'NEMA 5-20 (Type B) outputs 120 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
- "value": "120 V"
+ "description": "Layer 'Charging stations' shows socket:nema_5_20:voltage=120 with a fixed text, namely 'NEMA 5-20 (Type B) outputs 120 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
+ "value": "120"
},
{
"key": "socket:nema_5_20:current",
@@ -3997,8 +4027,8 @@
},
{
"key": "socket:nema_5_20:current",
- "description": "Layer 'Charging stations' shows socket:nema_5_20:current=20 A with a fixed text, namely 'NEMA 5-20 (Type B) outputs at most 20 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
- "value": "20 A"
+ "description": "Layer 'Charging stations' shows socket:nema_5_20:current=20 with a fixed text, namely 'NEMA 5-20 (Type B) outputs at most 20 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
+ "value": "20"
},
{
"key": "socket:nema_5_20:output",
@@ -4006,7 +4036,7 @@
},
{
"key": "socket:nema_5_20:output",
- "description": "Layer 'Charging stations' shows socket:nema_5_20:output=2.4 kW with a fixed text, namely 'NEMA 5-20 (Type B) outputs at most 2.4 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
+ "description": "Layer 'Charging stations' shows socket:nema_5_20:output=2.4 kW with a fixed text, namely 'NEMA 5-20 (Type B) outputs at most 2.4 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Cyclofix - a map for cyclists') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
"value": "2.4 kW"
},
{
diff --git a/Docs/TagInfo/mapcomplete_drinking_water.json b/Docs/TagInfo/mapcomplete_drinking_water.json
index df79890e2..4a364151c 100644
--- a/Docs/TagInfo/mapcomplete_drinking_water.json
+++ b/Docs/TagInfo/mapcomplete_drinking_water.json
@@ -78,6 +78,16 @@
"description": "Layer 'Drinking water' shows disused:amenity=drinking_water with a fixed text, namely 'This drinking water is permanently closed' and allows to pick this as a default answer (in the mapcomplete.org theme 'Drinking Water')",
"value": "drinking_water"
},
+ {
+ "key": "fee",
+ "description": "Layer 'Drinking water' shows fee=no with a fixed text, namely 'Free to use' and allows to pick this as a default answer (in the mapcomplete.org theme 'Drinking Water')",
+ "value": "no"
+ },
+ {
+ "key": "fee",
+ "description": "Layer 'Drinking water' shows fee=yes with a fixed text, namely 'One needs to pay to use this drinking water point' and allows to pick this as a default answer (in the mapcomplete.org theme 'Drinking Water')",
+ "value": "yes"
+ },
{
"key": "fountain",
"description": "Layer 'Drinking water' shows fountain=bubbler with a fixed text, namely 'This is a bubbler fountain. A water jet to drink from is sent upwards, typically controlled by a push button.' and allows to pick this as a default answer (in the mapcomplete.org theme 'Drinking Water')",
@@ -104,13 +114,28 @@
"value": "no"
},
{
- "key": "fee",
- "description": "Layer 'Drinking water' shows fee=no with a fixed text, namely 'Free to use' and allows to pick this as a default answer (in the mapcomplete.org theme 'Drinking Water')",
- "value": "no"
+ "key": "iced_water",
+ "description": "Layer 'Drinking water' shows iced_water=yes with a fixed text, namely 'Ice-cold water is provided here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Drinking Water')",
+ "value": "yes"
},
{
- "key": "fee",
- "description": "Layer 'Drinking water' shows fee=yes with a fixed text, namely 'One needs to pay to use this drinking water point' and allows to pick this as a default answer (in the mapcomplete.org theme 'Drinking Water')",
+ "key": "cold_water",
+ "description": "Layer 'Drinking water' shows cold_water=yes with a fixed text, namely 'Actively cooled water is available here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Drinking Water')",
+ "value": "yes"
+ },
+ {
+ "key": "room_temperature_water",
+ "description": "Layer 'Drinking water' shows room_temperature_water=yes with a fixed text, namely 'Ambient temperature water (without active cooling or heating) is available here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Drinking Water')",
+ "value": "yes"
+ },
+ {
+ "key": "warm_water",
+ "description": "Layer 'Drinking water' shows warm_water=yes with a fixed text, namely 'Warmed water is provided here; the water is not dangerously hot' and allows to pick this as a default answer (in the mapcomplete.org theme 'Drinking Water')",
+ "value": "yes"
+ },
+ {
+ "key": "hot_water",
+ "description": "Layer 'Drinking water' shows hot_water=yes with a fixed text, namely 'Hot water is provided here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Drinking Water')",
"value": "yes"
},
{
diff --git a/Docs/TagInfo/mapcomplete_glutenfree.json b/Docs/TagInfo/mapcomplete_glutenfree.json
index 74429e633..a5d98d47a 100644
--- a/Docs/TagInfo/mapcomplete_glutenfree.json
+++ b/Docs/TagInfo/mapcomplete_glutenfree.json
@@ -1798,6 +1798,11 @@
"description": "Layer 'Shop' shows shop=wine with a fixed text, namely 'Wine Shop' and allows to pick this as a default answer (in the mapcomplete.org theme 'Glutenfree') (This is only shown if craft=)",
"value": "wine"
},
+ {
+ "key": "disused:shop",
+ "description": "Layer 'Shop' shows disused:shop= with a fixed text, namely 'This shop is no longer used. It is vacant' and allows to pick this as a default answer (in the mapcomplete.org theme 'Glutenfree') Picking this answer will delete the key disused:shop. (This is only shown if craft=)",
+ "value": ""
+ },
{
"key": "brand",
"description": "Layer 'Shop' shows and asks freeform values for key 'brand' (in the mapcomplete.org theme 'Glutenfree')"
diff --git a/Docs/TagInfo/mapcomplete_healthcare.json b/Docs/TagInfo/mapcomplete_healthcare.json
index b4cb5784b..dddc86f60 100644
--- a/Docs/TagInfo/mapcomplete_healthcare.json
+++ b/Docs/TagInfo/mapcomplete_healthcare.json
@@ -1288,6 +1288,11 @@
"description": "Layer 'Shop' shows shop=wine with a fixed text, namely 'Wine Shop' and allows to pick this as a default answer (in the mapcomplete.org theme 'Healthcare') (This is only shown if craft=)",
"value": "wine"
},
+ {
+ "key": "disused:shop",
+ "description": "Layer 'Shop' shows disused:shop= with a fixed text, namely 'This shop is no longer used. It is vacant' and allows to pick this as a default answer (in the mapcomplete.org theme 'Healthcare') Picking this answer will delete the key disused:shop. (This is only shown if craft=)",
+ "value": ""
+ },
{
"key": "brand",
"description": "Layer 'Shop' shows and asks freeform values for key 'brand' (in the mapcomplete.org theme 'Healthcare')"
diff --git a/Docs/TagInfo/mapcomplete_lactosefree.json b/Docs/TagInfo/mapcomplete_lactosefree.json
index fa292c052..53deb87c2 100644
--- a/Docs/TagInfo/mapcomplete_lactosefree.json
+++ b/Docs/TagInfo/mapcomplete_lactosefree.json
@@ -1798,6 +1798,11 @@
"description": "Layer 'Shop' shows shop=wine with a fixed text, namely 'Wine Shop' and allows to pick this as a default answer (in the mapcomplete.org theme 'Lactose free shops and restaurants') (This is only shown if craft=)",
"value": "wine"
},
+ {
+ "key": "disused:shop",
+ "description": "Layer 'Shop' shows disused:shop= with a fixed text, namely 'This shop is no longer used. It is vacant' and allows to pick this as a default answer (in the mapcomplete.org theme 'Lactose free shops and restaurants') Picking this answer will delete the key disused:shop. (This is only shown if craft=)",
+ "value": ""
+ },
{
"key": "brand",
"description": "Layer 'Shop' shows and asks freeform values for key 'brand' (in the mapcomplete.org theme 'Lactose free shops and restaurants')"
diff --git a/Docs/TagInfo/mapcomplete_nature.json b/Docs/TagInfo/mapcomplete_nature.json
index cf12d4fd4..8d70f7be4 100644
--- a/Docs/TagInfo/mapcomplete_nature.json
+++ b/Docs/TagInfo/mapcomplete_nature.json
@@ -78,6 +78,16 @@
"description": "Layer 'Drinking water' shows disused:amenity=drinking_water with a fixed text, namely 'This drinking water is permanently closed' and allows to pick this as a default answer (in the mapcomplete.org theme 'Into nature')",
"value": "drinking_water"
},
+ {
+ "key": "fee",
+ "description": "Layer 'Drinking water' shows fee=no with a fixed text, namely 'Free to use' and allows to pick this as a default answer (in the mapcomplete.org theme 'Into nature')",
+ "value": "no"
+ },
+ {
+ "key": "fee",
+ "description": "Layer 'Drinking water' shows fee=yes with a fixed text, namely 'One needs to pay to use this drinking water point' and allows to pick this as a default answer (in the mapcomplete.org theme 'Into nature')",
+ "value": "yes"
+ },
{
"key": "fountain",
"description": "Layer 'Drinking water' shows fountain=bubbler with a fixed text, namely 'This is a bubbler fountain. A water jet to drink from is sent upwards, typically controlled by a push button.' and allows to pick this as a default answer (in the mapcomplete.org theme 'Into nature')",
@@ -104,13 +114,28 @@
"value": "no"
},
{
- "key": "fee",
- "description": "Layer 'Drinking water' shows fee=no with a fixed text, namely 'Free to use' and allows to pick this as a default answer (in the mapcomplete.org theme 'Into nature')",
- "value": "no"
+ "key": "iced_water",
+ "description": "Layer 'Drinking water' shows iced_water=yes with a fixed text, namely 'Ice-cold water is provided here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Into nature')",
+ "value": "yes"
},
{
- "key": "fee",
- "description": "Layer 'Drinking water' shows fee=yes with a fixed text, namely 'One needs to pay to use this drinking water point' and allows to pick this as a default answer (in the mapcomplete.org theme 'Into nature')",
+ "key": "cold_water",
+ "description": "Layer 'Drinking water' shows cold_water=yes with a fixed text, namely 'Actively cooled water is available here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Into nature')",
+ "value": "yes"
+ },
+ {
+ "key": "room_temperature_water",
+ "description": "Layer 'Drinking water' shows room_temperature_water=yes with a fixed text, namely 'Ambient temperature water (without active cooling or heating) is available here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Into nature')",
+ "value": "yes"
+ },
+ {
+ "key": "warm_water",
+ "description": "Layer 'Drinking water' shows warm_water=yes with a fixed text, namely 'Warmed water is provided here; the water is not dangerously hot' and allows to pick this as a default answer (in the mapcomplete.org theme 'Into nature')",
+ "value": "yes"
+ },
+ {
+ "key": "hot_water",
+ "description": "Layer 'Drinking water' shows hot_water=yes with a fixed text, namely 'Hot water is provided here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Into nature')",
"value": "yes"
},
{
diff --git a/Docs/TagInfo/mapcomplete_onwheels.json b/Docs/TagInfo/mapcomplete_onwheels.json
index 52794161e..ecc5590b8 100644
--- a/Docs/TagInfo/mapcomplete_onwheels.json
+++ b/Docs/TagInfo/mapcomplete_onwheels.json
@@ -2375,6 +2375,11 @@
"description": "Layer 'Shop' shows shop=wine with a fixed text, namely 'Wine Shop' and allows to pick this as a default answer (in the mapcomplete.org theme 'OnWheels') (This is only shown if craft=)",
"value": "wine"
},
+ {
+ "key": "disused:shop",
+ "description": "Layer 'Shop' shows disused:shop= with a fixed text, namely 'This shop is no longer used. It is vacant' and allows to pick this as a default answer (in the mapcomplete.org theme 'OnWheels') Picking this answer will delete the key disused:shop. (This is only shown if craft=)",
+ "value": ""
+ },
{
"key": "brand",
"description": "Layer 'Shop' shows and asks freeform values for key 'brand' (in the mapcomplete.org theme 'OnWheels')"
diff --git a/Docs/TagInfo/mapcomplete_parkings.json b/Docs/TagInfo/mapcomplete_parkings.json
index e12882565..85897f3a3 100644
--- a/Docs/TagInfo/mapcomplete_parkings.json
+++ b/Docs/TagInfo/mapcomplete_parkings.json
@@ -778,8 +778,8 @@
},
{
"key": "socket:schuko:voltage",
- "description": "Layer 'Charging stations' shows socket:schuko:voltage=230 V with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:schuko:voltage=230 with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
+ "value": "230"
},
{
"key": "socket:schuko:current",
@@ -787,8 +787,8 @@
},
{
"key": "socket:schuko:current",
- "description": "Layer 'Charging stations' shows socket:schuko:current=16 A with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
- "value": "16 A"
+ "description": "Layer 'Charging stations' shows socket:schuko:current=16 with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
+ "value": "16"
},
{
"key": "socket:schuko:output",
@@ -796,7 +796,7 @@
},
{
"key": "socket:schuko:output",
- "description": "Layer 'Charging stations' shows socket:schuko:output=3.6 kW with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 3.6 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
+ "description": "Layer 'Charging stations' shows socket:schuko:output=3.6 kW with a fixed text, namely 'Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 3.6 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:schuko~.+ & socket:schuko!=0)",
"value": "3.6 kW"
},
{
@@ -809,8 +809,8 @@
},
{
"key": "socket:typee:voltage",
- "description": "Layer 'Charging stations' shows socket:typee:voltage=230 V with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:typee~.+ & socket:typee!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:typee:voltage=230 with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:typee~.+ & socket:typee!=0)",
+ "value": "230"
},
{
"key": "socket:typee:current",
@@ -818,8 +818,8 @@
},
{
"key": "socket:typee:current",
- "description": "Layer 'Charging stations' shows socket:typee:current=16 A with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:typee~.+ & socket:typee!=0)",
- "value": "16 A"
+ "description": "Layer 'Charging stations' shows socket:typee:current=16 with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:typee~.+ & socket:typee!=0)",
+ "value": "16"
},
{
"key": "socket:typee:output",
@@ -827,12 +827,12 @@
},
{
"key": "socket:typee:output",
- "description": "Layer 'Charging stations' shows socket:typee:output=3 kW with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 3 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:typee~.+ & socket:typee!=0)",
+ "description": "Layer 'Charging stations' shows socket:typee:output=3 kW with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 3 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:typee~.+ & socket:typee!=0)",
"value": "3 kW"
},
{
"key": "socket:typee:output",
- "description": "Layer 'Charging stations' shows socket:typee:output=22 kW with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 22 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:typee~.+ & socket:typee!=0)",
+ "description": "Layer 'Charging stations' shows socket:typee:output=22 kW with a fixed text, namely 'European wall plug with ground pin (CEE7/4 type E) outputs at most 22 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:typee~.+ & socket:typee!=0)",
"value": "22 kW"
},
{
@@ -845,8 +845,8 @@
},
{
"key": "socket:chademo:voltage",
- "description": "Layer 'Charging stations' shows socket:chademo:voltage=500 V with a fixed text, namely 'Chademo outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
- "value": "500 V"
+ "description": "Layer 'Charging stations' shows socket:chademo:voltage=500 with a fixed text, namely 'Chademo outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
+ "value": "500"
},
{
"key": "socket:chademo:current",
@@ -854,8 +854,8 @@
},
{
"key": "socket:chademo:current",
- "description": "Layer 'Charging stations' shows socket:chademo:current=120 A with a fixed text, namely 'Chademo outputs at most 120 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
- "value": "120 A"
+ "description": "Layer 'Charging stations' shows socket:chademo:current=120 with a fixed text, namely 'Chademo outputs at most 120 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
+ "value": "120"
},
{
"key": "socket:chademo:output",
@@ -863,7 +863,7 @@
},
{
"key": "socket:chademo:output",
- "description": "Layer 'Charging stations' shows socket:chademo:output=50 kW with a fixed text, namely 'Chademo outputs at most 50 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
+ "description": "Layer 'Charging stations' shows socket:chademo:output=50 kW with a fixed text, namely 'Chademo outputs at most 50 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:chademo~.+ & socket:chademo!=0)",
"value": "50 kW"
},
{
@@ -876,13 +876,13 @@
},
{
"key": "socket:type1_cable:voltage",
- "description": "Layer 'Charging stations' shows socket:type1_cable:voltage=200 V with a fixed text, namely 'Type 1 with cable (J1772) outputs 200 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
- "value": "200 V"
+ "description": "Layer 'Charging stations' shows socket:type1_cable:voltage=200 with a fixed text, namely 'Type 1 with cable (J1772) outputs 200 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "value": "200"
},
{
"key": "socket:type1_cable:voltage",
- "description": "Layer 'Charging stations' shows socket:type1_cable:voltage=240 V with a fixed text, namely 'Type 1 with cable (J1772) outputs 240 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
- "value": "240 V"
+ "description": "Layer 'Charging stations' shows socket:type1_cable:voltage=240 with a fixed text, namely 'Type 1 with cable (J1772) outputs 240 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "value": "240"
},
{
"key": "socket:type1_cable:current",
@@ -890,8 +890,8 @@
},
{
"key": "socket:type1_cable:current",
- "description": "Layer 'Charging stations' shows socket:type1_cable:current=32 A with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
- "value": "32 A"
+ "description": "Layer 'Charging stations' shows socket:type1_cable:current=32 with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "value": "32"
},
{
"key": "socket:type1_cable:output",
@@ -899,12 +899,12 @@
},
{
"key": "socket:type1_cable:output",
- "description": "Layer 'Charging stations' shows socket:type1_cable:output=3.7 kW with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 3.7 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1_cable:output=3.7 kW with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 3.7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
"value": "3.7 kW"
},
{
"key": "socket:type1_cable:output",
- "description": "Layer 'Charging stations' shows socket:type1_cable:output=7 kW with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 7 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1_cable:output=7 kW with a fixed text, namely 'Type 1 with cable (J1772) outputs at most 7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_cable~.+ & socket:type1_cable!=0)",
"value": "7 kW"
},
{
@@ -917,13 +917,13 @@
},
{
"key": "socket:type1:voltage",
- "description": "Layer 'Charging stations' shows socket:type1:voltage=200 V with a fixed text, namely 'Type 1 without cable (J1772) outputs 200 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1~.+ & socket:type1!=0)",
- "value": "200 V"
+ "description": "Layer 'Charging stations' shows socket:type1:voltage=200 with a fixed text, namely 'Type 1 without cable (J1772) outputs 200 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "value": "200"
},
{
"key": "socket:type1:voltage",
- "description": "Layer 'Charging stations' shows socket:type1:voltage=240 V with a fixed text, namely 'Type 1 without cable (J1772) outputs 240 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1~.+ & socket:type1!=0)",
- "value": "240 V"
+ "description": "Layer 'Charging stations' shows socket:type1:voltage=240 with a fixed text, namely 'Type 1 without cable (J1772) outputs 240 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "value": "240"
},
{
"key": "socket:type1:current",
@@ -931,8 +931,8 @@
},
{
"key": "socket:type1:current",
- "description": "Layer 'Charging stations' shows socket:type1:current=32 A with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1~.+ & socket:type1!=0)",
- "value": "32 A"
+ "description": "Layer 'Charging stations' shows socket:type1:current=32 with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "value": "32"
},
{
"key": "socket:type1:output",
@@ -940,22 +940,22 @@
},
{
"key": "socket:type1:output",
- "description": "Layer 'Charging stations' shows socket:type1:output=3.7 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 3.7 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1:output=3.7 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 3.7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1~.+ & socket:type1!=0)",
"value": "3.7 kW"
},
{
"key": "socket:type1:output",
- "description": "Layer 'Charging stations' shows socket:type1:output=6.6 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 6.6 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1:output=6.6 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 6.6 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1~.+ & socket:type1!=0)",
"value": "6.6 kW"
},
{
"key": "socket:type1:output",
- "description": "Layer 'Charging stations' shows socket:type1:output=7 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 7 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1:output=7 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1~.+ & socket:type1!=0)",
"value": "7 kW"
},
{
"key": "socket:type1:output",
- "description": "Layer 'Charging stations' shows socket:type1:output=7.2 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 7.2 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1~.+ & socket:type1!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1:output=7.2 kW with a fixed text, namely 'Type 1 without cable (J1772) outputs at most 7.2 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1~.+ & socket:type1!=0)",
"value": "7.2 kW"
},
{
@@ -968,13 +968,13 @@
},
{
"key": "socket:type1_combo:voltage",
- "description": "Layer 'Charging stations' shows socket:type1_combo:voltage=400 V with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
- "value": "400 V"
+ "description": "Layer 'Charging stations' shows socket:type1_combo:voltage=400 with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "400"
},
{
"key": "socket:type1_combo:voltage",
- "description": "Layer 'Charging stations' shows socket:type1_combo:voltage=1000 V with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs 1000 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
- "value": "1000 V"
+ "description": "Layer 'Charging stations' shows socket:type1_combo:voltage=1000 with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs 1000 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "1000"
},
{
"key": "socket:type1_combo:current",
@@ -982,13 +982,13 @@
},
{
"key": "socket:type1_combo:current",
- "description": "Layer 'Charging stations' shows socket:type1_combo:current=50 A with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 50 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
- "value": "50 A"
+ "description": "Layer 'Charging stations' shows socket:type1_combo:current=50 with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 50 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "50"
},
{
"key": "socket:type1_combo:current",
- "description": "Layer 'Charging stations' shows socket:type1_combo:current=125 A with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
- "value": "125 A"
+ "description": "Layer 'Charging stations' shows socket:type1_combo:current=125 with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "value": "125"
},
{
"key": "socket:type1_combo:output",
@@ -996,22 +996,22 @@
},
{
"key": "socket:type1_combo:output",
- "description": "Layer 'Charging stations' shows socket:type1_combo:output=50 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 50 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1_combo:output=50 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 50 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
"value": "50 kW"
},
{
"key": "socket:type1_combo:output",
- "description": "Layer 'Charging stations' shows socket:type1_combo:output=62.5 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 62.5 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1_combo:output=62.5 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 62.5 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
"value": "62.5 kW"
},
{
"key": "socket:type1_combo:output",
- "description": "Layer 'Charging stations' shows socket:type1_combo:output=150 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 150 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1_combo:output=150 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 150 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
"value": "150 kW"
},
{
"key": "socket:type1_combo:output",
- "description": "Layer 'Charging stations' shows socket:type1_combo:output=350 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 350 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
+ "description": "Layer 'Charging stations' shows socket:type1_combo:output=350 kW with a fixed text, namely 'Type 1 CCS (aka Type 1 Combo) outputs at most 350 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type1_combo~.+ & socket:type1_combo!=0)",
"value": "350 kW"
},
{
@@ -1024,8 +1024,8 @@
},
{
"key": "socket:tesla_supercharger:voltage",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger:voltage=480 V with a fixed text, namely 'Tesla Supercharger outputs 480 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
- "value": "480 V"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger:voltage=480 with a fixed text, namely 'Tesla Supercharger outputs 480 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "value": "480"
},
{
"key": "socket:tesla_supercharger:current",
@@ -1033,13 +1033,13 @@
},
{
"key": "socket:tesla_supercharger:current",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger:current=125 A with a fixed text, namely 'Tesla Supercharger outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
- "value": "125 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger:current=125 with a fixed text, namely 'Tesla Supercharger outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "value": "125"
},
{
"key": "socket:tesla_supercharger:current",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger:current=350 A with a fixed text, namely 'Tesla Supercharger outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
- "value": "350 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger:current=350 with a fixed text, namely 'Tesla Supercharger outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "value": "350"
},
{
"key": "socket:tesla_supercharger:output",
@@ -1047,17 +1047,17 @@
},
{
"key": "socket:tesla_supercharger:output",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger:output=120 kW with a fixed text, namely 'Tesla Supercharger outputs at most 120 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger:output=120 kW with a fixed text, namely 'Tesla Supercharger outputs at most 120 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
"value": "120 kW"
},
{
"key": "socket:tesla_supercharger:output",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger:output=150 kW with a fixed text, namely 'Tesla Supercharger outputs at most 150 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger:output=150 kW with a fixed text, namely 'Tesla Supercharger outputs at most 150 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
"value": "150 kW"
},
{
"key": "socket:tesla_supercharger:output",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger:output=250 kW with a fixed text, namely 'Tesla Supercharger outputs at most 250 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger:output=250 kW with a fixed text, namely 'Tesla Supercharger outputs at most 250 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0)",
"value": "250 kW"
},
{
@@ -1070,13 +1070,13 @@
},
{
"key": "socket:type2:voltage",
- "description": "Layer 'Charging stations' shows socket:type2:voltage=230 V with a fixed text, namely 'Type 2 (mennekes) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2~.+ & socket:type2!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:type2:voltage=230 with a fixed text, namely 'Type 2 (mennekes) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "value": "230"
},
{
"key": "socket:type2:voltage",
- "description": "Layer 'Charging stations' shows socket:type2:voltage=400 V with a fixed text, namely 'Type 2 (mennekes) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2~.+ & socket:type2!=0)",
- "value": "400 V"
+ "description": "Layer 'Charging stations' shows socket:type2:voltage=400 with a fixed text, namely 'Type 2 (mennekes) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "value": "400"
},
{
"key": "socket:type2:current",
@@ -1084,13 +1084,13 @@
},
{
"key": "socket:type2:current",
- "description": "Layer 'Charging stations' shows socket:type2:current=16 A with a fixed text, namely 'Type 2 (mennekes) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2~.+ & socket:type2!=0)",
- "value": "16 A"
+ "description": "Layer 'Charging stations' shows socket:type2:current=16 with a fixed text, namely 'Type 2 (mennekes) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "value": "16"
},
{
"key": "socket:type2:current",
- "description": "Layer 'Charging stations' shows socket:type2:current=32 A with a fixed text, namely 'Type 2 (mennekes) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2~.+ & socket:type2!=0)",
- "value": "32 A"
+ "description": "Layer 'Charging stations' shows socket:type2:current=32 with a fixed text, namely 'Type 2 (mennekes) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "value": "32"
},
{
"key": "socket:type2:output",
@@ -1098,12 +1098,12 @@
},
{
"key": "socket:type2:output",
- "description": "Layer 'Charging stations' shows socket:type2:output=11 kW with a fixed text, namely 'Type 2 (mennekes) outputs at most 11 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "description": "Layer 'Charging stations' shows socket:type2:output=11 kW with a fixed text, namely 'Type 2 (mennekes) outputs at most 11 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2~.+ & socket:type2!=0)",
"value": "11 kW"
},
{
"key": "socket:type2:output",
- "description": "Layer 'Charging stations' shows socket:type2:output=22 kW with a fixed text, namely 'Type 2 (mennekes) outputs at most 22 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2~.+ & socket:type2!=0)",
+ "description": "Layer 'Charging stations' shows socket:type2:output=22 kW with a fixed text, namely 'Type 2 (mennekes) outputs at most 22 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2~.+ & socket:type2!=0)",
"value": "22 kW"
},
{
@@ -1116,13 +1116,13 @@
},
{
"key": "socket:type2_combo:voltage",
- "description": "Layer 'Charging stations' shows socket:type2_combo:voltage=500 V with a fixed text, namely 'Type 2 CCS (mennekes) outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
- "value": "500 V"
+ "description": "Layer 'Charging stations' shows socket:type2_combo:voltage=500 with a fixed text, namely 'Type 2 CCS (mennekes) outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "value": "500"
},
{
"key": "socket:type2_combo:voltage",
- "description": "Layer 'Charging stations' shows socket:type2_combo:voltage=920 V with a fixed text, namely 'Type 2 CCS (mennekes) outputs 920 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
- "value": "920 V"
+ "description": "Layer 'Charging stations' shows socket:type2_combo:voltage=920 with a fixed text, namely 'Type 2 CCS (mennekes) outputs 920 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "value": "920"
},
{
"key": "socket:type2_combo:current",
@@ -1130,13 +1130,13 @@
},
{
"key": "socket:type2_combo:current",
- "description": "Layer 'Charging stations' shows socket:type2_combo:current=125 A with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
- "value": "125 A"
+ "description": "Layer 'Charging stations' shows socket:type2_combo:current=125 with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "value": "125"
},
{
"key": "socket:type2_combo:current",
- "description": "Layer 'Charging stations' shows socket:type2_combo:current=350 A with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
- "value": "350 A"
+ "description": "Layer 'Charging stations' shows socket:type2_combo:current=350 with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "value": "350"
},
{
"key": "socket:type2_combo:output",
@@ -1144,7 +1144,7 @@
},
{
"key": "socket:type2_combo:output",
- "description": "Layer 'Charging stations' shows socket:type2_combo:output=50 kW with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 50 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
+ "description": "Layer 'Charging stations' shows socket:type2_combo:output=50 kW with a fixed text, namely 'Type 2 CCS (mennekes) outputs at most 50 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_combo~.+ & socket:type2_combo!=0)",
"value": "50 kW"
},
{
@@ -1157,13 +1157,13 @@
},
{
"key": "socket:type2_cable:voltage",
- "description": "Layer 'Charging stations' shows socket:type2_cable:voltage=230 V with a fixed text, namely 'Type 2 with cable (mennekes) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:type2_cable:voltage=230 with a fixed text, namely 'Type 2 with cable (mennekes) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "value": "230"
},
{
"key": "socket:type2_cable:voltage",
- "description": "Layer 'Charging stations' shows socket:type2_cable:voltage=400 V with a fixed text, namely 'Type 2 with cable (mennekes) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
- "value": "400 V"
+ "description": "Layer 'Charging stations' shows socket:type2_cable:voltage=400 with a fixed text, namely 'Type 2 with cable (mennekes) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "value": "400"
},
{
"key": "socket:type2_cable:current",
@@ -1171,13 +1171,13 @@
},
{
"key": "socket:type2_cable:current",
- "description": "Layer 'Charging stations' shows socket:type2_cable:current=16 A with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
- "value": "16 A"
+ "description": "Layer 'Charging stations' shows socket:type2_cable:current=16 with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "value": "16"
},
{
"key": "socket:type2_cable:current",
- "description": "Layer 'Charging stations' shows socket:type2_cable:current=32 A with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
- "value": "32 A"
+ "description": "Layer 'Charging stations' shows socket:type2_cable:current=32 with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "value": "32"
},
{
"key": "socket:type2_cable:output",
@@ -1185,12 +1185,12 @@
},
{
"key": "socket:type2_cable:output",
- "description": "Layer 'Charging stations' shows socket:type2_cable:output=11 kW with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 11 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "description": "Layer 'Charging stations' shows socket:type2_cable:output=11 kW with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 11 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
"value": "11 kW"
},
{
"key": "socket:type2_cable:output",
- "description": "Layer 'Charging stations' shows socket:type2_cable:output=22 kW with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 22 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
+ "description": "Layer 'Charging stations' shows socket:type2_cable:output=22 kW with a fixed text, namely 'Type 2 with cable (mennekes) outputs at most 22 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:type2_cable~.+ & socket:type2_cable!=0)",
"value": "22 kW"
},
{
@@ -1203,13 +1203,13 @@
},
{
"key": "socket:tesla_supercharger_ccs:voltage",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:voltage=500 V with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
- "value": "500 V"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:voltage=500 with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs 500 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "value": "500"
},
{
"key": "socket:tesla_supercharger_ccs:voltage",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:voltage=920 V with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs 920 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
- "value": "920 V"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:voltage=920 with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs 920 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "value": "920"
},
{
"key": "socket:tesla_supercharger_ccs:current",
@@ -1217,13 +1217,13 @@
},
{
"key": "socket:tesla_supercharger_ccs:current",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:current=125 A with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
- "value": "125 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:current=125 with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "value": "125"
},
{
"key": "socket:tesla_supercharger_ccs:current",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:current=350 A with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
- "value": "350 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:current=350 with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "value": "350"
},
{
"key": "socket:tesla_supercharger_ccs:output",
@@ -1231,7 +1231,7 @@
},
{
"key": "socket:tesla_supercharger_ccs:output",
- "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:output=50 kW with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 50 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_supercharger_ccs:output=50 kW with a fixed text, namely 'Tesla Supercharger CCS (a branded type2_css) outputs at most 50 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0)",
"value": "50 kW"
},
{
@@ -1244,8 +1244,8 @@
},
{
"key": "socket:tesla_destination:voltage",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:voltage=480 V with a fixed text, namely 'Tesla Supercharger (destination) outputs 480 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "480 V"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:voltage=480 with a fixed text, namely 'Tesla Supercharger (destination) outputs 480 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "480"
},
{
"key": "socket:tesla_destination:current",
@@ -1253,13 +1253,13 @@
},
{
"key": "socket:tesla_destination:current",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:current=125 A with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "125 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:current=125 with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 125 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "125"
},
{
"key": "socket:tesla_destination:current",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:current=350 A with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "350 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:current=350 with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 350 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "350"
},
{
"key": "socket:tesla_destination:output",
@@ -1267,17 +1267,17 @@
},
{
"key": "socket:tesla_destination:output",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:output=120 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 120 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:output=120 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 120 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
"value": "120 kW"
},
{
"key": "socket:tesla_destination:output",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:output=150 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 150 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:output=150 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 150 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
"value": "150 kW"
},
{
"key": "socket:tesla_destination:output",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:output=250 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 250 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:output=250 kW with a fixed text, namely 'Tesla Supercharger (destination) outputs at most 250 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
"value": "250 kW"
},
{
@@ -1290,13 +1290,13 @@
},
{
"key": "socket:tesla_destination:voltage",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:voltage=230 V with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:voltage=230 with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "230"
},
{
"key": "socket:tesla_destination:voltage",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:voltage=400 V with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "400 V"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:voltage=400 with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 400 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "400"
},
{
"key": "socket:tesla_destination:current",
@@ -1304,13 +1304,13 @@
},
{
"key": "socket:tesla_destination:current",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:current=16 A with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "16 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:current=16 with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "16"
},
{
"key": "socket:tesla_destination:current",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:current=32 A with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
- "value": "32 A"
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:current=32 with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 32 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "value": "32"
},
{
"key": "socket:tesla_destination:output",
@@ -1318,12 +1318,12 @@
},
{
"key": "socket:tesla_destination:output",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:output=11 kW with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 11 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:output=11 kW with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 11 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
"value": "11 kW"
},
{
"key": "socket:tesla_destination:output",
- "description": "Layer 'Charging stations' shows socket:tesla_destination:output=22 kW with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 22 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
+ "description": "Layer 'Charging stations' shows socket:tesla_destination:output=22 kW with a fixed text, namely 'Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 22 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:tesla_destination~.+ & socket:tesla_destination!=0)",
"value": "22 kW"
},
{
@@ -1336,8 +1336,8 @@
},
{
"key": "socket:USB-A:voltage",
- "description": "Layer 'Charging stations' shows socket:USB-A:voltage=5 V with a fixed text, namely 'USB to charge phones and small electronics outputs 5 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
- "value": "5 V"
+ "description": "Layer 'Charging stations' shows socket:USB-A:voltage=5 with a fixed text, namely 'USB to charge phones and small electronics outputs 5 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "value": "5"
},
{
"key": "socket:USB-A:current",
@@ -1345,13 +1345,13 @@
},
{
"key": "socket:USB-A:current",
- "description": "Layer 'Charging stations' shows socket:USB-A:current=1 A with a fixed text, namely 'USB to charge phones and small electronics outputs at most 1 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
- "value": "1 A"
+ "description": "Layer 'Charging stations' shows socket:USB-A:current=1 with a fixed text, namely 'USB to charge phones and small electronics outputs at most 1 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "value": "1"
},
{
"key": "socket:USB-A:current",
- "description": "Layer 'Charging stations' shows socket:USB-A:current=2 A with a fixed text, namely 'USB to charge phones and small electronics outputs at most 2 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
- "value": "2 A"
+ "description": "Layer 'Charging stations' shows socket:USB-A:current=2 with a fixed text, namely 'USB to charge phones and small electronics outputs at most 2 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "value": "2"
},
{
"key": "socket:USB-A:output",
@@ -1359,12 +1359,12 @@
},
{
"key": "socket:USB-A:output",
- "description": "Layer 'Charging stations' shows socket:USB-A:output=5W with a fixed text, namely 'USB to charge phones and small electronics outputs at most 5W A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "description": "Layer 'Charging stations' shows socket:USB-A:output=5W with a fixed text, namely 'USB to charge phones and small electronics outputs at most 5W' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
"value": "5W"
},
{
"key": "socket:USB-A:output",
- "description": "Layer 'Charging stations' shows socket:USB-A:output=10W with a fixed text, namely 'USB to charge phones and small electronics outputs at most 10W A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
+ "description": "Layer 'Charging stations' shows socket:USB-A:output=10W with a fixed text, namely 'USB to charge phones and small electronics outputs at most 10W' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:USB-A~.+ & socket:USB-A!=0)",
"value": "10W"
},
{
@@ -1409,8 +1409,8 @@
},
{
"key": "socket:bs1363:voltage",
- "description": "Layer 'Charging stations' shows socket:bs1363:voltage=230 V with a fixed text, namely 'BS1363 (Type G) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:bs1363:voltage=230 with a fixed text, namely 'BS1363 (Type G) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
+ "value": "230"
},
{
"key": "socket:bs1363:current",
@@ -1418,8 +1418,8 @@
},
{
"key": "socket:bs1363:current",
- "description": "Layer 'Charging stations' shows socket:bs1363:current=13 A with a fixed text, namely 'BS1363 (Type G) outputs at most 13 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
- "value": "13 A"
+ "description": "Layer 'Charging stations' shows socket:bs1363:current=13 with a fixed text, namely 'BS1363 (Type G) outputs at most 13 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
+ "value": "13"
},
{
"key": "socket:bs1363:output",
@@ -1427,7 +1427,7 @@
},
{
"key": "socket:bs1363:output",
- "description": "Layer 'Charging stations' shows socket:bs1363:output=3kW with a fixed text, namely 'BS1363 (Type G) outputs at most 3kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
+ "description": "Layer 'Charging stations' shows socket:bs1363:output=3kW with a fixed text, namely 'BS1363 (Type G) outputs at most 3kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:bs1363~.+ & socket:bs1363!=0)",
"value": "3kW"
},
{
@@ -1440,8 +1440,8 @@
},
{
"key": "socket:nema5_15:voltage",
- "description": "Layer 'Charging stations' shows socket:nema5_15:voltage=120 V with a fixed text, namely 'NEMA 5-15 (Type B) outputs 120 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
- "value": "120 V"
+ "description": "Layer 'Charging stations' shows socket:nema5_15:voltage=120 with a fixed text, namely 'NEMA 5-15 (Type B) outputs 120 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
+ "value": "120"
},
{
"key": "socket:nema5_15:current",
@@ -1449,8 +1449,8 @@
},
{
"key": "socket:nema5_15:current",
- "description": "Layer 'Charging stations' shows socket:nema5_15:current=15 A with a fixed text, namely 'NEMA 5-15 (Type B) outputs at most 15 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
- "value": "15 A"
+ "description": "Layer 'Charging stations' shows socket:nema5_15:current=15 with a fixed text, namely 'NEMA 5-15 (Type B) outputs at most 15 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
+ "value": "15"
},
{
"key": "socket:nema5_15:output",
@@ -1458,7 +1458,7 @@
},
{
"key": "socket:nema5_15:output",
- "description": "Layer 'Charging stations' shows socket:nema5_15:output=1.8 kW with a fixed text, namely 'NEMA 5-15 (Type B) outputs at most 1.8 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
+ "description": "Layer 'Charging stations' shows socket:nema5_15:output=1.8 kW with a fixed text, namely 'NEMA 5-15 (Type B) outputs at most 1.8 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:nema5_15~.+ & socket:nema5_15!=0)",
"value": "1.8 kW"
},
{
@@ -1471,8 +1471,8 @@
},
{
"key": "socket:sev1011_t23:voltage",
- "description": "Layer 'Charging stations' shows socket:sev1011_t23:voltage=230 V with a fixed text, namely 'SEV 1011 T23 (Type J) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:sev1011_t23:voltage=230 with a fixed text, namely 'SEV 1011 T23 (Type J) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
+ "value": "230"
},
{
"key": "socket:sev1011_t23:current",
@@ -1480,8 +1480,8 @@
},
{
"key": "socket:sev1011_t23:current",
- "description": "Layer 'Charging stations' shows socket:sev1011_t23:current=16 A with a fixed text, namely 'SEV 1011 T23 (Type J) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
- "value": "16 A"
+ "description": "Layer 'Charging stations' shows socket:sev1011_t23:current=16 with a fixed text, namely 'SEV 1011 T23 (Type J) outputs at most 16 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
+ "value": "16"
},
{
"key": "socket:sev1011_t23:output",
@@ -1489,7 +1489,7 @@
},
{
"key": "socket:sev1011_t23:output",
- "description": "Layer 'Charging stations' shows socket:sev1011_t23:output=3.7 kW with a fixed text, namely 'SEV 1011 T23 (Type J) outputs at most 3.7 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
+ "description": "Layer 'Charging stations' shows socket:sev1011_t23:output=3.7 kW with a fixed text, namely 'SEV 1011 T23 (Type J) outputs at most 3.7 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:sev1011_t23~.+ & socket:sev1011_t23!=0)",
"value": "3.7 kW"
},
{
@@ -1502,8 +1502,8 @@
},
{
"key": "socket:as3112:voltage",
- "description": "Layer 'Charging stations' shows socket:as3112:voltage=230 V with a fixed text, namely 'AS3112 (Type I) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
- "value": "230 V"
+ "description": "Layer 'Charging stations' shows socket:as3112:voltage=230 with a fixed text, namely 'AS3112 (Type I) outputs 230 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
+ "value": "230"
},
{
"key": "socket:as3112:current",
@@ -1511,8 +1511,8 @@
},
{
"key": "socket:as3112:current",
- "description": "Layer 'Charging stations' shows socket:as3112:current=10 A with a fixed text, namely 'AS3112 (Type I) outputs at most 10 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
- "value": "10 A"
+ "description": "Layer 'Charging stations' shows socket:as3112:current=10 with a fixed text, namely 'AS3112 (Type I) outputs at most 10 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
+ "value": "10"
},
{
"key": "socket:as3112:output",
@@ -1520,7 +1520,7 @@
},
{
"key": "socket:as3112:output",
- "description": "Layer 'Charging stations' shows socket:as3112:output=2.3 kW with a fixed text, namely 'AS3112 (Type I) outputs at most 2.3 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
+ "description": "Layer 'Charging stations' shows socket:as3112:output=2.3 kW with a fixed text, namely 'AS3112 (Type I) outputs at most 2.3 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:as3112~.+ & socket:as3112!=0)",
"value": "2.3 kW"
},
{
@@ -1533,8 +1533,8 @@
},
{
"key": "socket:nema_5_20:voltage",
- "description": "Layer 'Charging stations' shows socket:nema_5_20:voltage=120 V with a fixed text, namely 'NEMA 5-20 (Type B) outputs 120 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
- "value": "120 V"
+ "description": "Layer 'Charging stations' shows socket:nema_5_20:voltage=120 with a fixed text, namely 'NEMA 5-20 (Type B) outputs 120 volt' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
+ "value": "120"
},
{
"key": "socket:nema_5_20:current",
@@ -1542,8 +1542,8 @@
},
{
"key": "socket:nema_5_20:current",
- "description": "Layer 'Charging stations' shows socket:nema_5_20:current=20 A with a fixed text, namely 'NEMA 5-20 (Type B) outputs at most 20 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
- "value": "20 A"
+ "description": "Layer 'Charging stations' shows socket:nema_5_20:current=20 with a fixed text, namely 'NEMA 5-20 (Type B) outputs at most 20 A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
+ "value": "20"
},
{
"key": "socket:nema_5_20:output",
@@ -1551,7 +1551,7 @@
},
{
"key": "socket:nema_5_20:output",
- "description": "Layer 'Charging stations' shows socket:nema_5_20:output=2.4 kW with a fixed text, namely 'NEMA 5-20 (Type B) outputs at most 2.4 kW A' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
+ "description": "Layer 'Charging stations' shows socket:nema_5_20:output=2.4 kW with a fixed text, namely 'NEMA 5-20 (Type B) outputs at most 2.4 kW' and allows to pick this as a default answer (in the mapcomplete.org theme 'Parking') (This is only shown if socket:nema_5_20~.+ & socket:nema_5_20!=0)",
"value": "2.4 kW"
},
{
diff --git a/Docs/TagInfo/mapcomplete_pets.json b/Docs/TagInfo/mapcomplete_pets.json
index b048cf93f..cec693505 100644
--- a/Docs/TagInfo/mapcomplete_pets.json
+++ b/Docs/TagInfo/mapcomplete_pets.json
@@ -1686,6 +1686,11 @@
"description": "Layer 'Dog-friendly shops' shows shop=wine with a fixed text, namely 'Wine Shop' and allows to pick this as a default answer (in the mapcomplete.org theme 'Veterinarians, dog parks and other pet-amenities') (This is only shown if craft=)",
"value": "wine"
},
+ {
+ "key": "disused:shop",
+ "description": "Layer 'Dog-friendly shops' shows disused:shop= with a fixed text, namely 'This shop is no longer used. It is vacant' and allows to pick this as a default answer (in the mapcomplete.org theme 'Veterinarians, dog parks and other pet-amenities') Picking this answer will delete the key disused:shop. (This is only shown if craft=)",
+ "value": ""
+ },
{
"key": "brand",
"description": "Layer 'Dog-friendly shops' shows and asks freeform values for key 'brand' (in the mapcomplete.org theme 'Veterinarians, dog parks and other pet-amenities')"
diff --git a/Docs/TagInfo/mapcomplete_postboxes.json b/Docs/TagInfo/mapcomplete_postboxes.json
index c05d7585e..2877858ad 100644
--- a/Docs/TagInfo/mapcomplete_postboxes.json
+++ b/Docs/TagInfo/mapcomplete_postboxes.json
@@ -1218,6 +1218,11 @@
"description": "Layer 'Shop' shows shop=wine with a fixed text, namely 'Wine Shop' and allows to pick this as a default answer (in the mapcomplete.org theme 'Postbox and Post Office Map') (This is only shown if craft=)",
"value": "wine"
},
+ {
+ "key": "disused:shop",
+ "description": "Layer 'Shop' shows disused:shop= with a fixed text, namely 'This shop is no longer used. It is vacant' and allows to pick this as a default answer (in the mapcomplete.org theme 'Postbox and Post Office Map') Picking this answer will delete the key disused:shop. (This is only shown if craft=)",
+ "value": ""
+ },
{
"key": "brand",
"description": "Layer 'Shop' shows and asks freeform values for key 'brand' (in the mapcomplete.org theme 'Postbox and Post Office Map')"
diff --git a/Docs/TagInfo/mapcomplete_scouting.json b/Docs/TagInfo/mapcomplete_scouting.json
new file mode 100644
index 000000000..6c6349c4d
--- /dev/null
+++ b/Docs/TagInfo/mapcomplete_scouting.json
@@ -0,0 +1,63 @@
+{
+ "data_format": 1,
+ "project": {
+ "name": "MapComplete Scouting groups",
+ "description": "A scouting group is a social youth movement with a heavy emphasis on the outdoors",
+ "project_url": "https://mapcomplete.org/scouting",
+ "doc_url": "https://github.com/pietervdvn/MapComplete/tree/master/assets/themes/",
+ "icon_url": "https://mapcomplete.org/assets/layers/scouting_group/scouting.svg",
+ "contact_name": "Pieter Vander Vennet",
+ "contact_email": "pietervdvn@posteo.net"
+ },
+ "tags": [
+ {
+ "key": "club",
+ "description": "The MapComplete theme Scouting groups has a layer Scouting groups showing features with this tag",
+ "value": "scout"
+ },
+ {
+ "key": "id",
+ "description": "Layer 'Scouting groups' shows id~.+ with a fixed text, namely 'You just created this element! Thanks for sharing this info with the world and helping people worldwide.' (in the mapcomplete.org theme 'Scouting groups') (This is only shown if _backend~.+ & _last_edit:passed_time<300 & (_version_number= | _version_number=1))"
+ },
+ {
+ "key": "name",
+ "description": "Layer 'Scouting groups' shows and asks freeform values for key 'name' (in the mapcomplete.org theme 'Scouting groups')"
+ },
+ {
+ "key": "brand",
+ "description": "Layer 'Scouting groups' shows and asks freeform values for key 'brand' (in the mapcomplete.org theme 'Scouting groups')"
+ },
+ {
+ "key": "phone",
+ "description": "Layer 'Scouting groups' shows and asks freeform values for key 'phone' (in the mapcomplete.org theme 'Scouting groups')"
+ },
+ {
+ "key": "contact:phone",
+ "description": "Layer 'Scouting groups' shows contact:phone~.+ with a fixed text, namely '{link(&LBRACEcontact:phone&RBRACE,tel:&LBRACEcontact:phone&RBRACE,,,,)}' (in the mapcomplete.org theme 'Scouting groups')"
+ },
+ {
+ "key": "email",
+ "description": "Layer 'Scouting groups' shows and asks freeform values for key 'email' (in the mapcomplete.org theme 'Scouting groups')"
+ },
+ {
+ "key": "contact:email",
+ "description": "Layer 'Scouting groups' shows contact:email~.+ with a fixed text, namely '{contact:email}' (in the mapcomplete.org theme 'Scouting groups')"
+ },
+ {
+ "key": "operator:email",
+ "description": "Layer 'Scouting groups' shows operator:email~.+ with a fixed text, namely '{operator:email}' (in the mapcomplete.org theme 'Scouting groups')"
+ },
+ {
+ "key": "website",
+ "description": "Layer 'Scouting groups' shows and asks freeform values for key 'website' (in the mapcomplete.org theme 'Scouting groups')"
+ },
+ {
+ "key": "contact:website",
+ "description": "Layer 'Scouting groups' shows contact:website~.+ with a fixed text, namely '{contact:website}' (in the mapcomplete.org theme 'Scouting groups')"
+ },
+ {
+ "key": "contact:mastodon",
+ "description": "Layer 'Scouting groups' shows and asks freeform values for key 'contact:mastodon' (in the mapcomplete.org theme 'Scouting groups')"
+ }
+ ]
+}
\ No newline at end of file
diff --git a/Docs/TagInfo/mapcomplete_shops.json b/Docs/TagInfo/mapcomplete_shops.json
index 5d59f7818..b64ffc63b 100644
--- a/Docs/TagInfo/mapcomplete_shops.json
+++ b/Docs/TagInfo/mapcomplete_shops.json
@@ -876,6 +876,11 @@
"description": "Layer 'Shop' shows shop=wine with a fixed text, namely 'Wine Shop' and allows to pick this as a default answer (in the mapcomplete.org theme 'Shops') (This is only shown if craft=)",
"value": "wine"
},
+ {
+ "key": "disused:shop",
+ "description": "Layer 'Shop' shows disused:shop= with a fixed text, namely 'This shop is no longer used. It is vacant' and allows to pick this as a default answer (in the mapcomplete.org theme 'Shops') Picking this answer will delete the key disused:shop. (This is only shown if craft=)",
+ "value": ""
+ },
{
"key": "brand",
"description": "Layer 'Shop' shows and asks freeform values for key 'brand' (in the mapcomplete.org theme 'Shops')"
diff --git a/Docs/TagInfo/mapcomplete_ski.json b/Docs/TagInfo/mapcomplete_ski.json
index 5055d6f47..e131702cd 100644
--- a/Docs/TagInfo/mapcomplete_ski.json
+++ b/Docs/TagInfo/mapcomplete_ski.json
@@ -773,6 +773,16 @@
"description": "Layer 'Drinking water' shows disused:amenity=drinking_water with a fixed text, namely 'This drinking water is permanently closed' and allows to pick this as a default answer (in the mapcomplete.org theme 'Ski pistes and aerialways')",
"value": "drinking_water"
},
+ {
+ "key": "fee",
+ "description": "Layer 'Drinking water' shows fee=no with a fixed text, namely 'Free to use' and allows to pick this as a default answer (in the mapcomplete.org theme 'Ski pistes and aerialways')",
+ "value": "no"
+ },
+ {
+ "key": "fee",
+ "description": "Layer 'Drinking water' shows fee=yes with a fixed text, namely 'One needs to pay to use this drinking water point' and allows to pick this as a default answer (in the mapcomplete.org theme 'Ski pistes and aerialways')",
+ "value": "yes"
+ },
{
"key": "fountain",
"description": "Layer 'Drinking water' shows fountain=bubbler with a fixed text, namely 'This is a bubbler fountain. A water jet to drink from is sent upwards, typically controlled by a push button.' and allows to pick this as a default answer (in the mapcomplete.org theme 'Ski pistes and aerialways')",
@@ -799,13 +809,28 @@
"value": "no"
},
{
- "key": "fee",
- "description": "Layer 'Drinking water' shows fee=no with a fixed text, namely 'Free to use' and allows to pick this as a default answer (in the mapcomplete.org theme 'Ski pistes and aerialways')",
- "value": "no"
+ "key": "iced_water",
+ "description": "Layer 'Drinking water' shows iced_water=yes with a fixed text, namely 'Ice-cold water is provided here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Ski pistes and aerialways')",
+ "value": "yes"
},
{
- "key": "fee",
- "description": "Layer 'Drinking water' shows fee=yes with a fixed text, namely 'One needs to pay to use this drinking water point' and allows to pick this as a default answer (in the mapcomplete.org theme 'Ski pistes and aerialways')",
+ "key": "cold_water",
+ "description": "Layer 'Drinking water' shows cold_water=yes with a fixed text, namely 'Actively cooled water is available here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Ski pistes and aerialways')",
+ "value": "yes"
+ },
+ {
+ "key": "room_temperature_water",
+ "description": "Layer 'Drinking water' shows room_temperature_water=yes with a fixed text, namely 'Ambient temperature water (without active cooling or heating) is available here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Ski pistes and aerialways')",
+ "value": "yes"
+ },
+ {
+ "key": "warm_water",
+ "description": "Layer 'Drinking water' shows warm_water=yes with a fixed text, namely 'Warmed water is provided here; the water is not dangerously hot' and allows to pick this as a default answer (in the mapcomplete.org theme 'Ski pistes and aerialways')",
+ "value": "yes"
+ },
+ {
+ "key": "hot_water",
+ "description": "Layer 'Drinking water' shows hot_water=yes with a fixed text, namely 'Hot water is provided here' and allows to pick this as a default answer (in the mapcomplete.org theme 'Ski pistes and aerialways')",
"value": "yes"
},
{
diff --git a/Docs/TagInfo/mapcomplete_sport_pitches.json b/Docs/TagInfo/mapcomplete_sport_pitches.json
index 8edf44f5a..78ac1cdd6 100644
--- a/Docs/TagInfo/mapcomplete_sport_pitches.json
+++ b/Docs/TagInfo/mapcomplete_sport_pitches.json
@@ -78,6 +78,11 @@
"description": "Layer 'Sport pitches' shows sport=skateboard with a fixed text, namely 'This is a skatepark' and allows to pick this as a default answer (in the mapcomplete.org theme 'Sport pitches')",
"value": "skateboard"
},
+ {
+ "key": "sport",
+ "description": "Layer 'Sport pitches' shows sport=equestrian with a fixed text, namely 'This is a horse riding arena' and allows to pick this as a default answer (in the mapcomplete.org theme 'Sport pitches')",
+ "value": "equestrian"
+ },
{
"key": "hoops",
"description": "Layer 'Sport pitches' shows hoops=1 with a fixed text, namely 'This basketball pitch has a single hoop' and allows to pick this as a default answer (in the mapcomplete.org theme 'Sport pitches') (This is only shown if sport~^((^|.*;)basketball(;.*|$))$)",
diff --git a/Docs/TagInfo/mapcomplete_sports.json b/Docs/TagInfo/mapcomplete_sports.json
index e1222af01..3f70cccdd 100644
--- a/Docs/TagInfo/mapcomplete_sports.json
+++ b/Docs/TagInfo/mapcomplete_sports.json
@@ -78,6 +78,11 @@
"description": "Layer 'Sport pitches' shows sport=skateboard with a fixed text, namely 'This is a skatepark' and allows to pick this as a default answer (in the mapcomplete.org theme 'Sports')",
"value": "skateboard"
},
+ {
+ "key": "sport",
+ "description": "Layer 'Sport pitches' shows sport=equestrian with a fixed text, namely 'This is a horse riding arena' and allows to pick this as a default answer (in the mapcomplete.org theme 'Sports')",
+ "value": "equestrian"
+ },
{
"key": "hoops",
"description": "Layer 'Sport pitches' shows hoops=1 with a fixed text, namely 'This basketball pitch has a single hoop' and allows to pick this as a default answer (in the mapcomplete.org theme 'Sports') (This is only shown if sport~^((^|.*;)basketball(;.*|$))$)",
@@ -2095,6 +2100,11 @@
"description": "Layer 'Shop' shows shop=wine with a fixed text, namely 'Wine Shop' and allows to pick this as a default answer (in the mapcomplete.org theme 'Sports') (This is only shown if craft=)",
"value": "wine"
},
+ {
+ "key": "disused:shop",
+ "description": "Layer 'Shop' shows disused:shop= with a fixed text, namely 'This shop is no longer used. It is vacant' and allows to pick this as a default answer (in the mapcomplete.org theme 'Sports') Picking this answer will delete the key disused:shop. (This is only shown if craft=)",
+ "value": ""
+ },
{
"key": "brand",
"description": "Layer 'Shop' shows and asks freeform values for key 'brand' (in the mapcomplete.org theme 'Sports')"
diff --git a/Docs/Themes/charging_stations.md b/Docs/Themes/charging_stations.md
index e264d2420..0ac3032af 100644
--- a/Docs/Themes/charging_stations.md
+++ b/Docs/Themes/charging_stations.md
@@ -9,6 +9,7 @@ The theme introduction reads:
This theme contains the following layers:
- [charging_station](../Layers/charging_station.md)
+ - [charge_point](../Layers/charge_point.md)
Available languages:
diff --git a/Docs/Themes/circular_economy.md b/Docs/Themes/circular_economy.md
index 192f8a949..7d4c58bae 100644
--- a/Docs/Themes/circular_economy.md
+++ b/Docs/Themes/circular_economy.md
@@ -333,6 +333,7 @@ The question is `What kind of shop is this?`
- *Wig Shop* is shown if with shop=wigs
- *Window Blind Store* is shown if with shop=window_blind
- *Wine Shop* is shown if with shop=wine
+ - *This shop is no longer used. It is vacant* is shown if with disused:shop=
This tagrendering has labels
`description`
@@ -907,6 +908,7 @@ This tagrendering has labels
| shop_types.162 | Wig Shop | shop=wigs |
| shop_types.163 | Window Blind Store | shop=window_blind |
| shop_types.164 | Wine Shop | shop=wine |
+| shop_types.165 | This shop is no longer used. It is vacant | disused:shop= | (shop=disused | shop=vacant | disused:shop~^(.+)$ | abandoned:shop~^(.+)$) |
| id | question | osmTags |
-----|-----|----- |
diff --git a/Docs/Themes/climbing.md b/Docs/Themes/climbing.md
index 158d8cd48..1fa0533c1 100644
--- a/Docs/Themes/climbing.md
+++ b/Docs/Themes/climbing.md
@@ -350,6 +350,7 @@ The question is `What kind of shop is this?`
- *Wig Shop* is shown if with shop=wigs
- *Window Blind Store* is shown if with shop=window_blind
- *Wine Shop* is shown if with shop=wine
+ - *This shop is no longer used. It is vacant* is shown if with disused:shop=
This tagrendering has labels
`description`
@@ -932,6 +933,7 @@ This tagrendering has labels
| shop_types.162 | Wig Shop | shop=wigs |
| shop_types.163 | Window Blind Store | shop=window_blind |
| shop_types.164 | Wine Shop | shop=wine |
+| shop_types.165 | This shop is no longer used. It is vacant | disused:shop= | (shop=disused | shop=vacant | disused:shop~^(.+)$ | abandoned:shop~^(.+)$) |
| id | question | osmTags |
-----|-----|----- |
diff --git a/Docs/Themes/cyclofix.md b/Docs/Themes/cyclofix.md
index 7e8ad5f6a..018df62fc 100644
--- a/Docs/Themes/cyclofix.md
+++ b/Docs/Themes/cyclofix.md
@@ -641,60 +641,60 @@ Elements must match **all** of the following expressions:
| [access](https://wiki.openstreetmap.org/wiki/Key:access) | [string](../SpecialInputElements.md#string) | [yes](https://wiki.openstreetmap.org/wiki/Tag:access%3Dyes) [customers](https://wiki.openstreetmap.org/wiki/Tag:access%3Dcustomers) [key](https://wiki.openstreetmap.org/wiki/Tag:access%3Dkey) [private](https://wiki.openstreetmap.org/wiki/Tag:access%3Dprivate) [permissive](https://wiki.openstreetmap.org/wiki/Tag:access%3Dpermissive) |
| [capacity](https://wiki.openstreetmap.org/wiki/Key:capacity) | [pnat](../SpecialInputElements.md#pnat) | |
| [socket:schuko](https://wiki.openstreetmap.org/wiki/Key:socket:schuko) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:schuko:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:voltage%3D230 V) |
-| [socket:schuko:current](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:current%3D16 A) |
+| [socket:schuko:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:voltage%3D230) |
+| [socket:schuko:current](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:current%3D16) |
| [socket:schuko:output](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3.6 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:output%3D3.6 kW) |
| [socket:typee](https://wiki.openstreetmap.org/wiki/Key:socket:typee) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:typee:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:typee:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:voltage%3D230 V) |
-| [socket:typee:current](https://wiki.openstreetmap.org/wiki/Key:socket:typee:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:current%3D16 A) |
+| [socket:typee:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:typee:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:voltage%3D230) |
+| [socket:typee:current](https://wiki.openstreetmap.org/wiki/Key:socket:typee:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:current%3D16) |
| [socket:typee:output](https://wiki.openstreetmap.org/wiki/Key:socket:typee:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:output%3D3 kW) [22 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:output%3D22 kW) |
| [socket:chademo](https://wiki.openstreetmap.org/wiki/Key:socket:chademo) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:chademo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500 V](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:voltage%3D500 V) |
-| [socket:chademo:current](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [120 A](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:current%3D120 A) |
+| [socket:chademo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:voltage%3D500) |
+| [socket:chademo:current](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [120](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:current%3D120) |
| [socket:chademo:output](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:output) | [pfloat](../SpecialInputElements.md#pfloat) | [50 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:output%3D50 kW) |
| [socket:type1_cable](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type1_cable:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [200 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:voltage%3D200 V) [240 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:voltage%3D240 V) |
-| [socket:type1_cable:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:current) | [pfloat](../SpecialInputElements.md#pfloat) | [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:current%3D32 A) |
+| [socket:type1_cable:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [200](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:voltage%3D200) [240](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:voltage%3D240) |
+| [socket:type1_cable:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:current) | [pfloat](../SpecialInputElements.md#pfloat) | [32](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:current%3D32) |
| [socket:type1_cable:output](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3.7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:output%3D3.7 kW) [7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:output%3D7 kW) |
| [socket:type1](https://wiki.openstreetmap.org/wiki/Key:socket:type1) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type1:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [200 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:voltage%3D200 V) [240 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:voltage%3D240 V) |
-| [socket:type1:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1:current) | [pfloat](../SpecialInputElements.md#pfloat) | [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:current%3D32 A) |
+| [socket:type1:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [200](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:voltage%3D200) [240](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:voltage%3D240) |
+| [socket:type1:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1:current) | [pfloat](../SpecialInputElements.md#pfloat) | [32](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:current%3D32) |
| [socket:type1:output](https://wiki.openstreetmap.org/wiki/Key:socket:type1:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3.7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:output%3D3.7 kW) [6.6 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:output%3D6.6 kW) [7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:output%3D7 kW) [7.2 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:output%3D7.2 kW) |
| [socket:type1_combo](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type1_combo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [400 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:voltage%3D400 V) [1000 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:voltage%3D1000 V) |
-| [socket:type1_combo:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [50 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:current%3D50 A) [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:current%3D125 A) |
+| [socket:type1_combo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [400](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:voltage%3D400) [1000](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:voltage%3D1000) |
+| [socket:type1_combo:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [50](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:current%3D50) [125](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:current%3D125) |
| [socket:type1_combo:output](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:output) | [pfloat](../SpecialInputElements.md#pfloat) | [50 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:output%3D50 kW) [62.5 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:output%3D62.5 kW) [150 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:output%3D150 kW) [350 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:output%3D350 kW) |
| [socket:tesla_supercharger](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:tesla_supercharger:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [480 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:voltage%3D480 V) |
-| [socket:tesla_supercharger:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:current%3D125 A) [350 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:current%3D350 A) |
+| [socket:tesla_supercharger:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [480](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:voltage%3D480) |
+| [socket:tesla_supercharger:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:current%3D125) [350](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:current%3D350) |
| [socket:tesla_supercharger:output](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:output) | [pfloat](../SpecialInputElements.md#pfloat) | [120 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:output%3D120 kW) [150 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:output%3D150 kW) [250 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:output%3D250 kW) |
| [socket:type2](https://wiki.openstreetmap.org/wiki/Key:socket:type2) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type2:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:voltage%3D230 V) [400 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:voltage%3D400 V) |
-| [socket:type2:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:current%3D16 A) [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:current%3D32 A) |
+| [socket:type2:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:voltage%3D230) [400](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:voltage%3D400) |
+| [socket:type2:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:current%3D16) [32](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:current%3D32) |
| [socket:type2:output](https://wiki.openstreetmap.org/wiki/Key:socket:type2:output) | [pfloat](../SpecialInputElements.md#pfloat) | [11 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:output%3D11 kW) [22 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:output%3D22 kW) |
| [socket:type2_combo](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type2_combo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:voltage%3D500 V) [920 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:voltage%3D920 V) |
-| [socket:type2_combo:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:current%3D125 A) [350 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:current%3D350 A) |
+| [socket:type2_combo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:voltage%3D500) [920](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:voltage%3D920) |
+| [socket:type2_combo:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:current%3D125) [350](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:current%3D350) |
| [socket:type2_combo:output](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:output) | [pfloat](../SpecialInputElements.md#pfloat) | [50 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:output%3D50 kW) |
| [socket:type2_cable](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type2_cable:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:voltage%3D230 V) [400 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:voltage%3D400 V) |
-| [socket:type2_cable:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:current%3D16 A) [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:current%3D32 A) |
+| [socket:type2_cable:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:voltage%3D230) [400](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:voltage%3D400) |
+| [socket:type2_cable:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:current%3D16) [32](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:current%3D32) |
| [socket:type2_cable:output](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:output) | [pfloat](../SpecialInputElements.md#pfloat) | [11 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:output%3D11 kW) [22 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:output%3D22 kW) |
| [socket:tesla_supercharger_ccs](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:tesla_supercharger_ccs:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:voltage%3D500 V) [920 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:voltage%3D920 V) |
-| [socket:tesla_supercharger_ccs:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:current%3D125 A) [350 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:current%3D350 A) |
+| [socket:tesla_supercharger_ccs:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:voltage%3D500) [920](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:voltage%3D920) |
+| [socket:tesla_supercharger_ccs:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:current%3D125) [350](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:current%3D350) |
| [socket:tesla_supercharger_ccs:output](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:output) | [pfloat](../SpecialInputElements.md#pfloat) | [50 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:output%3D50 kW) |
| [socket:tesla_destination](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:tesla_destination:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [480 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D480 V) |
-| [socket:tesla_destination:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D125 A) [350 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D350 A) |
+| [socket:tesla_destination:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [480](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D480) |
+| [socket:tesla_destination:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D125) [350](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D350) |
| [socket:tesla_destination:output](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:output) | [pfloat](../SpecialInputElements.md#pfloat) | [120 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D120 kW) [150 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D150 kW) [250 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D250 kW) |
| [socket:tesla_destination](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:tesla_destination:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D230 V) [400 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D400 V) |
-| [socket:tesla_destination:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D16 A) [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D32 A) |
+| [socket:tesla_destination:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D230) [400](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D400) |
+| [socket:tesla_destination:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D16) [32](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D32) |
| [socket:tesla_destination:output](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:output) | [pfloat](../SpecialInputElements.md#pfloat) | [11 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D11 kW) [22 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D22 kW) |
| [socket:USB-A](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:USB-A:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [5 V](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:voltage%3D5 V) |
-| [socket:USB-A:current](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:current) | [pfloat](../SpecialInputElements.md#pfloat) | [1 A](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:current%3D1 A) [2 A](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:current%3D2 A) |
+| [socket:USB-A:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [5](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:voltage%3D5) |
+| [socket:USB-A:current](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:current) | [pfloat](../SpecialInputElements.md#pfloat) | [1](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:current%3D1) [2](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:current%3D2) |
| [socket:USB-A:output](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:output) | [pfloat](../SpecialInputElements.md#pfloat) | [5W](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:output%3D5W) [10W](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:output%3D10W) |
| [socket:bosch_3pin](https://wiki.openstreetmap.org/wiki/Key:socket:bosch_3pin) | [pnat](../SpecialInputElements.md#pnat) | |
| [socket:bosch_3pin:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:bosch_3pin:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | |
@@ -705,24 +705,24 @@ Elements must match **all** of the following expressions:
| [socket:bosch_5pin:current](https://wiki.openstreetmap.org/wiki/Key:socket:bosch_5pin:current) | [pfloat](../SpecialInputElements.md#pfloat) | |
| [socket:bosch_5pin:output](https://wiki.openstreetmap.org/wiki/Key:socket:bosch_5pin:output) | [pfloat](../SpecialInputElements.md#pfloat) | |
| [socket:bs1363](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:bs1363:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:voltage%3D230 V) |
-| [socket:bs1363:current](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:current) | [pfloat](../SpecialInputElements.md#pfloat) | [13 A](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:current%3D13 A) |
+| [socket:bs1363:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:voltage%3D230) |
+| [socket:bs1363:current](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:current) | [pfloat](../SpecialInputElements.md#pfloat) | [13](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:current%3D13) |
| [socket:bs1363:output](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3kW](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:output%3D3kW) |
| [socket:nema5_15](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:nema5_15:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [120 V](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:voltage%3D120 V) |
-| [socket:nema5_15:current](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:current) | [pfloat](../SpecialInputElements.md#pfloat) | [15 A](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:current%3D15 A) |
+| [socket:nema5_15:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [120](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:voltage%3D120) |
+| [socket:nema5_15:current](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:current) | [pfloat](../SpecialInputElements.md#pfloat) | [15](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:current%3D15) |
| [socket:nema5_15:output](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:output) | [pfloat](../SpecialInputElements.md#pfloat) | [1.8 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:output%3D1.8 kW) |
| [socket:sev1011_t23](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:sev1011_t23:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:voltage%3D230 V) |
-| [socket:sev1011_t23:current](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:current%3D16 A) |
+| [socket:sev1011_t23:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:voltage%3D230) |
+| [socket:sev1011_t23:current](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:current%3D16) |
| [socket:sev1011_t23:output](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3.7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:output%3D3.7 kW) |
| [socket:as3112](https://wiki.openstreetmap.org/wiki/Key:socket:as3112) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:as3112:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:voltage%3D230 V) |
-| [socket:as3112:current](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:current) | [pfloat](../SpecialInputElements.md#pfloat) | [10 A](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:current%3D10 A) |
+| [socket:as3112:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:voltage%3D230) |
+| [socket:as3112:current](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:current) | [pfloat](../SpecialInputElements.md#pfloat) | [10](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:current%3D10) |
| [socket:as3112:output](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:output) | [pfloat](../SpecialInputElements.md#pfloat) | [2.3 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:output%3D2.3 kW) |
| [socket:nema_5_20](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:nema_5_20:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [120 V](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:voltage%3D120 V) |
-| [socket:nema_5_20:current](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:current) | [pfloat](../SpecialInputElements.md#pfloat) | [20 A](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:current%3D20 A) |
+| [socket:nema_5_20:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [120](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:voltage%3D120) |
+| [socket:nema_5_20:current](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:current) | [pfloat](../SpecialInputElements.md#pfloat) | [20](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:current%3D20) |
| [socket:nema_5_20:output](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:output) | [pfloat](../SpecialInputElements.md#pfloat) | [2.4 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:output%3D2.4 kW) |
| [opening_hours](https://wiki.openstreetmap.org/wiki/Key:opening_hours) | [opening_hours](../SpecialInputElements.md#opening_hours) | [24/7](https://wiki.openstreetmap.org/wiki/Tag:opening_hours%3D24/7) |
| [fee](https://wiki.openstreetmap.org/wiki/Key:fee) | Multiple choice | [no](https://wiki.openstreetmap.org/wiki/Tag:fee%3Dno) [no](https://wiki.openstreetmap.org/wiki/Tag:fee%3Dno) [yes](https://wiki.openstreetmap.org/wiki/Tag:fee%3Dyes) [yes](https://wiki.openstreetmap.org/wiki/Tag:fee%3Dyes) |
@@ -824,13 +824,15 @@ The question is `How much plugs of type Schuko wall plug without ground p
*There are {socket:schuko} plugs of type Schuko wall plug without ground pin (CEE7/4 type F) available here* is shown if `socket:schuko` is set
This tagrendering is only visible in the popup if the following condition is met: socket:schuko~.+ & socket:schuko!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:schuko
The question is `What voltage do the plugs with Schuko wall plug without ground pin (CEE7/4 type F) offer?`
*Schuko wall plug without ground pin (CEE7/4 type F) outputs {canonical(socket:schuko:voltage)}* is shown if `socket:schuko:voltage` is set
- - *Schuko wall plug without ground pin (CEE7/4 type F) outputs 230 volt* is shown if with socket:schuko:voltage=230 V
+ - *Schuko wall plug without ground pin (CEE7/4 type F) outputs 230 volt* is shown if with socket:schuko:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:schuko~.+ & socket:schuko!=0
This tagrendering has labels
@@ -841,7 +843,7 @@ This tagrendering has labels
The question is `What current do the plugs with Schuko wall plug without ground pin (CEE7/4 type F) offer?`
*Schuko wall plug without ground pin (CEE7/4 type F) outputs at most {canonical(socket:schuko:current)}* is shown if `socket:schuko:current` is set
- - *Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 16 A* is shown if with socket:schuko:current=16 A
+ - *Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 16 A* is shown if with socket:schuko:current=16
This tagrendering is only visible in the popup if the following condition is met: socket:schuko~.+ & socket:schuko!=0
This tagrendering has labels
@@ -852,7 +854,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type Schuko wall plug without ground pin (CEE7/4 type F) offer?`
*Schuko wall plug without ground pin (CEE7/4 type F) outputs at most {canonical(socket:schuko:output)}* is shown if `socket:schuko:output` is set
- - *Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 3.6 kW A* is shown if with socket:schuko:output=3.6 kW
+ - *Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 3.6 kW* is shown if with socket:schuko:output=3.6 kW
This tagrendering is only visible in the popup if the following condition is met: socket:schuko~.+ & socket:schuko!=0
This tagrendering has labels
@@ -864,13 +866,15 @@ The question is `How much plugs of type European wall plug with ground pi
*There are {socket:typee} plugs of type European wall plug with ground pin (CEE7/4 type E) available here* is shown if `socket:typee` is set
This tagrendering is only visible in the popup if the following condition is met: socket:typee~.+ & socket:typee!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:typee
The question is `What voltage do the plugs with European wall plug with ground pin (CEE7/4 type E) offer?`
*European wall plug with ground pin (CEE7/4 type E) outputs {canonical(socket:typee:voltage)}* is shown if `socket:typee:voltage` is set
- - *European wall plug with ground pin (CEE7/4 type E) outputs 230 volt* is shown if with socket:typee:voltage=230 V
+ - *European wall plug with ground pin (CEE7/4 type E) outputs 230 volt* is shown if with socket:typee:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:typee~.+ & socket:typee!=0
This tagrendering has labels
@@ -881,7 +885,7 @@ This tagrendering has labels
The question is `What current do the plugs with European wall plug with ground pin (CEE7/4 type E) offer?`
*European wall plug with ground pin (CEE7/4 type E) outputs at most {canonical(socket:typee:current)}* is shown if `socket:typee:current` is set
- - *European wall plug with ground pin (CEE7/4 type E) outputs at most 16 A* is shown if with socket:typee:current=16 A
+ - *European wall plug with ground pin (CEE7/4 type E) outputs at most 16 A* is shown if with socket:typee:current=16
This tagrendering is only visible in the popup if the following condition is met: socket:typee~.+ & socket:typee!=0
This tagrendering has labels
@@ -892,8 +896,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type European wall plug with ground pin (CEE7/4 type E) offer?`
*European wall plug with ground pin (CEE7/4 type E) outputs at most {canonical(socket:typee:output)}* is shown if `socket:typee:output` is set
- - *European wall plug with ground pin (CEE7/4 type E) outputs at most 3 kW A* is shown if with socket:typee:output=3 kW
- - *European wall plug with ground pin (CEE7/4 type E) outputs at most 22 kW A* is shown if with socket:typee:output=22 kW
+ - *European wall plug with ground pin (CEE7/4 type E) outputs at most 3 kW* is shown if with socket:typee:output=3 kW
+ - *European wall plug with ground pin (CEE7/4 type E) outputs at most 22 kW* is shown if with socket:typee:output=22 kW
This tagrendering is only visible in the popup if the following condition is met: socket:typee~.+ & socket:typee!=0
This tagrendering has labels
@@ -905,13 +909,15 @@ The question is `How much plugs of type Chademo are available here?`
*There are {socket:chademo} plugs of type Chademo available here* is shown if `socket:chademo` is set
This tagrendering is only visible in the popup if the following condition is met: socket:chademo~.+ & socket:chademo!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:chademo
The question is `What voltage do the plugs with Chademo offer?`
*Chademo outputs {canonical(socket:chademo:voltage)}* is shown if `socket:chademo:voltage` is set
- - *Chademo outputs 500 volt* is shown if with socket:chademo:voltage=500 V
+ - *Chademo outputs 500 volt* is shown if with socket:chademo:voltage=500
This tagrendering is only visible in the popup if the following condition is met: socket:chademo~.+ & socket:chademo!=0
This tagrendering has labels
@@ -922,7 +928,7 @@ This tagrendering has labels
The question is `What current do the plugs with Chademo offer?`
*Chademo outputs at most {canonical(socket:chademo:current)}* is shown if `socket:chademo:current` is set
- - *Chademo outputs at most 120 A* is shown if with socket:chademo:current=120 A
+ - *Chademo outputs at most 120 A* is shown if with socket:chademo:current=120
This tagrendering is only visible in the popup if the following condition is met: socket:chademo~.+ & socket:chademo!=0
This tagrendering has labels
@@ -933,7 +939,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type Chademo offer?`
*Chademo outputs at most {canonical(socket:chademo:output)}* is shown if `socket:chademo:output` is set
- - *Chademo outputs at most 50 kW A* is shown if with socket:chademo:output=50 kW
+ - *Chademo outputs at most 50 kW* is shown if with socket:chademo:output=50 kW
This tagrendering is only visible in the popup if the following condition is met: socket:chademo~.+ & socket:chademo!=0
This tagrendering has labels
@@ -945,14 +951,16 @@ The question is `How much plugs of type Type 1 with cable (J1772) are ava
*There are {socket:type1_cable} plugs of type Type 1 with cable (J1772) available here* is shown if `socket:type1_cable` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type1_cable~.+ & socket:type1_cable!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type1_cable
The question is `What voltage do the plugs with Type 1 with cable (J1772) offer?`
*Type 1 with cable (J1772) outputs {canonical(socket:type1_cable:voltage)}* is shown if `socket:type1_cable:voltage` is set
- - *Type 1 with cable (J1772) outputs 200 volt* is shown if with socket:type1_cable:voltage=200 V
- - *Type 1 with cable (J1772) outputs 240 volt* is shown if with socket:type1_cable:voltage=240 V
+ - *Type 1 with cable (J1772) outputs 200 volt* is shown if with socket:type1_cable:voltage=200
+ - *Type 1 with cable (J1772) outputs 240 volt* is shown if with socket:type1_cable:voltage=240
This tagrendering is only visible in the popup if the following condition is met: socket:type1_cable~.+ & socket:type1_cable!=0
This tagrendering has labels
@@ -963,7 +971,7 @@ This tagrendering has labels
The question is `What current do the plugs with Type 1 with cable (J1772) offer?`
*Type 1 with cable (J1772) outputs at most {canonical(socket:type1_cable:current)}* is shown if `socket:type1_cable:current` is set
- - *Type 1 with cable (J1772) outputs at most 32 A* is shown if with socket:type1_cable:current=32 A
+ - *Type 1 with cable (J1772) outputs at most 32 A* is shown if with socket:type1_cable:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:type1_cable~.+ & socket:type1_cable!=0
This tagrendering has labels
@@ -974,8 +982,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 1 with cable (J1772) offer?`
*Type 1 with cable (J1772) outputs at most {canonical(socket:type1_cable:output)}* is shown if `socket:type1_cable:output` is set
- - *Type 1 with cable (J1772) outputs at most 3.7 kW A* is shown if with socket:type1_cable:output=3.7 kW
- - *Type 1 with cable (J1772) outputs at most 7 kW A* is shown if with socket:type1_cable:output=7 kW
+ - *Type 1 with cable (J1772) outputs at most 3.7 kW* is shown if with socket:type1_cable:output=3.7 kW
+ - *Type 1 with cable (J1772) outputs at most 7 kW* is shown if with socket:type1_cable:output=7 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type1_cable~.+ & socket:type1_cable!=0
This tagrendering has labels
@@ -987,14 +995,16 @@ The question is `How much plugs of type Type 1 without cable (J177
*There are {socket:type1} plugs of type Type 1 without cable (J1772) available here* is shown if `socket:type1` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type1~.+ & socket:type1!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type1
The question is `What voltage do the plugs with Type 1 without cable (J1772) offer?`
*Type 1 without cable (J1772) outputs {canonical(socket:type1:voltage)}* is shown if `socket:type1:voltage` is set
- - *Type 1 without cable (J1772) outputs 200 volt* is shown if with socket:type1:voltage=200 V
- - *Type 1 without cable (J1772) outputs 240 volt* is shown if with socket:type1:voltage=240 V
+ - *Type 1 without cable (J1772) outputs 200 volt* is shown if with socket:type1:voltage=200
+ - *Type 1 without cable (J1772) outputs 240 volt* is shown if with socket:type1:voltage=240
This tagrendering is only visible in the popup if the following condition is met: socket:type1~.+ & socket:type1!=0
This tagrendering has labels
@@ -1005,7 +1015,7 @@ This tagrendering has labels
The question is `What current do the plugs with Type 1 without cable (J1772) offer?`
*Type 1 without cable (J1772) outputs at most {canonical(socket:type1:current)}* is shown if `socket:type1:current` is set
- - *Type 1 without cable (J1772) outputs at most 32 A* is shown if with socket:type1:current=32 A
+ - *Type 1 without cable (J1772) outputs at most 32 A* is shown if with socket:type1:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:type1~.+ & socket:type1!=0
This tagrendering has labels
@@ -1016,10 +1026,10 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 1 without cable (J1772) offer?`
*Type 1 without cable (J1772) outputs at most {canonical(socket:type1:output)}* is shown if `socket:type1:output` is set
- - *Type 1 without cable (J1772) outputs at most 3.7 kW A* is shown if with socket:type1:output=3.7 kW
- - *Type 1 without cable (J1772) outputs at most 6.6 kW A* is shown if with socket:type1:output=6.6 kW
- - *Type 1 without cable (J1772) outputs at most 7 kW A* is shown if with socket:type1:output=7 kW
- - *Type 1 without cable (J1772) outputs at most 7.2 kW A* is shown if with socket:type1:output=7.2 kW
+ - *Type 1 without cable (J1772) outputs at most 3.7 kW* is shown if with socket:type1:output=3.7 kW
+ - *Type 1 without cable (J1772) outputs at most 6.6 kW* is shown if with socket:type1:output=6.6 kW
+ - *Type 1 without cable (J1772) outputs at most 7 kW* is shown if with socket:type1:output=7 kW
+ - *Type 1 without cable (J1772) outputs at most 7.2 kW* is shown if with socket:type1:output=7.2 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type1~.+ & socket:type1!=0
This tagrendering has labels
@@ -1031,14 +1041,16 @@ The question is `How much plugs of type Type 1 CCS (aka Type 1 Combo) are
*There are {socket:type1_combo} plugs of type Type 1 CCS (aka Type 1 Combo) available here* is shown if `socket:type1_combo` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type1_combo~.+ & socket:type1_combo!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type1_combo
The question is `What voltage do the plugs with Type 1 CCS (aka Type 1 Combo) offer?`
*Type 1 CCS (aka Type 1 Combo) outputs {canonical(socket:type1_combo:voltage)}* is shown if `socket:type1_combo:voltage` is set
- - *Type 1 CCS (aka Type 1 Combo) outputs 400 volt* is shown if with socket:type1_combo:voltage=400 V
- - *Type 1 CCS (aka Type 1 Combo) outputs 1000 volt* is shown if with socket:type1_combo:voltage=1000 V
+ - *Type 1 CCS (aka Type 1 Combo) outputs 400 volt* is shown if with socket:type1_combo:voltage=400
+ - *Type 1 CCS (aka Type 1 Combo) outputs 1000 volt* is shown if with socket:type1_combo:voltage=1000
This tagrendering is only visible in the popup if the following condition is met: socket:type1_combo~.+ & socket:type1_combo!=0
This tagrendering has labels
@@ -1049,8 +1061,8 @@ This tagrendering has labels
The question is `What current do the plugs with Type 1 CCS (aka Type 1 Combo) offer?`
*Type 1 CCS (aka Type 1 Combo) outputs at most {canonical(socket:type1_combo:current)}* is shown if `socket:type1_combo:current` is set
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 50 A* is shown if with socket:type1_combo:current=50 A
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 125 A* is shown if with socket:type1_combo:current=125 A
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 50 A* is shown if with socket:type1_combo:current=50
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 125 A* is shown if with socket:type1_combo:current=125
This tagrendering is only visible in the popup if the following condition is met: socket:type1_combo~.+ & socket:type1_combo!=0
This tagrendering has labels
@@ -1061,10 +1073,10 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 1 CCS (aka Type 1 Combo) offer?`
*Type 1 CCS (aka Type 1 Combo) outputs at most {canonical(socket:type1_combo:output)}* is shown if `socket:type1_combo:output` is set
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 50 kW A* is shown if with socket:type1_combo:output=50 kW
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 62.5 kW A* is shown if with socket:type1_combo:output=62.5 kW
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 150 kW A* is shown if with socket:type1_combo:output=150 kW
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 350 kW A* is shown if with socket:type1_combo:output=350 kW
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 50 kW* is shown if with socket:type1_combo:output=50 kW
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 62.5 kW* is shown if with socket:type1_combo:output=62.5 kW
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 150 kW* is shown if with socket:type1_combo:output=150 kW
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 350 kW* is shown if with socket:type1_combo:output=350 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type1_combo~.+ & socket:type1_combo!=0
This tagrendering has labels
@@ -1076,13 +1088,15 @@ The question is `How much plugs of type Tesla Supercharger are available
*There are {socket:tesla_supercharger} plugs of type Tesla Supercharger available here* is shown if `socket:tesla_supercharger` is set
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:tesla_supercharger
The question is `What voltage do the plugs with Tesla Supercharger offer?`
*Tesla Supercharger outputs {canonical(socket:tesla_supercharger:voltage)}* is shown if `socket:tesla_supercharger:voltage` is set
- - *Tesla Supercharger outputs 480 volt* is shown if with socket:tesla_supercharger:voltage=480 V
+ - *Tesla Supercharger outputs 480 volt* is shown if with socket:tesla_supercharger:voltage=480
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0
This tagrendering has labels
@@ -1093,8 +1107,8 @@ This tagrendering has labels
The question is `What current do the plugs with Tesla Supercharger offer?`
*Tesla Supercharger outputs at most {canonical(socket:tesla_supercharger:current)}* is shown if `socket:tesla_supercharger:current` is set
- - *Tesla Supercharger outputs at most 125 A* is shown if with socket:tesla_supercharger:current=125 A
- - *Tesla Supercharger outputs at most 350 A* is shown if with socket:tesla_supercharger:current=350 A
+ - *Tesla Supercharger outputs at most 125 A* is shown if with socket:tesla_supercharger:current=125
+ - *Tesla Supercharger outputs at most 350 A* is shown if with socket:tesla_supercharger:current=350
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0
This tagrendering has labels
@@ -1105,9 +1119,9 @@ This tagrendering has labels
The question is `What power output does a single plug of type Tesla Supercharger offer?`
*Tesla Supercharger outputs at most {canonical(socket:tesla_supercharger:output)}* is shown if `socket:tesla_supercharger:output` is set
- - *Tesla Supercharger outputs at most 120 kW A* is shown if with socket:tesla_supercharger:output=120 kW
- - *Tesla Supercharger outputs at most 150 kW A* is shown if with socket:tesla_supercharger:output=150 kW
- - *Tesla Supercharger outputs at most 250 kW A* is shown if with socket:tesla_supercharger:output=250 kW
+ - *Tesla Supercharger outputs at most 120 kW* is shown if with socket:tesla_supercharger:output=120 kW
+ - *Tesla Supercharger outputs at most 150 kW* is shown if with socket:tesla_supercharger:output=150 kW
+ - *Tesla Supercharger outputs at most 250 kW* is shown if with socket:tesla_supercharger:output=250 kW
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0
This tagrendering has labels
@@ -1119,14 +1133,16 @@ The question is `How much plugs of type Type 2 (mennekes) are available h
*There are {socket:type2} plugs of type Type 2 (mennekes) available here* is shown if `socket:type2` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type2~.+ & socket:type2!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type2
The question is `What voltage do the plugs with Type 2 (mennekes) offer?`
*Type 2 (mennekes) outputs {canonical(socket:type2:voltage)}* is shown if `socket:type2:voltage` is set
- - *Type 2 (mennekes) outputs 230 volt* is shown if with socket:type2:voltage=230 V
- - *Type 2 (mennekes) outputs 400 volt* is shown if with socket:type2:voltage=400 V
+ - *Type 2 (mennekes) outputs 230 volt* is shown if with socket:type2:voltage=230
+ - *Type 2 (mennekes) outputs 400 volt* is shown if with socket:type2:voltage=400
This tagrendering is only visible in the popup if the following condition is met: socket:type2~.+ & socket:type2!=0
This tagrendering has labels
@@ -1137,8 +1153,8 @@ This tagrendering has labels
The question is `What current do the plugs with Type 2 (mennekes) offer?`
*Type 2 (mennekes) outputs at most {canonical(socket:type2:current)}* is shown if `socket:type2:current` is set
- - *Type 2 (mennekes) outputs at most 16 A* is shown if with socket:type2:current=16 A
- - *Type 2 (mennekes) outputs at most 32 A* is shown if with socket:type2:current=32 A
+ - *Type 2 (mennekes) outputs at most 16 A* is shown if with socket:type2:current=16
+ - *Type 2 (mennekes) outputs at most 32 A* is shown if with socket:type2:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:type2~.+ & socket:type2!=0
This tagrendering has labels
@@ -1149,8 +1165,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 2 (mennekes) offer?`
*Type 2 (mennekes) outputs at most {canonical(socket:type2:output)}* is shown if `socket:type2:output` is set
- - *Type 2 (mennekes) outputs at most 11 kW A* is shown if with socket:type2:output=11 kW
- - *Type 2 (mennekes) outputs at most 22 kW A* is shown if with socket:type2:output=22 kW
+ - *Type 2 (mennekes) outputs at most 11 kW* is shown if with socket:type2:output=11 kW
+ - *Type 2 (mennekes) outputs at most 22 kW* is shown if with socket:type2:output=22 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type2~.+ & socket:type2!=0
This tagrendering has labels
@@ -1162,14 +1178,16 @@ The question is `How much plugs of type Type 2 CCS (mennekes) are availab
*There are {socket:type2_combo} plugs of type Type 2 CCS (mennekes) available here* is shown if `socket:type2_combo` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type2_combo~.+ & socket:type2_combo!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type2_combo
The question is `What voltage do the plugs with Type 2 CCS (mennekes) offer?`
*Type 2 CCS (mennekes) outputs {canonical(socket:type2_combo:voltage)}* is shown if `socket:type2_combo:voltage` is set
- - *Type 2 CCS (mennekes) outputs 500 volt* is shown if with socket:type2_combo:voltage=500 V
- - *Type 2 CCS (mennekes) outputs 920 volt* is shown if with socket:type2_combo:voltage=920 V
+ - *Type 2 CCS (mennekes) outputs 500 volt* is shown if with socket:type2_combo:voltage=500
+ - *Type 2 CCS (mennekes) outputs 920 volt* is shown if with socket:type2_combo:voltage=920
This tagrendering is only visible in the popup if the following condition is met: socket:type2_combo~.+ & socket:type2_combo!=0
This tagrendering has labels
@@ -1180,8 +1198,8 @@ This tagrendering has labels
The question is `What current do the plugs with Type 2 CCS (mennekes) offer?`
*Type 2 CCS (mennekes) outputs at most {canonical(socket:type2_combo:current)}* is shown if `socket:type2_combo:current` is set
- - *Type 2 CCS (mennekes) outputs at most 125 A* is shown if with socket:type2_combo:current=125 A
- - *Type 2 CCS (mennekes) outputs at most 350 A* is shown if with socket:type2_combo:current=350 A
+ - *Type 2 CCS (mennekes) outputs at most 125 A* is shown if with socket:type2_combo:current=125
+ - *Type 2 CCS (mennekes) outputs at most 350 A* is shown if with socket:type2_combo:current=350
This tagrendering is only visible in the popup if the following condition is met: socket:type2_combo~.+ & socket:type2_combo!=0
This tagrendering has labels
@@ -1192,7 +1210,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 2 CCS (mennekes) offer?`
*Type 2 CCS (mennekes) outputs at most {canonical(socket:type2_combo:output)}* is shown if `socket:type2_combo:output` is set
- - *Type 2 CCS (mennekes) outputs at most 50 kW A* is shown if with socket:type2_combo:output=50 kW
+ - *Type 2 CCS (mennekes) outputs at most 50 kW* is shown if with socket:type2_combo:output=50 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type2_combo~.+ & socket:type2_combo!=0
This tagrendering has labels
@@ -1204,14 +1222,16 @@ The question is `How much plugs of type Type 2 with cable (mennekes) are
*There are {socket:type2_cable} plugs of type Type 2 with cable (mennekes) available here* is shown if `socket:type2_cable` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type2_cable~.+ & socket:type2_cable!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type2_cable
The question is `What voltage do the plugs with Type 2 with cable (mennekes) offer?`
*Type 2 with cable (mennekes) outputs {canonical(socket:type2_cable:voltage)}* is shown if `socket:type2_cable:voltage` is set
- - *Type 2 with cable (mennekes) outputs 230 volt* is shown if with socket:type2_cable:voltage=230 V
- - *Type 2 with cable (mennekes) outputs 400 volt* is shown if with socket:type2_cable:voltage=400 V
+ - *Type 2 with cable (mennekes) outputs 230 volt* is shown if with socket:type2_cable:voltage=230
+ - *Type 2 with cable (mennekes) outputs 400 volt* is shown if with socket:type2_cable:voltage=400
This tagrendering is only visible in the popup if the following condition is met: socket:type2_cable~.+ & socket:type2_cable!=0
This tagrendering has labels
@@ -1222,8 +1242,8 @@ This tagrendering has labels
The question is `What current do the plugs with Type 2 with cable (mennekes) offer?`
*Type 2 with cable (mennekes) outputs at most {canonical(socket:type2_cable:current)}* is shown if `socket:type2_cable:current` is set
- - *Type 2 with cable (mennekes) outputs at most 16 A* is shown if with socket:type2_cable:current=16 A
- - *Type 2 with cable (mennekes) outputs at most 32 A* is shown if with socket:type2_cable:current=32 A
+ - *Type 2 with cable (mennekes) outputs at most 16 A* is shown if with socket:type2_cable:current=16
+ - *Type 2 with cable (mennekes) outputs at most 32 A* is shown if with socket:type2_cable:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:type2_cable~.+ & socket:type2_cable!=0
This tagrendering has labels
@@ -1234,8 +1254,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 2 with cable (mennekes) offer?`
*Type 2 with cable (mennekes) outputs at most {canonical(socket:type2_cable:output)}* is shown if `socket:type2_cable:output` is set
- - *Type 2 with cable (mennekes) outputs at most 11 kW A* is shown if with socket:type2_cable:output=11 kW
- - *Type 2 with cable (mennekes) outputs at most 22 kW A* is shown if with socket:type2_cable:output=22 kW
+ - *Type 2 with cable (mennekes) outputs at most 11 kW* is shown if with socket:type2_cable:output=11 kW
+ - *Type 2 with cable (mennekes) outputs at most 22 kW* is shown if with socket:type2_cable:output=22 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type2_cable~.+ & socket:type2_cable!=0
This tagrendering has labels
@@ -1247,14 +1267,16 @@ The question is `How much plugs of type Tesla Supercharger CCS (a branded
*There are {socket:tesla_supercharger_ccs} plugs of type Tesla Supercharger CCS (a branded type2_css) available here* is shown if `socket:tesla_supercharger_ccs` is set
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:tesla_supercharger_ccs
The question is `What voltage do the plugs with Tesla Supercharger CCS (a branded type2_css) offer?`
*Tesla Supercharger CCS (a branded type2_css) outputs {canonical(socket:tesla_supercharger_ccs:voltage)}* is shown if `socket:tesla_supercharger_ccs:voltage` is set
- - *Tesla Supercharger CCS (a branded type2_css) outputs 500 volt* is shown if with socket:tesla_supercharger_ccs:voltage=500 V
- - *Tesla Supercharger CCS (a branded type2_css) outputs 920 volt* is shown if with socket:tesla_supercharger_ccs:voltage=920 V
+ - *Tesla Supercharger CCS (a branded type2_css) outputs 500 volt* is shown if with socket:tesla_supercharger_ccs:voltage=500
+ - *Tesla Supercharger CCS (a branded type2_css) outputs 920 volt* is shown if with socket:tesla_supercharger_ccs:voltage=920
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0
This tagrendering has labels
@@ -1265,8 +1287,8 @@ This tagrendering has labels
The question is `What current do the plugs with Tesla Supercharger CCS (a branded type2_css) offer?`
*Tesla Supercharger CCS (a branded type2_css) outputs at most {canonical(socket:tesla_supercharger_ccs:current)}* is shown if `socket:tesla_supercharger_ccs:current` is set
- - *Tesla Supercharger CCS (a branded type2_css) outputs at most 125 A* is shown if with socket:tesla_supercharger_ccs:current=125 A
- - *Tesla Supercharger CCS (a branded type2_css) outputs at most 350 A* is shown if with socket:tesla_supercharger_ccs:current=350 A
+ - *Tesla Supercharger CCS (a branded type2_css) outputs at most 125 A* is shown if with socket:tesla_supercharger_ccs:current=125
+ - *Tesla Supercharger CCS (a branded type2_css) outputs at most 350 A* is shown if with socket:tesla_supercharger_ccs:current=350
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0
This tagrendering has labels
@@ -1277,7 +1299,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type Tesla Supercharger CCS (a branded type2_css) offer?`
*Tesla Supercharger CCS (a branded type2_css) outputs at most {canonical(socket:tesla_supercharger_ccs:output)}* is shown if `socket:tesla_supercharger_ccs:output` is set
- - *Tesla Supercharger CCS (a branded type2_css) outputs at most 50 kW A* is shown if with socket:tesla_supercharger_ccs:output=50 kW
+ - *Tesla Supercharger CCS (a branded type2_css) outputs at most 50 kW* is shown if with socket:tesla_supercharger_ccs:output=50 kW
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0
This tagrendering has labels
@@ -1289,13 +1311,15 @@ The question is `How much plugs of type Tesla Supercharger (destination)
*There are {socket:tesla_destination} plugs of type Tesla Supercharger (destination) available here* is shown if `socket:tesla_destination` is set
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:tesla_destination_us
The question is `What voltage do the plugs with Tesla Supercharger (destination) offer?`
*Tesla Supercharger (destination) outputs {canonical(socket:tesla_destination:voltage)}* is shown if `socket:tesla_destination:voltage` is set
- - *Tesla Supercharger (destination) outputs 480 volt* is shown if with socket:tesla_destination:voltage=480 V
+ - *Tesla Supercharger (destination) outputs 480 volt* is shown if with socket:tesla_destination:voltage=480
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -1306,8 +1330,8 @@ This tagrendering has labels
The question is `What current do the plugs with Tesla Supercharger (destination) offer?`
*Tesla Supercharger (destination) outputs at most {canonical(socket:tesla_destination:current)}* is shown if `socket:tesla_destination:current` is set
- - *Tesla Supercharger (destination) outputs at most 125 A* is shown if with socket:tesla_destination:current=125 A
- - *Tesla Supercharger (destination) outputs at most 350 A* is shown if with socket:tesla_destination:current=350 A
+ - *Tesla Supercharger (destination) outputs at most 125 A* is shown if with socket:tesla_destination:current=125
+ - *Tesla Supercharger (destination) outputs at most 350 A* is shown if with socket:tesla_destination:current=350
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -1318,9 +1342,9 @@ This tagrendering has labels
The question is `What power output does a single plug of type Tesla Supercharger (destination) offer?`
*Tesla Supercharger (destination) outputs at most {canonical(socket:tesla_destination:output)}* is shown if `socket:tesla_destination:output` is set
- - *Tesla Supercharger (destination) outputs at most 120 kW A* is shown if with socket:tesla_destination:output=120 kW
- - *Tesla Supercharger (destination) outputs at most 150 kW A* is shown if with socket:tesla_destination:output=150 kW
- - *Tesla Supercharger (destination) outputs at most 250 kW A* is shown if with socket:tesla_destination:output=250 kW
+ - *Tesla Supercharger (destination) outputs at most 120 kW* is shown if with socket:tesla_destination:output=120 kW
+ - *Tesla Supercharger (destination) outputs at most 150 kW* is shown if with socket:tesla_destination:output=150 kW
+ - *Tesla Supercharger (destination) outputs at most 250 kW* is shown if with socket:tesla_destination:output=250 kW
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -1332,14 +1356,16 @@ The question is `How much plugs of type Tesla supercharger (destination)
*There are {socket:tesla_destination} plugs of type Tesla supercharger (destination) (A Type 2 with cable branded as tesla) available here* is shown if `socket:tesla_destination` is set
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:tesla_destination
The question is `What voltage do the plugs with Tesla supercharger (destination) (A Type 2 with cable branded as tesla) offer?`
*Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs {canonical(socket:tesla_destination:voltage)}* is shown if `socket:tesla_destination:voltage` is set
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 230 volt* is shown if with socket:tesla_destination:voltage=230 V
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 400 volt* is shown if with socket:tesla_destination:voltage=400 V
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 230 volt* is shown if with socket:tesla_destination:voltage=230
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 400 volt* is shown if with socket:tesla_destination:voltage=400
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -1350,8 +1376,8 @@ This tagrendering has labels
The question is `What current do the plugs with Tesla supercharger (destination) (A Type 2 with cable branded as tesla) offer?`
*Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most {canonical(socket:tesla_destination:current)}* is shown if `socket:tesla_destination:current` is set
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 16 A* is shown if with socket:tesla_destination:current=16 A
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 32 A* is shown if with socket:tesla_destination:current=32 A
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 16 A* is shown if with socket:tesla_destination:current=16
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 32 A* is shown if with socket:tesla_destination:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -1362,8 +1388,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type Tesla supercharger (destination) (A Type 2 with cable branded as tesla) offer?`
*Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most {canonical(socket:tesla_destination:output)}* is shown if `socket:tesla_destination:output` is set
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 11 kW A* is shown if with socket:tesla_destination:output=11 kW
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 22 kW A* is shown if with socket:tesla_destination:output=22 kW
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 11 kW* is shown if with socket:tesla_destination:output=11 kW
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 22 kW* is shown if with socket:tesla_destination:output=22 kW
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -1375,13 +1401,15 @@ The question is `How much plugs of type USB to charge phones and small el
*There are {socket:USB-A} plugs of type USB to charge phones and small electronics available here* is shown if `socket:USB-A` is set
This tagrendering is only visible in the popup if the following condition is met: socket:USB-A~.+ & socket:USB-A!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:USB-A
The question is `What voltage do the plugs with USB to charge phones and small electronics offer?`
*USB to charge phones and small electronics outputs {canonical(socket:USB-A:voltage)}* is shown if `socket:USB-A:voltage` is set
- - *USB to charge phones and small electronics outputs 5 volt* is shown if with socket:USB-A:voltage=5 V
+ - *USB to charge phones and small electronics outputs 5 volt* is shown if with socket:USB-A:voltage=5
This tagrendering is only visible in the popup if the following condition is met: socket:USB-A~.+ & socket:USB-A!=0
This tagrendering has labels
@@ -1392,8 +1420,8 @@ This tagrendering has labels
The question is `What current do the plugs with USB to charge phones and small electronics offer?`
*USB to charge phones and small electronics outputs at most {canonical(socket:USB-A:current)}* is shown if `socket:USB-A:current` is set
- - *USB to charge phones and small electronics outputs at most 1 A* is shown if with socket:USB-A:current=1 A
- - *USB to charge phones and small electronics outputs at most 2 A* is shown if with socket:USB-A:current=2 A
+ - *USB to charge phones and small electronics outputs at most 1 A* is shown if with socket:USB-A:current=1
+ - *USB to charge phones and small electronics outputs at most 2 A* is shown if with socket:USB-A:current=2
This tagrendering is only visible in the popup if the following condition is met: socket:USB-A~.+ & socket:USB-A!=0
This tagrendering has labels
@@ -1404,8 +1432,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type USB to charge phones and small electronics offer?`
*USB to charge phones and small electronics outputs at most {canonical(socket:USB-A:output)}* is shown if `socket:USB-A:output` is set
- - *USB to charge phones and small electronics outputs at most 5W A* is shown if with socket:USB-A:output=5W
- - *USB to charge phones and small electronics outputs at most 10W A* is shown if with socket:USB-A:output=10W
+ - *USB to charge phones and small electronics outputs at most 5W* is shown if with socket:USB-A:output=5W
+ - *USB to charge phones and small electronics outputs at most 10W* is shown if with socket:USB-A:output=10W
This tagrendering is only visible in the popup if the following condition is met: socket:USB-A~.+ & socket:USB-A!=0
This tagrendering has labels
@@ -1417,6 +1445,8 @@ The question is `How much plugs of type Bosch Active Connect with 3 pins
*There are {socket:bosch_3pin} plugs of type Bosch Active Connect with 3 pins and cable available here* is shown if `socket:bosch_3pin` is set
This tagrendering is only visible in the popup if the following condition is met: socket:bosch_3pin~.+ & socket:bosch_3pin!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:bosch_3pin
@@ -1451,6 +1481,8 @@ The question is `How much plugs of type Bosch Active Connect with 5 pins
*There are {socket:bosch_5pin} plugs of type Bosch Active Connect with 5 pins and cable available here* is shown if `socket:bosch_5pin` is set
This tagrendering is only visible in the popup if the following condition is met: socket:bosch_5pin~.+ & socket:bosch_5pin!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:bosch_5pin
@@ -1485,13 +1517,15 @@ The question is `How much plugs of type BS1363 (Type G) are available her
*There are {socket:bs1363} plugs of type BS1363 (Type G) available here* is shown if `socket:bs1363` is set
This tagrendering is only visible in the popup if the following condition is met: socket:bs1363~.+ & socket:bs1363!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:bs1363
The question is `What voltage do the plugs with BS1363 (Type G) offer?`
*BS1363 (Type G) outputs {canonical(socket:bs1363:voltage)}* is shown if `socket:bs1363:voltage` is set
- - *BS1363 (Type G) outputs 230 volt* is shown if with socket:bs1363:voltage=230 V
+ - *BS1363 (Type G) outputs 230 volt* is shown if with socket:bs1363:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:bs1363~.+ & socket:bs1363!=0
This tagrendering has labels
@@ -1502,7 +1536,7 @@ This tagrendering has labels
The question is `What current do the plugs with BS1363 (Type G) offer?`
*BS1363 (Type G) outputs at most {canonical(socket:bs1363:current)}* is shown if `socket:bs1363:current` is set
- - *BS1363 (Type G) outputs at most 13 A* is shown if with socket:bs1363:current=13 A
+ - *BS1363 (Type G) outputs at most 13 A* is shown if with socket:bs1363:current=13
This tagrendering is only visible in the popup if the following condition is met: socket:bs1363~.+ & socket:bs1363!=0
This tagrendering has labels
@@ -1513,7 +1547,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type BS1363 (Type G) offer?`
*BS1363 (Type G) outputs at most {canonical(socket:bs1363:output)}* is shown if `socket:bs1363:output` is set
- - *BS1363 (Type G) outputs at most 3kW A* is shown if with socket:bs1363:output=3kW
+ - *BS1363 (Type G) outputs at most 3kW* is shown if with socket:bs1363:output=3kW
This tagrendering is only visible in the popup if the following condition is met: socket:bs1363~.+ & socket:bs1363!=0
This tagrendering has labels
@@ -1525,13 +1559,15 @@ The question is `How much plugs of type NEMA 5-15 (Type B) are available
*There are {socket:nema5_15} plugs of type NEMA 5-15 (Type B) available here* is shown if `socket:nema5_15` is set
This tagrendering is only visible in the popup if the following condition is met: socket:nema5_15~.+ & socket:nema5_15!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:nema5_15
The question is `What voltage do the plugs with NEMA 5-15 (Type B) offer?`
*NEMA 5-15 (Type B) outputs {canonical(socket:nema5_15:voltage)}* is shown if `socket:nema5_15:voltage` is set
- - *NEMA 5-15 (Type B) outputs 120 volt* is shown if with socket:nema5_15:voltage=120 V
+ - *NEMA 5-15 (Type B) outputs 120 volt* is shown if with socket:nema5_15:voltage=120
This tagrendering is only visible in the popup if the following condition is met: socket:nema5_15~.+ & socket:nema5_15!=0
This tagrendering has labels
@@ -1542,7 +1578,7 @@ This tagrendering has labels
The question is `What current do the plugs with NEMA 5-15 (Type B) offer?`
*NEMA 5-15 (Type B) outputs at most {canonical(socket:nema5_15:current)}* is shown if `socket:nema5_15:current` is set
- - *NEMA 5-15 (Type B) outputs at most 15 A* is shown if with socket:nema5_15:current=15 A
+ - *NEMA 5-15 (Type B) outputs at most 15 A* is shown if with socket:nema5_15:current=15
This tagrendering is only visible in the popup if the following condition is met: socket:nema5_15~.+ & socket:nema5_15!=0
This tagrendering has labels
@@ -1553,7 +1589,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type NEMA 5-15 (Type B) offer?`
*NEMA 5-15 (Type B) outputs at most {canonical(socket:nema5_15:output)}* is shown if `socket:nema5_15:output` is set
- - *NEMA 5-15 (Type B) outputs at most 1.8 kW A* is shown if with socket:nema5_15:output=1.8 kW
+ - *NEMA 5-15 (Type B) outputs at most 1.8 kW* is shown if with socket:nema5_15:output=1.8 kW
This tagrendering is only visible in the popup if the following condition is met: socket:nema5_15~.+ & socket:nema5_15!=0
This tagrendering has labels
@@ -1565,13 +1601,15 @@ The question is `How much plugs of type SEV 1011 T23 (Type J) are availab
*There are {socket:sev1011_t23} plugs of type SEV 1011 T23 (Type J) available here* is shown if `socket:sev1011_t23` is set
This tagrendering is only visible in the popup if the following condition is met: socket:sev1011_t23~.+ & socket:sev1011_t23!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:sev1011_t23
The question is `What voltage do the plugs with SEV 1011 T23 (Type J) offer?`
*SEV 1011 T23 (Type J) outputs {canonical(socket:sev1011_t23:voltage)}* is shown if `socket:sev1011_t23:voltage` is set
- - *SEV 1011 T23 (Type J) outputs 230 volt* is shown if with socket:sev1011_t23:voltage=230 V
+ - *SEV 1011 T23 (Type J) outputs 230 volt* is shown if with socket:sev1011_t23:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:sev1011_t23~.+ & socket:sev1011_t23!=0
This tagrendering has labels
@@ -1582,7 +1620,7 @@ This tagrendering has labels
The question is `What current do the plugs with SEV 1011 T23 (Type J) offer?`
*SEV 1011 T23 (Type J) outputs at most {canonical(socket:sev1011_t23:current)}* is shown if `socket:sev1011_t23:current` is set
- - *SEV 1011 T23 (Type J) outputs at most 16 A* is shown if with socket:sev1011_t23:current=16 A
+ - *SEV 1011 T23 (Type J) outputs at most 16 A* is shown if with socket:sev1011_t23:current=16
This tagrendering is only visible in the popup if the following condition is met: socket:sev1011_t23~.+ & socket:sev1011_t23!=0
This tagrendering has labels
@@ -1593,7 +1631,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type SEV 1011 T23 (Type J) offer?`
*SEV 1011 T23 (Type J) outputs at most {canonical(socket:sev1011_t23:output)}* is shown if `socket:sev1011_t23:output` is set
- - *SEV 1011 T23 (Type J) outputs at most 3.7 kW A* is shown if with socket:sev1011_t23:output=3.7 kW
+ - *SEV 1011 T23 (Type J) outputs at most 3.7 kW* is shown if with socket:sev1011_t23:output=3.7 kW
This tagrendering is only visible in the popup if the following condition is met: socket:sev1011_t23~.+ & socket:sev1011_t23!=0
This tagrendering has labels
@@ -1605,13 +1643,15 @@ The question is `How much plugs of type AS3112 (Type I) are available her
*There are {socket:as3112} plugs of type AS3112 (Type I) available here* is shown if `socket:as3112` is set
This tagrendering is only visible in the popup if the following condition is met: socket:as3112~.+ & socket:as3112!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:as3112
The question is `What voltage do the plugs with AS3112 (Type I) offer?`
*AS3112 (Type I) outputs {canonical(socket:as3112:voltage)}* is shown if `socket:as3112:voltage` is set
- - *AS3112 (Type I) outputs 230 volt* is shown if with socket:as3112:voltage=230 V
+ - *AS3112 (Type I) outputs 230 volt* is shown if with socket:as3112:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:as3112~.+ & socket:as3112!=0
This tagrendering has labels
@@ -1622,7 +1662,7 @@ This tagrendering has labels
The question is `What current do the plugs with AS3112 (Type I) offer?`
*AS3112 (Type I) outputs at most {canonical(socket:as3112:current)}* is shown if `socket:as3112:current` is set
- - *AS3112 (Type I) outputs at most 10 A* is shown if with socket:as3112:current=10 A
+ - *AS3112 (Type I) outputs at most 10 A* is shown if with socket:as3112:current=10
This tagrendering is only visible in the popup if the following condition is met: socket:as3112~.+ & socket:as3112!=0
This tagrendering has labels
@@ -1633,7 +1673,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type AS3112 (Type I) offer?`
*AS3112 (Type I) outputs at most {canonical(socket:as3112:output)}* is shown if `socket:as3112:output` is set
- - *AS3112 (Type I) outputs at most 2.3 kW A* is shown if with socket:as3112:output=2.3 kW
+ - *AS3112 (Type I) outputs at most 2.3 kW* is shown if with socket:as3112:output=2.3 kW
This tagrendering is only visible in the popup if the following condition is met: socket:as3112~.+ & socket:as3112!=0
This tagrendering has labels
@@ -1645,13 +1685,15 @@ The question is `How much plugs of type NEMA 5-20 (Type B) are available
*There are {socket:nema_5_20} plugs of type NEMA 5-20 (Type B) available here* is shown if `socket:nema_5_20` is set
This tagrendering is only visible in the popup if the following condition is met: socket:nema_5_20~.+ & socket:nema_5_20!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:nema_5_20
The question is `What voltage do the plugs with NEMA 5-20 (Type B) offer?`
*NEMA 5-20 (Type B) outputs {canonical(socket:nema_5_20:voltage)}* is shown if `socket:nema_5_20:voltage` is set
- - *NEMA 5-20 (Type B) outputs 120 volt* is shown if with socket:nema_5_20:voltage=120 V
+ - *NEMA 5-20 (Type B) outputs 120 volt* is shown if with socket:nema_5_20:voltage=120
This tagrendering is only visible in the popup if the following condition is met: socket:nema_5_20~.+ & socket:nema_5_20!=0
This tagrendering has labels
@@ -1662,7 +1704,7 @@ This tagrendering has labels
The question is `What current do the plugs with NEMA 5-20 (Type B) offer?`
*NEMA 5-20 (Type B) outputs at most {canonical(socket:nema_5_20:current)}* is shown if `socket:nema_5_20:current` is set
- - *NEMA 5-20 (Type B) outputs at most 20 A* is shown if with socket:nema_5_20:current=20 A
+ - *NEMA 5-20 (Type B) outputs at most 20 A* is shown if with socket:nema_5_20:current=20
This tagrendering is only visible in the popup if the following condition is met: socket:nema_5_20~.+ & socket:nema_5_20!=0
This tagrendering has labels
@@ -1673,7 +1715,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type NEMA 5-20 (Type B) offer?`
*NEMA 5-20 (Type B) outputs at most {canonical(socket:nema_5_20:output)}* is shown if `socket:nema_5_20:output` is set
- - *NEMA 5-20 (Type B) outputs at most 2.4 kW A* is shown if with socket:nema_5_20:output=2.4 kW
+ - *NEMA 5-20 (Type B) outputs at most 2.4 kW* is shown if with socket:nema_5_20:output=2.4 kW
This tagrendering is only visible in the popup if the following condition is met: socket:nema_5_20~.+ & socket:nema_5_20!=0
This tagrendering has labels
diff --git a/Docs/Themes/glutenfree.md b/Docs/Themes/glutenfree.md
index 2b49eba47..0a5453477 100644
--- a/Docs/Themes/glutenfree.md
+++ b/Docs/Themes/glutenfree.md
@@ -1169,6 +1169,7 @@ The question is `What kind of shop is this?`
- *Wig Shop* is shown if with shop=wigs
- *Window Blind Store* is shown if with shop=window_blind
- *Wine Shop* is shown if with shop=wine
+ - *This shop is no longer used. It is vacant* is shown if with disused:shop=
This tagrendering has labels
`description`
@@ -1738,6 +1739,7 @@ This tagrendering has labels
| shop_types.162 | Wig Shop | shop=wigs |
| shop_types.163 | Window Blind Store | shop=window_blind |
| shop_types.164 | Wine Shop | shop=wine |
+| shop_types.165 | This shop is no longer used. It is vacant | disused:shop= | (shop=disused | shop=vacant | disused:shop~^(.+)$ | abandoned:shop~^(.+)$) |
| id | question | osmTags |
-----|-----|----- |
diff --git a/Docs/Themes/healthcare.md b/Docs/Themes/healthcare.md
index ff74a0d13..7735ea65b 100644
--- a/Docs/Themes/healthcare.md
+++ b/Docs/Themes/healthcare.md
@@ -348,6 +348,7 @@ The question is `What kind of shop is this?`
- *Wig Shop* is shown if with shop=wigs
- *Window Blind Store* is shown if with shop=window_blind
- *Wine Shop* is shown if with shop=wine
+ - *This shop is no longer used. It is vacant* is shown if with disused:shop=
This tagrendering has labels
`description`
@@ -934,6 +935,7 @@ This tagrendering has labels
| shop_types.162 | Wig Shop | shop=wigs |
| shop_types.163 | Window Blind Store | shop=window_blind |
| shop_types.164 | Wine Shop | shop=wine |
+| shop_types.165 | This shop is no longer used. It is vacant | disused:shop= | (shop=disused | shop=vacant | disused:shop~^(.+)$ | abandoned:shop~^(.+)$) |
| id | question | osmTags |
-----|-----|----- |
diff --git a/Docs/Themes/lactosefree.md b/Docs/Themes/lactosefree.md
index 2ad0b20be..4b9041bca 100644
--- a/Docs/Themes/lactosefree.md
+++ b/Docs/Themes/lactosefree.md
@@ -1166,6 +1166,7 @@ The question is `What kind of shop is this?`
- *Wig Shop* is shown if with shop=wigs
- *Window Blind Store* is shown if with shop=window_blind
- *Wine Shop* is shown if with shop=wine
+ - *This shop is no longer used. It is vacant* is shown if with disused:shop=
This tagrendering has labels
`description`
@@ -1735,6 +1736,7 @@ This tagrendering has labels
| shop_types.162 | Wig Shop | shop=wigs |
| shop_types.163 | Window Blind Store | shop=window_blind |
| shop_types.164 | Wine Shop | shop=wine |
+| shop_types.165 | This shop is no longer used. It is vacant | disused:shop= | (shop=disused | shop=vacant | disused:shop~^(.+)$ | abandoned:shop~^(.+)$) |
| id | question | osmTags |
-----|-----|----- |
diff --git a/Docs/Themes/mapcomplete-changes.md b/Docs/Themes/mapcomplete-changes.md
index d357d7282..b87957aff 100644
--- a/Docs/Themes/mapcomplete-changes.md
+++ b/Docs/Themes/mapcomplete-changes.md
@@ -19,6 +19,7 @@ Available languages:
- es
- fr
- nl
+ - ko
# Table of contents
diff --git a/Docs/Themes/openlovemap.md b/Docs/Themes/openlovemap.md
index 5107a41d2..32290504b 100644
--- a/Docs/Themes/openlovemap.md
+++ b/Docs/Themes/openlovemap.md
@@ -384,6 +384,7 @@ The question is `What kind of shop is this?`
- *Wig Shop* is shown if with shop=wigs
- *Window Blind Store* is shown if with shop=window_blind
- *Wine Shop* is shown if with shop=wine
+ - *This shop is no longer used. It is vacant* is shown if with disused:shop=
This tagrendering has labels
`description`
@@ -996,6 +997,7 @@ This tagrendering has labels
| shop_types.162 | Wig Shop | shop=wigs |
| shop_types.163 | Window Blind Store | shop=window_blind |
| shop_types.164 | Wine Shop | shop=wine |
+| shop_types.165 | This shop is no longer used. It is vacant | disused:shop= | (shop=disused | shop=vacant | disused:shop~^(.+)$ | abandoned:shop~^(.+)$) |
| id | question | osmTags |
-----|-----|----- |
diff --git a/Docs/Themes/personal.md b/Docs/Themes/personal.md
index 53d670292..020a1c9fc 100644
--- a/Docs/Themes/personal.md
+++ b/Docs/Themes/personal.md
@@ -35,6 +35,7 @@ This theme contains the following layers:
- [birdhide](../Layers/birdhide.md)
- [cafe_pub](../Layers/cafe_pub.md)
- [caravansites](../Layers/caravansites.md)
+ - [charge_point](../Layers/charge_point.md)
- [charging_station](../Layers/charging_station.md)
- [climbing_area](../Layers/climbing_area.md)
- [climbing_club](../Layers/climbing_club.md)
@@ -109,6 +110,7 @@ This theme contains the following layers:
- [reception_desk](../Layers/reception_desk.md)
- [recycling](../Layers/recycling.md)
- [school](../Layers/school.md)
+ - [scouting_group](../Layers/scouting_group.md)
- [shelter](../Layers/shelter.md)
- [shops](../Layers/shops.md)
- [shower](../Layers/shower.md)
diff --git a/Docs/Themes/pets.md b/Docs/Themes/pets.md
index 94337c4b1..af7d96121 100644
--- a/Docs/Themes/pets.md
+++ b/Docs/Themes/pets.md
@@ -939,6 +939,7 @@ The question is `What kind of shop is this?`
- *Wig Shop* is shown if with shop=wigs
- *Window Blind Store* is shown if with shop=window_blind
- *Wine Shop* is shown if with shop=wine
+ - *This shop is no longer used. It is vacant* is shown if with disused:shop=
This tagrendering has labels
`description`
@@ -1521,6 +1522,7 @@ This tagrendering has labels
| shop_types.162 | Wig Shop | shop=wigs |
| shop_types.163 | Window Blind Store | shop=window_blind |
| shop_types.164 | Wine Shop | shop=wine |
+| shop_types.165 | This shop is no longer used. It is vacant | disused:shop= | (shop=disused | shop=vacant | disused:shop~^(.+)$ | abandoned:shop~^(.+)$) |
| id | question | osmTags |
-----|-----|----- |
diff --git a/Docs/Themes/scouting.md b/Docs/Themes/scouting.md
new file mode 100644
index 000000000..4f286f03d
--- /dev/null
+++ b/Docs/Themes/scouting.md
@@ -0,0 +1,21 @@
+[//]: # (WARNING: this file is automatically generated. Please find the sources at the bottom and edit those sources)
+
+## Scouting groups ( [scouting](https://mapcomplete.org/scouting) )
+_This document details some technical information about this MapComplete theme, mostly about the attributes used in the theme. Various links point toward more information about the attributes, e.g. to the OpenStreetMap-wiki, to TagInfo or tools creating statistics_
+The theme introduction reads:
+
+> A scouting group is a social youth movement with a heavy emphasis on the outdoors. Activities range from camping, hiking, aquatics, backpacking, exploring nature, ...
+
+This theme contains the following layers:
+
+ - [scouting_group](../Layers/scouting_group.md)
+
+Available languages:
+
+ - en
+
+# Layers defined in this theme configuration file
+These layers can not be reused in different themes.
+
+
+This document is autogenerated from [assets/themes/scouting/scouting.json](https://github.com/pietervdvn/MapComplete/blob/develop/assets/themes/scouting/scouting.json)
diff --git a/Docs/Themes/sports.md b/Docs/Themes/sports.md
index 7163f3268..f5d5029a7 100644
--- a/Docs/Themes/sports.md
+++ b/Docs/Themes/sports.md
@@ -339,6 +339,7 @@ The question is `What kind of shop is this?`
- *Wig Shop* is shown if with shop=wigs
- *Window Blind Store* is shown if with shop=window_blind
- *Wine Shop* is shown if with shop=wine
+ - *This shop is no longer used. It is vacant* is shown if with disused:shop=
This tagrendering has labels
`description`
@@ -921,6 +922,7 @@ This tagrendering has labels
| shop_types.162 | Wig Shop | shop=wigs |
| shop_types.163 | Window Blind Store | shop=window_blind |
| shop_types.164 | Wine Shop | shop=wine |
+| shop_types.165 | This shop is no longer used. It is vacant | disused:shop= | (shop=disused | shop=vacant | disused:shop~^(.+)$ | abandoned:shop~^(.+)$) |
| id | question | osmTags |
-----|-----|----- |
diff --git a/Docs/Themes/toerisme_vlaanderen.md b/Docs/Themes/toerisme_vlaanderen.md
index 1dacdfe13..f2041860a 100644
--- a/Docs/Themes/toerisme_vlaanderen.md
+++ b/Docs/Themes/toerisme_vlaanderen.md
@@ -208,60 +208,60 @@ Elements must match **all** of the following expressions:
| [access](https://wiki.openstreetmap.org/wiki/Key:access) | [string](../SpecialInputElements.md#string) | [yes](https://wiki.openstreetmap.org/wiki/Tag:access%3Dyes) [customers](https://wiki.openstreetmap.org/wiki/Tag:access%3Dcustomers) [key](https://wiki.openstreetmap.org/wiki/Tag:access%3Dkey) [private](https://wiki.openstreetmap.org/wiki/Tag:access%3Dprivate) [permissive](https://wiki.openstreetmap.org/wiki/Tag:access%3Dpermissive) |
| [capacity](https://wiki.openstreetmap.org/wiki/Key:capacity) | [pnat](../SpecialInputElements.md#pnat) | |
| [socket:schuko](https://wiki.openstreetmap.org/wiki/Key:socket:schuko) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:schuko:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:voltage%3D230 V) |
-| [socket:schuko:current](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:current%3D16 A) |
+| [socket:schuko:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:voltage%3D230) |
+| [socket:schuko:current](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:current%3D16) |
| [socket:schuko:output](https://wiki.openstreetmap.org/wiki/Key:socket:schuko:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3.6 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:schuko:output%3D3.6 kW) |
| [socket:typee](https://wiki.openstreetmap.org/wiki/Key:socket:typee) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:typee:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:typee:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:voltage%3D230 V) |
-| [socket:typee:current](https://wiki.openstreetmap.org/wiki/Key:socket:typee:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:current%3D16 A) |
+| [socket:typee:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:typee:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:voltage%3D230) |
+| [socket:typee:current](https://wiki.openstreetmap.org/wiki/Key:socket:typee:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:current%3D16) |
| [socket:typee:output](https://wiki.openstreetmap.org/wiki/Key:socket:typee:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:output%3D3 kW) [22 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:typee:output%3D22 kW) |
| [socket:chademo](https://wiki.openstreetmap.org/wiki/Key:socket:chademo) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:chademo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500 V](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:voltage%3D500 V) |
-| [socket:chademo:current](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [120 A](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:current%3D120 A) |
+| [socket:chademo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:voltage%3D500) |
+| [socket:chademo:current](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [120](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:current%3D120) |
| [socket:chademo:output](https://wiki.openstreetmap.org/wiki/Key:socket:chademo:output) | [pfloat](../SpecialInputElements.md#pfloat) | [50 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:chademo:output%3D50 kW) |
| [socket:type1_cable](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type1_cable:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [200 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:voltage%3D200 V) [240 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:voltage%3D240 V) |
-| [socket:type1_cable:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:current) | [pfloat](../SpecialInputElements.md#pfloat) | [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:current%3D32 A) |
+| [socket:type1_cable:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [200](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:voltage%3D200) [240](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:voltage%3D240) |
+| [socket:type1_cable:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:current) | [pfloat](../SpecialInputElements.md#pfloat) | [32](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:current%3D32) |
| [socket:type1_cable:output](https://wiki.openstreetmap.org/wiki/Key:socket:type1_cable:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3.7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:output%3D3.7 kW) [7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_cable:output%3D7 kW) |
| [socket:type1](https://wiki.openstreetmap.org/wiki/Key:socket:type1) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type1:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [200 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:voltage%3D200 V) [240 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:voltage%3D240 V) |
-| [socket:type1:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1:current) | [pfloat](../SpecialInputElements.md#pfloat) | [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:current%3D32 A) |
+| [socket:type1:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [200](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:voltage%3D200) [240](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:voltage%3D240) |
+| [socket:type1:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1:current) | [pfloat](../SpecialInputElements.md#pfloat) | [32](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:current%3D32) |
| [socket:type1:output](https://wiki.openstreetmap.org/wiki/Key:socket:type1:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3.7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:output%3D3.7 kW) [6.6 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:output%3D6.6 kW) [7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:output%3D7 kW) [7.2 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1:output%3D7.2 kW) |
| [socket:type1_combo](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type1_combo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [400 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:voltage%3D400 V) [1000 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:voltage%3D1000 V) |
-| [socket:type1_combo:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [50 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:current%3D50 A) [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:current%3D125 A) |
+| [socket:type1_combo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [400](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:voltage%3D400) [1000](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:voltage%3D1000) |
+| [socket:type1_combo:current](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [50](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:current%3D50) [125](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:current%3D125) |
| [socket:type1_combo:output](https://wiki.openstreetmap.org/wiki/Key:socket:type1_combo:output) | [pfloat](../SpecialInputElements.md#pfloat) | [50 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:output%3D50 kW) [62.5 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:output%3D62.5 kW) [150 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:output%3D150 kW) [350 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type1_combo:output%3D350 kW) |
| [socket:tesla_supercharger](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:tesla_supercharger:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [480 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:voltage%3D480 V) |
-| [socket:tesla_supercharger:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:current%3D125 A) [350 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:current%3D350 A) |
+| [socket:tesla_supercharger:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [480](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:voltage%3D480) |
+| [socket:tesla_supercharger:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:current%3D125) [350](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:current%3D350) |
| [socket:tesla_supercharger:output](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger:output) | [pfloat](../SpecialInputElements.md#pfloat) | [120 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:output%3D120 kW) [150 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:output%3D150 kW) [250 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger:output%3D250 kW) |
| [socket:type2](https://wiki.openstreetmap.org/wiki/Key:socket:type2) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type2:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:voltage%3D230 V) [400 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:voltage%3D400 V) |
-| [socket:type2:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:current%3D16 A) [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:current%3D32 A) |
+| [socket:type2:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:voltage%3D230) [400](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:voltage%3D400) |
+| [socket:type2:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:current%3D16) [32](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:current%3D32) |
| [socket:type2:output](https://wiki.openstreetmap.org/wiki/Key:socket:type2:output) | [pfloat](../SpecialInputElements.md#pfloat) | [11 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:output%3D11 kW) [22 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2:output%3D22 kW) |
| [socket:type2_combo](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type2_combo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:voltage%3D500 V) [920 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:voltage%3D920 V) |
-| [socket:type2_combo:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:current%3D125 A) [350 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:current%3D350 A) |
+| [socket:type2_combo:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:voltage%3D500) [920](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:voltage%3D920) |
+| [socket:type2_combo:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:current%3D125) [350](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:current%3D350) |
| [socket:type2_combo:output](https://wiki.openstreetmap.org/wiki/Key:socket:type2_combo:output) | [pfloat](../SpecialInputElements.md#pfloat) | [50 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_combo:output%3D50 kW) |
| [socket:type2_cable](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:type2_cable:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:voltage%3D230 V) [400 V](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:voltage%3D400 V) |
-| [socket:type2_cable:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:current%3D16 A) [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:current%3D32 A) |
+| [socket:type2_cable:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:voltage%3D230) [400](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:voltage%3D400) |
+| [socket:type2_cable:current](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:current%3D16) [32](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:current%3D32) |
| [socket:type2_cable:output](https://wiki.openstreetmap.org/wiki/Key:socket:type2_cable:output) | [pfloat](../SpecialInputElements.md#pfloat) | [11 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:output%3D11 kW) [22 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:type2_cable:output%3D22 kW) |
| [socket:tesla_supercharger_ccs](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:tesla_supercharger_ccs:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:voltage%3D500 V) [920 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:voltage%3D920 V) |
-| [socket:tesla_supercharger_ccs:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:current%3D125 A) [350 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:current%3D350 A) |
+| [socket:tesla_supercharger_ccs:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [500](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:voltage%3D500) [920](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:voltage%3D920) |
+| [socket:tesla_supercharger_ccs:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:current%3D125) [350](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:current%3D350) |
| [socket:tesla_supercharger_ccs:output](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_supercharger_ccs:output) | [pfloat](../SpecialInputElements.md#pfloat) | [50 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_supercharger_ccs:output%3D50 kW) |
| [socket:tesla_destination](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:tesla_destination:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [480 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D480 V) |
-| [socket:tesla_destination:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D125 A) [350 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D350 A) |
+| [socket:tesla_destination:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [480](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D480) |
+| [socket:tesla_destination:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:current) | [pfloat](../SpecialInputElements.md#pfloat) | [125](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D125) [350](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D350) |
| [socket:tesla_destination:output](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:output) | [pfloat](../SpecialInputElements.md#pfloat) | [120 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D120 kW) [150 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D150 kW) [250 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D250 kW) |
| [socket:tesla_destination](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:tesla_destination:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D230 V) [400 V](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D400 V) |
-| [socket:tesla_destination:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D16 A) [32 A](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D32 A) |
+| [socket:tesla_destination:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D230) [400](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:voltage%3D400) |
+| [socket:tesla_destination:current](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D16) [32](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:current%3D32) |
| [socket:tesla_destination:output](https://wiki.openstreetmap.org/wiki/Key:socket:tesla_destination:output) | [pfloat](../SpecialInputElements.md#pfloat) | [11 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D11 kW) [22 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:tesla_destination:output%3D22 kW) |
| [socket:USB-A](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:USB-A:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [5 V](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:voltage%3D5 V) |
-| [socket:USB-A:current](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:current) | [pfloat](../SpecialInputElements.md#pfloat) | [1 A](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:current%3D1 A) [2 A](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:current%3D2 A) |
+| [socket:USB-A:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [5](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:voltage%3D5) |
+| [socket:USB-A:current](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:current) | [pfloat](../SpecialInputElements.md#pfloat) | [1](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:current%3D1) [2](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:current%3D2) |
| [socket:USB-A:output](https://wiki.openstreetmap.org/wiki/Key:socket:USB-A:output) | [pfloat](../SpecialInputElements.md#pfloat) | [5W](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:output%3D5W) [10W](https://wiki.openstreetmap.org/wiki/Tag:socket:USB-A:output%3D10W) |
| [socket:bosch_3pin](https://wiki.openstreetmap.org/wiki/Key:socket:bosch_3pin) | [pnat](../SpecialInputElements.md#pnat) | |
| [socket:bosch_3pin:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:bosch_3pin:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | |
@@ -272,24 +272,24 @@ Elements must match **all** of the following expressions:
| [socket:bosch_5pin:current](https://wiki.openstreetmap.org/wiki/Key:socket:bosch_5pin:current) | [pfloat](../SpecialInputElements.md#pfloat) | |
| [socket:bosch_5pin:output](https://wiki.openstreetmap.org/wiki/Key:socket:bosch_5pin:output) | [pfloat](../SpecialInputElements.md#pfloat) | |
| [socket:bs1363](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:bs1363:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:voltage%3D230 V) |
-| [socket:bs1363:current](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:current) | [pfloat](../SpecialInputElements.md#pfloat) | [13 A](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:current%3D13 A) |
+| [socket:bs1363:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:voltage%3D230) |
+| [socket:bs1363:current](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:current) | [pfloat](../SpecialInputElements.md#pfloat) | [13](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:current%3D13) |
| [socket:bs1363:output](https://wiki.openstreetmap.org/wiki/Key:socket:bs1363:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3kW](https://wiki.openstreetmap.org/wiki/Tag:socket:bs1363:output%3D3kW) |
| [socket:nema5_15](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:nema5_15:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [120 V](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:voltage%3D120 V) |
-| [socket:nema5_15:current](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:current) | [pfloat](../SpecialInputElements.md#pfloat) | [15 A](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:current%3D15 A) |
+| [socket:nema5_15:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [120](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:voltage%3D120) |
+| [socket:nema5_15:current](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:current) | [pfloat](../SpecialInputElements.md#pfloat) | [15](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:current%3D15) |
| [socket:nema5_15:output](https://wiki.openstreetmap.org/wiki/Key:socket:nema5_15:output) | [pfloat](../SpecialInputElements.md#pfloat) | [1.8 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:nema5_15:output%3D1.8 kW) |
| [socket:sev1011_t23](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:sev1011_t23:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:voltage%3D230 V) |
-| [socket:sev1011_t23:current](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16 A](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:current%3D16 A) |
+| [socket:sev1011_t23:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:voltage%3D230) |
+| [socket:sev1011_t23:current](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:current) | [pfloat](../SpecialInputElements.md#pfloat) | [16](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:current%3D16) |
| [socket:sev1011_t23:output](https://wiki.openstreetmap.org/wiki/Key:socket:sev1011_t23:output) | [pfloat](../SpecialInputElements.md#pfloat) | [3.7 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:sev1011_t23:output%3D3.7 kW) |
| [socket:as3112](https://wiki.openstreetmap.org/wiki/Key:socket:as3112) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:as3112:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230 V](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:voltage%3D230 V) |
-| [socket:as3112:current](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:current) | [pfloat](../SpecialInputElements.md#pfloat) | [10 A](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:current%3D10 A) |
+| [socket:as3112:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [230](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:voltage%3D230) |
+| [socket:as3112:current](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:current) | [pfloat](../SpecialInputElements.md#pfloat) | [10](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:current%3D10) |
| [socket:as3112:output](https://wiki.openstreetmap.org/wiki/Key:socket:as3112:output) | [pfloat](../SpecialInputElements.md#pfloat) | [2.3 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:as3112:output%3D2.3 kW) |
| [socket:nema_5_20](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20) | [pnat](../SpecialInputElements.md#pnat) | |
-| [socket:nema_5_20:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [120 V](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:voltage%3D120 V) |
-| [socket:nema_5_20:current](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:current) | [pfloat](../SpecialInputElements.md#pfloat) | [20 A](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:current%3D20 A) |
+| [socket:nema_5_20:voltage](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:voltage) | [pfloat](../SpecialInputElements.md#pfloat) | [120](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:voltage%3D120) |
+| [socket:nema_5_20:current](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:current) | [pfloat](../SpecialInputElements.md#pfloat) | [20](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:current%3D20) |
| [socket:nema_5_20:output](https://wiki.openstreetmap.org/wiki/Key:socket:nema_5_20:output) | [pfloat](../SpecialInputElements.md#pfloat) | [2.4 kW](https://wiki.openstreetmap.org/wiki/Tag:socket:nema_5_20:output%3D2.4 kW) |
| [opening_hours](https://wiki.openstreetmap.org/wiki/Key:opening_hours) | [opening_hours](../SpecialInputElements.md#opening_hours) | [24/7](https://wiki.openstreetmap.org/wiki/Tag:opening_hours%3D24/7) |
| [fee](https://wiki.openstreetmap.org/wiki/Key:fee) | Multiple choice | [no](https://wiki.openstreetmap.org/wiki/Tag:fee%3Dno) [no](https://wiki.openstreetmap.org/wiki/Tag:fee%3Dno) [yes](https://wiki.openstreetmap.org/wiki/Tag:fee%3Dyes) [yes](https://wiki.openstreetmap.org/wiki/Tag:fee%3Dyes) |
@@ -391,13 +391,15 @@ The question is `How much plugs of type Schuko wall plug without ground p
*There are {socket:schuko} plugs of type Schuko wall plug without ground pin (CEE7/4 type F) available here* is shown if `socket:schuko` is set
This tagrendering is only visible in the popup if the following condition is met: socket:schuko~.+ & socket:schuko!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:schuko
The question is `What voltage do the plugs with Schuko wall plug without ground pin (CEE7/4 type F) offer?`
*Schuko wall plug without ground pin (CEE7/4 type F) outputs {canonical(socket:schuko:voltage)}* is shown if `socket:schuko:voltage` is set
- - *Schuko wall plug without ground pin (CEE7/4 type F) outputs 230 volt* is shown if with socket:schuko:voltage=230 V
+ - *Schuko wall plug without ground pin (CEE7/4 type F) outputs 230 volt* is shown if with socket:schuko:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:schuko~.+ & socket:schuko!=0
This tagrendering has labels
@@ -408,7 +410,7 @@ This tagrendering has labels
The question is `What current do the plugs with Schuko wall plug without ground pin (CEE7/4 type F) offer?`
*Schuko wall plug without ground pin (CEE7/4 type F) outputs at most {canonical(socket:schuko:current)}* is shown if `socket:schuko:current` is set
- - *Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 16 A* is shown if with socket:schuko:current=16 A
+ - *Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 16 A* is shown if with socket:schuko:current=16
This tagrendering is only visible in the popup if the following condition is met: socket:schuko~.+ & socket:schuko!=0
This tagrendering has labels
@@ -419,7 +421,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type Schuko wall plug without ground pin (CEE7/4 type F) offer?`
*Schuko wall plug without ground pin (CEE7/4 type F) outputs at most {canonical(socket:schuko:output)}* is shown if `socket:schuko:output` is set
- - *Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 3.6 kW A* is shown if with socket:schuko:output=3.6 kW
+ - *Schuko wall plug without ground pin (CEE7/4 type F) outputs at most 3.6 kW* is shown if with socket:schuko:output=3.6 kW
This tagrendering is only visible in the popup if the following condition is met: socket:schuko~.+ & socket:schuko!=0
This tagrendering has labels
@@ -431,13 +433,15 @@ The question is `How much plugs of type European wall plug with ground pi
*There are {socket:typee} plugs of type European wall plug with ground pin (CEE7/4 type E) available here* is shown if `socket:typee` is set
This tagrendering is only visible in the popup if the following condition is met: socket:typee~.+ & socket:typee!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:typee
The question is `What voltage do the plugs with European wall plug with ground pin (CEE7/4 type E) offer?`
*European wall plug with ground pin (CEE7/4 type E) outputs {canonical(socket:typee:voltage)}* is shown if `socket:typee:voltage` is set
- - *European wall plug with ground pin (CEE7/4 type E) outputs 230 volt* is shown if with socket:typee:voltage=230 V
+ - *European wall plug with ground pin (CEE7/4 type E) outputs 230 volt* is shown if with socket:typee:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:typee~.+ & socket:typee!=0
This tagrendering has labels
@@ -448,7 +452,7 @@ This tagrendering has labels
The question is `What current do the plugs with European wall plug with ground pin (CEE7/4 type E) offer?`
*European wall plug with ground pin (CEE7/4 type E) outputs at most {canonical(socket:typee:current)}* is shown if `socket:typee:current` is set
- - *European wall plug with ground pin (CEE7/4 type E) outputs at most 16 A* is shown if with socket:typee:current=16 A
+ - *European wall plug with ground pin (CEE7/4 type E) outputs at most 16 A* is shown if with socket:typee:current=16
This tagrendering is only visible in the popup if the following condition is met: socket:typee~.+ & socket:typee!=0
This tagrendering has labels
@@ -459,8 +463,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type European wall plug with ground pin (CEE7/4 type E) offer?`
*European wall plug with ground pin (CEE7/4 type E) outputs at most {canonical(socket:typee:output)}* is shown if `socket:typee:output` is set
- - *European wall plug with ground pin (CEE7/4 type E) outputs at most 3 kW A* is shown if with socket:typee:output=3 kW
- - *European wall plug with ground pin (CEE7/4 type E) outputs at most 22 kW A* is shown if with socket:typee:output=22 kW
+ - *European wall plug with ground pin (CEE7/4 type E) outputs at most 3 kW* is shown if with socket:typee:output=3 kW
+ - *European wall plug with ground pin (CEE7/4 type E) outputs at most 22 kW* is shown if with socket:typee:output=22 kW
This tagrendering is only visible in the popup if the following condition is met: socket:typee~.+ & socket:typee!=0
This tagrendering has labels
@@ -472,13 +476,15 @@ The question is `How much plugs of type Chademo are available here?`
*There are {socket:chademo} plugs of type Chademo available here* is shown if `socket:chademo` is set
This tagrendering is only visible in the popup if the following condition is met: socket:chademo~.+ & socket:chademo!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:chademo
The question is `What voltage do the plugs with Chademo offer?`
*Chademo outputs {canonical(socket:chademo:voltage)}* is shown if `socket:chademo:voltage` is set
- - *Chademo outputs 500 volt* is shown if with socket:chademo:voltage=500 V
+ - *Chademo outputs 500 volt* is shown if with socket:chademo:voltage=500
This tagrendering is only visible in the popup if the following condition is met: socket:chademo~.+ & socket:chademo!=0
This tagrendering has labels
@@ -489,7 +495,7 @@ This tagrendering has labels
The question is `What current do the plugs with Chademo offer?`
*Chademo outputs at most {canonical(socket:chademo:current)}* is shown if `socket:chademo:current` is set
- - *Chademo outputs at most 120 A* is shown if with socket:chademo:current=120 A
+ - *Chademo outputs at most 120 A* is shown if with socket:chademo:current=120
This tagrendering is only visible in the popup if the following condition is met: socket:chademo~.+ & socket:chademo!=0
This tagrendering has labels
@@ -500,7 +506,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type Chademo offer?`
*Chademo outputs at most {canonical(socket:chademo:output)}* is shown if `socket:chademo:output` is set
- - *Chademo outputs at most 50 kW A* is shown if with socket:chademo:output=50 kW
+ - *Chademo outputs at most 50 kW* is shown if with socket:chademo:output=50 kW
This tagrendering is only visible in the popup if the following condition is met: socket:chademo~.+ & socket:chademo!=0
This tagrendering has labels
@@ -512,14 +518,16 @@ The question is `How much plugs of type Type 1 with cable (J1772) are ava
*There are {socket:type1_cable} plugs of type Type 1 with cable (J1772) available here* is shown if `socket:type1_cable` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type1_cable~.+ & socket:type1_cable!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type1_cable
The question is `What voltage do the plugs with Type 1 with cable (J1772) offer?`
*Type 1 with cable (J1772) outputs {canonical(socket:type1_cable:voltage)}* is shown if `socket:type1_cable:voltage` is set
- - *Type 1 with cable (J1772) outputs 200 volt* is shown if with socket:type1_cable:voltage=200 V
- - *Type 1 with cable (J1772) outputs 240 volt* is shown if with socket:type1_cable:voltage=240 V
+ - *Type 1 with cable (J1772) outputs 200 volt* is shown if with socket:type1_cable:voltage=200
+ - *Type 1 with cable (J1772) outputs 240 volt* is shown if with socket:type1_cable:voltage=240
This tagrendering is only visible in the popup if the following condition is met: socket:type1_cable~.+ & socket:type1_cable!=0
This tagrendering has labels
@@ -530,7 +538,7 @@ This tagrendering has labels
The question is `What current do the plugs with Type 1 with cable (J1772) offer?`
*Type 1 with cable (J1772) outputs at most {canonical(socket:type1_cable:current)}* is shown if `socket:type1_cable:current` is set
- - *Type 1 with cable (J1772) outputs at most 32 A* is shown if with socket:type1_cable:current=32 A
+ - *Type 1 with cable (J1772) outputs at most 32 A* is shown if with socket:type1_cable:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:type1_cable~.+ & socket:type1_cable!=0
This tagrendering has labels
@@ -541,8 +549,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 1 with cable (J1772) offer?`
*Type 1 with cable (J1772) outputs at most {canonical(socket:type1_cable:output)}* is shown if `socket:type1_cable:output` is set
- - *Type 1 with cable (J1772) outputs at most 3.7 kW A* is shown if with socket:type1_cable:output=3.7 kW
- - *Type 1 with cable (J1772) outputs at most 7 kW A* is shown if with socket:type1_cable:output=7 kW
+ - *Type 1 with cable (J1772) outputs at most 3.7 kW* is shown if with socket:type1_cable:output=3.7 kW
+ - *Type 1 with cable (J1772) outputs at most 7 kW* is shown if with socket:type1_cable:output=7 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type1_cable~.+ & socket:type1_cable!=0
This tagrendering has labels
@@ -554,14 +562,16 @@ The question is `How much plugs of type Type 1 without cable (J177
*There are {socket:type1} plugs of type Type 1 without cable (J1772) available here* is shown if `socket:type1` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type1~.+ & socket:type1!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type1
The question is `What voltage do the plugs with Type 1 without cable (J1772) offer?`
*Type 1 without cable (J1772) outputs {canonical(socket:type1:voltage)}* is shown if `socket:type1:voltage` is set
- - *Type 1 without cable (J1772) outputs 200 volt* is shown if with socket:type1:voltage=200 V
- - *Type 1 without cable (J1772) outputs 240 volt* is shown if with socket:type1:voltage=240 V
+ - *Type 1 without cable (J1772) outputs 200 volt* is shown if with socket:type1:voltage=200
+ - *Type 1 without cable (J1772) outputs 240 volt* is shown if with socket:type1:voltage=240
This tagrendering is only visible in the popup if the following condition is met: socket:type1~.+ & socket:type1!=0
This tagrendering has labels
@@ -572,7 +582,7 @@ This tagrendering has labels
The question is `What current do the plugs with Type 1 without cable (J1772) offer?`
*Type 1 without cable (J1772) outputs at most {canonical(socket:type1:current)}* is shown if `socket:type1:current` is set
- - *Type 1 without cable (J1772) outputs at most 32 A* is shown if with socket:type1:current=32 A
+ - *Type 1 without cable (J1772) outputs at most 32 A* is shown if with socket:type1:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:type1~.+ & socket:type1!=0
This tagrendering has labels
@@ -583,10 +593,10 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 1 without cable (J1772) offer?`
*Type 1 without cable (J1772) outputs at most {canonical(socket:type1:output)}* is shown if `socket:type1:output` is set
- - *Type 1 without cable (J1772) outputs at most 3.7 kW A* is shown if with socket:type1:output=3.7 kW
- - *Type 1 without cable (J1772) outputs at most 6.6 kW A* is shown if with socket:type1:output=6.6 kW
- - *Type 1 without cable (J1772) outputs at most 7 kW A* is shown if with socket:type1:output=7 kW
- - *Type 1 without cable (J1772) outputs at most 7.2 kW A* is shown if with socket:type1:output=7.2 kW
+ - *Type 1 without cable (J1772) outputs at most 3.7 kW* is shown if with socket:type1:output=3.7 kW
+ - *Type 1 without cable (J1772) outputs at most 6.6 kW* is shown if with socket:type1:output=6.6 kW
+ - *Type 1 without cable (J1772) outputs at most 7 kW* is shown if with socket:type1:output=7 kW
+ - *Type 1 without cable (J1772) outputs at most 7.2 kW* is shown if with socket:type1:output=7.2 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type1~.+ & socket:type1!=0
This tagrendering has labels
@@ -598,14 +608,16 @@ The question is `How much plugs of type Type 1 CCS (aka Type 1 Combo) are
*There are {socket:type1_combo} plugs of type Type 1 CCS (aka Type 1 Combo) available here* is shown if `socket:type1_combo` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type1_combo~.+ & socket:type1_combo!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type1_combo
The question is `What voltage do the plugs with Type 1 CCS (aka Type 1 Combo) offer?`
*Type 1 CCS (aka Type 1 Combo) outputs {canonical(socket:type1_combo:voltage)}* is shown if `socket:type1_combo:voltage` is set
- - *Type 1 CCS (aka Type 1 Combo) outputs 400 volt* is shown if with socket:type1_combo:voltage=400 V
- - *Type 1 CCS (aka Type 1 Combo) outputs 1000 volt* is shown if with socket:type1_combo:voltage=1000 V
+ - *Type 1 CCS (aka Type 1 Combo) outputs 400 volt* is shown if with socket:type1_combo:voltage=400
+ - *Type 1 CCS (aka Type 1 Combo) outputs 1000 volt* is shown if with socket:type1_combo:voltage=1000
This tagrendering is only visible in the popup if the following condition is met: socket:type1_combo~.+ & socket:type1_combo!=0
This tagrendering has labels
@@ -616,8 +628,8 @@ This tagrendering has labels
The question is `What current do the plugs with Type 1 CCS (aka Type 1 Combo) offer?`
*Type 1 CCS (aka Type 1 Combo) outputs at most {canonical(socket:type1_combo:current)}* is shown if `socket:type1_combo:current` is set
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 50 A* is shown if with socket:type1_combo:current=50 A
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 125 A* is shown if with socket:type1_combo:current=125 A
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 50 A* is shown if with socket:type1_combo:current=50
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 125 A* is shown if with socket:type1_combo:current=125
This tagrendering is only visible in the popup if the following condition is met: socket:type1_combo~.+ & socket:type1_combo!=0
This tagrendering has labels
@@ -628,10 +640,10 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 1 CCS (aka Type 1 Combo) offer?`
*Type 1 CCS (aka Type 1 Combo) outputs at most {canonical(socket:type1_combo:output)}* is shown if `socket:type1_combo:output` is set
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 50 kW A* is shown if with socket:type1_combo:output=50 kW
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 62.5 kW A* is shown if with socket:type1_combo:output=62.5 kW
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 150 kW A* is shown if with socket:type1_combo:output=150 kW
- - *Type 1 CCS (aka Type 1 Combo) outputs at most 350 kW A* is shown if with socket:type1_combo:output=350 kW
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 50 kW* is shown if with socket:type1_combo:output=50 kW
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 62.5 kW* is shown if with socket:type1_combo:output=62.5 kW
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 150 kW* is shown if with socket:type1_combo:output=150 kW
+ - *Type 1 CCS (aka Type 1 Combo) outputs at most 350 kW* is shown if with socket:type1_combo:output=350 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type1_combo~.+ & socket:type1_combo!=0
This tagrendering has labels
@@ -643,13 +655,15 @@ The question is `How much plugs of type Tesla Supercharger are available
*There are {socket:tesla_supercharger} plugs of type Tesla Supercharger available here* is shown if `socket:tesla_supercharger` is set
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:tesla_supercharger
The question is `What voltage do the plugs with Tesla Supercharger offer?`
*Tesla Supercharger outputs {canonical(socket:tesla_supercharger:voltage)}* is shown if `socket:tesla_supercharger:voltage` is set
- - *Tesla Supercharger outputs 480 volt* is shown if with socket:tesla_supercharger:voltage=480 V
+ - *Tesla Supercharger outputs 480 volt* is shown if with socket:tesla_supercharger:voltage=480
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0
This tagrendering has labels
@@ -660,8 +674,8 @@ This tagrendering has labels
The question is `What current do the plugs with Tesla Supercharger offer?`
*Tesla Supercharger outputs at most {canonical(socket:tesla_supercharger:current)}* is shown if `socket:tesla_supercharger:current` is set
- - *Tesla Supercharger outputs at most 125 A* is shown if with socket:tesla_supercharger:current=125 A
- - *Tesla Supercharger outputs at most 350 A* is shown if with socket:tesla_supercharger:current=350 A
+ - *Tesla Supercharger outputs at most 125 A* is shown if with socket:tesla_supercharger:current=125
+ - *Tesla Supercharger outputs at most 350 A* is shown if with socket:tesla_supercharger:current=350
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0
This tagrendering has labels
@@ -672,9 +686,9 @@ This tagrendering has labels
The question is `What power output does a single plug of type Tesla Supercharger offer?`
*Tesla Supercharger outputs at most {canonical(socket:tesla_supercharger:output)}* is shown if `socket:tesla_supercharger:output` is set
- - *Tesla Supercharger outputs at most 120 kW A* is shown if with socket:tesla_supercharger:output=120 kW
- - *Tesla Supercharger outputs at most 150 kW A* is shown if with socket:tesla_supercharger:output=150 kW
- - *Tesla Supercharger outputs at most 250 kW A* is shown if with socket:tesla_supercharger:output=250 kW
+ - *Tesla Supercharger outputs at most 120 kW* is shown if with socket:tesla_supercharger:output=120 kW
+ - *Tesla Supercharger outputs at most 150 kW* is shown if with socket:tesla_supercharger:output=150 kW
+ - *Tesla Supercharger outputs at most 250 kW* is shown if with socket:tesla_supercharger:output=250 kW
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger~.+ & socket:tesla_supercharger!=0
This tagrendering has labels
@@ -686,14 +700,16 @@ The question is `How much plugs of type Type 2 (mennekes) are available h
*There are {socket:type2} plugs of type Type 2 (mennekes) available here* is shown if `socket:type2` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type2~.+ & socket:type2!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type2
The question is `What voltage do the plugs with Type 2 (mennekes) offer?`
*Type 2 (mennekes) outputs {canonical(socket:type2:voltage)}* is shown if `socket:type2:voltage` is set
- - *Type 2 (mennekes) outputs 230 volt* is shown if with socket:type2:voltage=230 V
- - *Type 2 (mennekes) outputs 400 volt* is shown if with socket:type2:voltage=400 V
+ - *Type 2 (mennekes) outputs 230 volt* is shown if with socket:type2:voltage=230
+ - *Type 2 (mennekes) outputs 400 volt* is shown if with socket:type2:voltage=400
This tagrendering is only visible in the popup if the following condition is met: socket:type2~.+ & socket:type2!=0
This tagrendering has labels
@@ -704,8 +720,8 @@ This tagrendering has labels
The question is `What current do the plugs with Type 2 (mennekes) offer?`
*Type 2 (mennekes) outputs at most {canonical(socket:type2:current)}* is shown if `socket:type2:current` is set
- - *Type 2 (mennekes) outputs at most 16 A* is shown if with socket:type2:current=16 A
- - *Type 2 (mennekes) outputs at most 32 A* is shown if with socket:type2:current=32 A
+ - *Type 2 (mennekes) outputs at most 16 A* is shown if with socket:type2:current=16
+ - *Type 2 (mennekes) outputs at most 32 A* is shown if with socket:type2:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:type2~.+ & socket:type2!=0
This tagrendering has labels
@@ -716,8 +732,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 2 (mennekes) offer?`
*Type 2 (mennekes) outputs at most {canonical(socket:type2:output)}* is shown if `socket:type2:output` is set
- - *Type 2 (mennekes) outputs at most 11 kW A* is shown if with socket:type2:output=11 kW
- - *Type 2 (mennekes) outputs at most 22 kW A* is shown if with socket:type2:output=22 kW
+ - *Type 2 (mennekes) outputs at most 11 kW* is shown if with socket:type2:output=11 kW
+ - *Type 2 (mennekes) outputs at most 22 kW* is shown if with socket:type2:output=22 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type2~.+ & socket:type2!=0
This tagrendering has labels
@@ -729,14 +745,16 @@ The question is `How much plugs of type Type 2 CCS (mennekes) are availab
*There are {socket:type2_combo} plugs of type Type 2 CCS (mennekes) available here* is shown if `socket:type2_combo` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type2_combo~.+ & socket:type2_combo!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type2_combo
The question is `What voltage do the plugs with Type 2 CCS (mennekes) offer?`
*Type 2 CCS (mennekes) outputs {canonical(socket:type2_combo:voltage)}* is shown if `socket:type2_combo:voltage` is set
- - *Type 2 CCS (mennekes) outputs 500 volt* is shown if with socket:type2_combo:voltage=500 V
- - *Type 2 CCS (mennekes) outputs 920 volt* is shown if with socket:type2_combo:voltage=920 V
+ - *Type 2 CCS (mennekes) outputs 500 volt* is shown if with socket:type2_combo:voltage=500
+ - *Type 2 CCS (mennekes) outputs 920 volt* is shown if with socket:type2_combo:voltage=920
This tagrendering is only visible in the popup if the following condition is met: socket:type2_combo~.+ & socket:type2_combo!=0
This tagrendering has labels
@@ -747,8 +765,8 @@ This tagrendering has labels
The question is `What current do the plugs with Type 2 CCS (mennekes) offer?`
*Type 2 CCS (mennekes) outputs at most {canonical(socket:type2_combo:current)}* is shown if `socket:type2_combo:current` is set
- - *Type 2 CCS (mennekes) outputs at most 125 A* is shown if with socket:type2_combo:current=125 A
- - *Type 2 CCS (mennekes) outputs at most 350 A* is shown if with socket:type2_combo:current=350 A
+ - *Type 2 CCS (mennekes) outputs at most 125 A* is shown if with socket:type2_combo:current=125
+ - *Type 2 CCS (mennekes) outputs at most 350 A* is shown if with socket:type2_combo:current=350
This tagrendering is only visible in the popup if the following condition is met: socket:type2_combo~.+ & socket:type2_combo!=0
This tagrendering has labels
@@ -759,7 +777,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 2 CCS (mennekes) offer?`
*Type 2 CCS (mennekes) outputs at most {canonical(socket:type2_combo:output)}* is shown if `socket:type2_combo:output` is set
- - *Type 2 CCS (mennekes) outputs at most 50 kW A* is shown if with socket:type2_combo:output=50 kW
+ - *Type 2 CCS (mennekes) outputs at most 50 kW* is shown if with socket:type2_combo:output=50 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type2_combo~.+ & socket:type2_combo!=0
This tagrendering has labels
@@ -771,14 +789,16 @@ The question is `How much plugs of type Type 2 with cable (mennekes) are
*There are {socket:type2_cable} plugs of type Type 2 with cable (mennekes) available here* is shown if `socket:type2_cable` is set
This tagrendering is only visible in the popup if the following condition is met: socket:type2_cable~.+ & socket:type2_cable!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:type2_cable
The question is `What voltage do the plugs with Type 2 with cable (mennekes) offer?`
*Type 2 with cable (mennekes) outputs {canonical(socket:type2_cable:voltage)}* is shown if `socket:type2_cable:voltage` is set
- - *Type 2 with cable (mennekes) outputs 230 volt* is shown if with socket:type2_cable:voltage=230 V
- - *Type 2 with cable (mennekes) outputs 400 volt* is shown if with socket:type2_cable:voltage=400 V
+ - *Type 2 with cable (mennekes) outputs 230 volt* is shown if with socket:type2_cable:voltage=230
+ - *Type 2 with cable (mennekes) outputs 400 volt* is shown if with socket:type2_cable:voltage=400
This tagrendering is only visible in the popup if the following condition is met: socket:type2_cable~.+ & socket:type2_cable!=0
This tagrendering has labels
@@ -789,8 +809,8 @@ This tagrendering has labels
The question is `What current do the plugs with Type 2 with cable (mennekes) offer?`
*Type 2 with cable (mennekes) outputs at most {canonical(socket:type2_cable:current)}* is shown if `socket:type2_cable:current` is set
- - *Type 2 with cable (mennekes) outputs at most 16 A* is shown if with socket:type2_cable:current=16 A
- - *Type 2 with cable (mennekes) outputs at most 32 A* is shown if with socket:type2_cable:current=32 A
+ - *Type 2 with cable (mennekes) outputs at most 16 A* is shown if with socket:type2_cable:current=16
+ - *Type 2 with cable (mennekes) outputs at most 32 A* is shown if with socket:type2_cable:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:type2_cable~.+ & socket:type2_cable!=0
This tagrendering has labels
@@ -801,8 +821,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type Type 2 with cable (mennekes) offer?`
*Type 2 with cable (mennekes) outputs at most {canonical(socket:type2_cable:output)}* is shown if `socket:type2_cable:output` is set
- - *Type 2 with cable (mennekes) outputs at most 11 kW A* is shown if with socket:type2_cable:output=11 kW
- - *Type 2 with cable (mennekes) outputs at most 22 kW A* is shown if with socket:type2_cable:output=22 kW
+ - *Type 2 with cable (mennekes) outputs at most 11 kW* is shown if with socket:type2_cable:output=11 kW
+ - *Type 2 with cable (mennekes) outputs at most 22 kW* is shown if with socket:type2_cable:output=22 kW
This tagrendering is only visible in the popup if the following condition is met: socket:type2_cable~.+ & socket:type2_cable!=0
This tagrendering has labels
@@ -814,14 +834,16 @@ The question is `How much plugs of type Tesla Supercharger CCS (a branded
*There are {socket:tesla_supercharger_ccs} plugs of type Tesla Supercharger CCS (a branded type2_css) available here* is shown if `socket:tesla_supercharger_ccs` is set
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:tesla_supercharger_ccs
The question is `What voltage do the plugs with Tesla Supercharger CCS (a branded type2_css) offer?`
*Tesla Supercharger CCS (a branded type2_css) outputs {canonical(socket:tesla_supercharger_ccs:voltage)}* is shown if `socket:tesla_supercharger_ccs:voltage` is set
- - *Tesla Supercharger CCS (a branded type2_css) outputs 500 volt* is shown if with socket:tesla_supercharger_ccs:voltage=500 V
- - *Tesla Supercharger CCS (a branded type2_css) outputs 920 volt* is shown if with socket:tesla_supercharger_ccs:voltage=920 V
+ - *Tesla Supercharger CCS (a branded type2_css) outputs 500 volt* is shown if with socket:tesla_supercharger_ccs:voltage=500
+ - *Tesla Supercharger CCS (a branded type2_css) outputs 920 volt* is shown if with socket:tesla_supercharger_ccs:voltage=920
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0
This tagrendering has labels
@@ -832,8 +854,8 @@ This tagrendering has labels
The question is `What current do the plugs with Tesla Supercharger CCS (a branded type2_css) offer?`
*Tesla Supercharger CCS (a branded type2_css) outputs at most {canonical(socket:tesla_supercharger_ccs:current)}* is shown if `socket:tesla_supercharger_ccs:current` is set
- - *Tesla Supercharger CCS (a branded type2_css) outputs at most 125 A* is shown if with socket:tesla_supercharger_ccs:current=125 A
- - *Tesla Supercharger CCS (a branded type2_css) outputs at most 350 A* is shown if with socket:tesla_supercharger_ccs:current=350 A
+ - *Tesla Supercharger CCS (a branded type2_css) outputs at most 125 A* is shown if with socket:tesla_supercharger_ccs:current=125
+ - *Tesla Supercharger CCS (a branded type2_css) outputs at most 350 A* is shown if with socket:tesla_supercharger_ccs:current=350
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0
This tagrendering has labels
@@ -844,7 +866,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type Tesla Supercharger CCS (a branded type2_css) offer?`
*Tesla Supercharger CCS (a branded type2_css) outputs at most {canonical(socket:tesla_supercharger_ccs:output)}* is shown if `socket:tesla_supercharger_ccs:output` is set
- - *Tesla Supercharger CCS (a branded type2_css) outputs at most 50 kW A* is shown if with socket:tesla_supercharger_ccs:output=50 kW
+ - *Tesla Supercharger CCS (a branded type2_css) outputs at most 50 kW* is shown if with socket:tesla_supercharger_ccs:output=50 kW
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_supercharger_ccs~.+ & socket:tesla_supercharger_ccs!=0
This tagrendering has labels
@@ -856,13 +878,15 @@ The question is `How much plugs of type Tesla Supercharger (destination)
*There are {socket:tesla_destination} plugs of type Tesla Supercharger (destination) available here* is shown if `socket:tesla_destination` is set
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:tesla_destination_us
The question is `What voltage do the plugs with Tesla Supercharger (destination) offer?`
*Tesla Supercharger (destination) outputs {canonical(socket:tesla_destination:voltage)}* is shown if `socket:tesla_destination:voltage` is set
- - *Tesla Supercharger (destination) outputs 480 volt* is shown if with socket:tesla_destination:voltage=480 V
+ - *Tesla Supercharger (destination) outputs 480 volt* is shown if with socket:tesla_destination:voltage=480
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -873,8 +897,8 @@ This tagrendering has labels
The question is `What current do the plugs with Tesla Supercharger (destination) offer?`
*Tesla Supercharger (destination) outputs at most {canonical(socket:tesla_destination:current)}* is shown if `socket:tesla_destination:current` is set
- - *Tesla Supercharger (destination) outputs at most 125 A* is shown if with socket:tesla_destination:current=125 A
- - *Tesla Supercharger (destination) outputs at most 350 A* is shown if with socket:tesla_destination:current=350 A
+ - *Tesla Supercharger (destination) outputs at most 125 A* is shown if with socket:tesla_destination:current=125
+ - *Tesla Supercharger (destination) outputs at most 350 A* is shown if with socket:tesla_destination:current=350
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -885,9 +909,9 @@ This tagrendering has labels
The question is `What power output does a single plug of type Tesla Supercharger (destination) offer?`
*Tesla Supercharger (destination) outputs at most {canonical(socket:tesla_destination:output)}* is shown if `socket:tesla_destination:output` is set
- - *Tesla Supercharger (destination) outputs at most 120 kW A* is shown if with socket:tesla_destination:output=120 kW
- - *Tesla Supercharger (destination) outputs at most 150 kW A* is shown if with socket:tesla_destination:output=150 kW
- - *Tesla Supercharger (destination) outputs at most 250 kW A* is shown if with socket:tesla_destination:output=250 kW
+ - *Tesla Supercharger (destination) outputs at most 120 kW* is shown if with socket:tesla_destination:output=120 kW
+ - *Tesla Supercharger (destination) outputs at most 150 kW* is shown if with socket:tesla_destination:output=150 kW
+ - *Tesla Supercharger (destination) outputs at most 250 kW* is shown if with socket:tesla_destination:output=250 kW
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -899,14 +923,16 @@ The question is `How much plugs of type Tesla supercharger (destination)
*There are {socket:tesla_destination} plugs of type Tesla supercharger (destination) (A Type 2 with cable branded as tesla) available here* is shown if `socket:tesla_destination` is set
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:tesla_destination
The question is `What voltage do the plugs with Tesla supercharger (destination) (A Type 2 with cable branded as tesla) offer?`
*Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs {canonical(socket:tesla_destination:voltage)}* is shown if `socket:tesla_destination:voltage` is set
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 230 volt* is shown if with socket:tesla_destination:voltage=230 V
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 400 volt* is shown if with socket:tesla_destination:voltage=400 V
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 230 volt* is shown if with socket:tesla_destination:voltage=230
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs 400 volt* is shown if with socket:tesla_destination:voltage=400
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -917,8 +943,8 @@ This tagrendering has labels
The question is `What current do the plugs with Tesla supercharger (destination) (A Type 2 with cable branded as tesla) offer?`
*Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most {canonical(socket:tesla_destination:current)}* is shown if `socket:tesla_destination:current` is set
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 16 A* is shown if with socket:tesla_destination:current=16 A
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 32 A* is shown if with socket:tesla_destination:current=32 A
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 16 A* is shown if with socket:tesla_destination:current=16
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 32 A* is shown if with socket:tesla_destination:current=32
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -929,8 +955,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type Tesla supercharger (destination) (A Type 2 with cable branded as tesla) offer?`
*Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most {canonical(socket:tesla_destination:output)}* is shown if `socket:tesla_destination:output` is set
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 11 kW A* is shown if with socket:tesla_destination:output=11 kW
- - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 22 kW A* is shown if with socket:tesla_destination:output=22 kW
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 11 kW* is shown if with socket:tesla_destination:output=11 kW
+ - *Tesla supercharger (destination) (A Type 2 with cable branded as tesla) outputs at most 22 kW* is shown if with socket:tesla_destination:output=22 kW
This tagrendering is only visible in the popup if the following condition is met: socket:tesla_destination~.+ & socket:tesla_destination!=0
This tagrendering has labels
@@ -942,13 +968,15 @@ The question is `How much plugs of type USB to charge phones and small el
*There are {socket:USB-A} plugs of type USB to charge phones and small electronics available here* is shown if `socket:USB-A` is set
This tagrendering is only visible in the popup if the following condition is met: socket:USB-A~.+ & socket:USB-A!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:USB-A
The question is `What voltage do the plugs with USB to charge phones and small electronics offer?`
*USB to charge phones and small electronics outputs {canonical(socket:USB-A:voltage)}* is shown if `socket:USB-A:voltage` is set
- - *USB to charge phones and small electronics outputs 5 volt* is shown if with socket:USB-A:voltage=5 V
+ - *USB to charge phones and small electronics outputs 5 volt* is shown if with socket:USB-A:voltage=5
This tagrendering is only visible in the popup if the following condition is met: socket:USB-A~.+ & socket:USB-A!=0
This tagrendering has labels
@@ -959,8 +987,8 @@ This tagrendering has labels
The question is `What current do the plugs with USB to charge phones and small electronics offer?`
*USB to charge phones and small electronics outputs at most {canonical(socket:USB-A:current)}* is shown if `socket:USB-A:current` is set
- - *USB to charge phones and small electronics outputs at most 1 A* is shown if with socket:USB-A:current=1 A
- - *USB to charge phones and small electronics outputs at most 2 A* is shown if with socket:USB-A:current=2 A
+ - *USB to charge phones and small electronics outputs at most 1 A* is shown if with socket:USB-A:current=1
+ - *USB to charge phones and small electronics outputs at most 2 A* is shown if with socket:USB-A:current=2
This tagrendering is only visible in the popup if the following condition is met: socket:USB-A~.+ & socket:USB-A!=0
This tagrendering has labels
@@ -971,8 +999,8 @@ This tagrendering has labels
The question is `What power output does a single plug of type USB to charge phones and small electronics offer?`
*USB to charge phones and small electronics outputs at most {canonical(socket:USB-A:output)}* is shown if `socket:USB-A:output` is set
- - *USB to charge phones and small electronics outputs at most 5W A* is shown if with socket:USB-A:output=5W
- - *USB to charge phones and small electronics outputs at most 10W A* is shown if with socket:USB-A:output=10W
+ - *USB to charge phones and small electronics outputs at most 5W* is shown if with socket:USB-A:output=5W
+ - *USB to charge phones and small electronics outputs at most 10W* is shown if with socket:USB-A:output=10W
This tagrendering is only visible in the popup if the following condition is met: socket:USB-A~.+ & socket:USB-A!=0
This tagrendering has labels
@@ -984,6 +1012,8 @@ The question is `How much plugs of type Bosch Active Connect with 3 pins
*There are {socket:bosch_3pin} plugs of type Bosch Active Connect with 3 pins and cable available here* is shown if `socket:bosch_3pin` is set
This tagrendering is only visible in the popup if the following condition is met: socket:bosch_3pin~.+ & socket:bosch_3pin!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:bosch_3pin
@@ -1018,6 +1048,8 @@ The question is `How much plugs of type Bosch Active Connect with 5 pins
*There are {socket:bosch_5pin} plugs of type Bosch Active Connect with 5 pins and cable available here* is shown if `socket:bosch_5pin` is set
This tagrendering is only visible in the popup if the following condition is met: socket:bosch_5pin~.+ & socket:bosch_5pin!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:bosch_5pin
@@ -1052,13 +1084,15 @@ The question is `How much plugs of type BS1363 (Type G) are available her
*There are {socket:bs1363} plugs of type BS1363 (Type G) available here* is shown if `socket:bs1363` is set
This tagrendering is only visible in the popup if the following condition is met: socket:bs1363~.+ & socket:bs1363!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:bs1363
The question is `What voltage do the plugs with BS1363 (Type G) offer?`
*BS1363 (Type G) outputs {canonical(socket:bs1363:voltage)}* is shown if `socket:bs1363:voltage` is set
- - *BS1363 (Type G) outputs 230 volt* is shown if with socket:bs1363:voltage=230 V
+ - *BS1363 (Type G) outputs 230 volt* is shown if with socket:bs1363:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:bs1363~.+ & socket:bs1363!=0
This tagrendering has labels
@@ -1069,7 +1103,7 @@ This tagrendering has labels
The question is `What current do the plugs with BS1363 (Type G) offer?`
*BS1363 (Type G) outputs at most {canonical(socket:bs1363:current)}* is shown if `socket:bs1363:current` is set
- - *BS1363 (Type G) outputs at most 13 A* is shown if with socket:bs1363:current=13 A
+ - *BS1363 (Type G) outputs at most 13 A* is shown if with socket:bs1363:current=13
This tagrendering is only visible in the popup if the following condition is met: socket:bs1363~.+ & socket:bs1363!=0
This tagrendering has labels
@@ -1080,7 +1114,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type BS1363 (Type G) offer?`
*BS1363 (Type G) outputs at most {canonical(socket:bs1363:output)}* is shown if `socket:bs1363:output` is set
- - *BS1363 (Type G) outputs at most 3kW A* is shown if with socket:bs1363:output=3kW
+ - *BS1363 (Type G) outputs at most 3kW* is shown if with socket:bs1363:output=3kW
This tagrendering is only visible in the popup if the following condition is met: socket:bs1363~.+ & socket:bs1363!=0
This tagrendering has labels
@@ -1092,13 +1126,15 @@ The question is `How much plugs of type NEMA 5-15 (Type B) are available
*There are {socket:nema5_15} plugs of type NEMA 5-15 (Type B) available here* is shown if `socket:nema5_15` is set
This tagrendering is only visible in the popup if the following condition is met: socket:nema5_15~.+ & socket:nema5_15!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:nema5_15
The question is `What voltage do the plugs with NEMA 5-15 (Type B) offer?`
*NEMA 5-15 (Type B) outputs {canonical(socket:nema5_15:voltage)}* is shown if `socket:nema5_15:voltage` is set
- - *NEMA 5-15 (Type B) outputs 120 volt* is shown if with socket:nema5_15:voltage=120 V
+ - *NEMA 5-15 (Type B) outputs 120 volt* is shown if with socket:nema5_15:voltage=120
This tagrendering is only visible in the popup if the following condition is met: socket:nema5_15~.+ & socket:nema5_15!=0
This tagrendering has labels
@@ -1109,7 +1145,7 @@ This tagrendering has labels
The question is `What current do the plugs with NEMA 5-15 (Type B) offer?`
*NEMA 5-15 (Type B) outputs at most {canonical(socket:nema5_15:current)}* is shown if `socket:nema5_15:current` is set
- - *NEMA 5-15 (Type B) outputs at most 15 A* is shown if with socket:nema5_15:current=15 A
+ - *NEMA 5-15 (Type B) outputs at most 15 A* is shown if with socket:nema5_15:current=15
This tagrendering is only visible in the popup if the following condition is met: socket:nema5_15~.+ & socket:nema5_15!=0
This tagrendering has labels
@@ -1120,7 +1156,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type NEMA 5-15 (Type B) offer?`
*NEMA 5-15 (Type B) outputs at most {canonical(socket:nema5_15:output)}* is shown if `socket:nema5_15:output` is set
- - *NEMA 5-15 (Type B) outputs at most 1.8 kW A* is shown if with socket:nema5_15:output=1.8 kW
+ - *NEMA 5-15 (Type B) outputs at most 1.8 kW* is shown if with socket:nema5_15:output=1.8 kW
This tagrendering is only visible in the popup if the following condition is met: socket:nema5_15~.+ & socket:nema5_15!=0
This tagrendering has labels
@@ -1132,13 +1168,15 @@ The question is `How much plugs of type SEV 1011 T23 (Type J) are availab
*There are {socket:sev1011_t23} plugs of type SEV 1011 T23 (Type J) available here* is shown if `socket:sev1011_t23` is set
This tagrendering is only visible in the popup if the following condition is met: socket:sev1011_t23~.+ & socket:sev1011_t23!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:sev1011_t23
The question is `What voltage do the plugs with SEV 1011 T23 (Type J) offer?`
*SEV 1011 T23 (Type J) outputs {canonical(socket:sev1011_t23:voltage)}* is shown if `socket:sev1011_t23:voltage` is set
- - *SEV 1011 T23 (Type J) outputs 230 volt* is shown if with socket:sev1011_t23:voltage=230 V
+ - *SEV 1011 T23 (Type J) outputs 230 volt* is shown if with socket:sev1011_t23:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:sev1011_t23~.+ & socket:sev1011_t23!=0
This tagrendering has labels
@@ -1149,7 +1187,7 @@ This tagrendering has labels
The question is `What current do the plugs with SEV 1011 T23 (Type J) offer?`
*SEV 1011 T23 (Type J) outputs at most {canonical(socket:sev1011_t23:current)}* is shown if `socket:sev1011_t23:current` is set
- - *SEV 1011 T23 (Type J) outputs at most 16 A* is shown if with socket:sev1011_t23:current=16 A
+ - *SEV 1011 T23 (Type J) outputs at most 16 A* is shown if with socket:sev1011_t23:current=16
This tagrendering is only visible in the popup if the following condition is met: socket:sev1011_t23~.+ & socket:sev1011_t23!=0
This tagrendering has labels
@@ -1160,7 +1198,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type SEV 1011 T23 (Type J) offer?`
*SEV 1011 T23 (Type J) outputs at most {canonical(socket:sev1011_t23:output)}* is shown if `socket:sev1011_t23:output` is set
- - *SEV 1011 T23 (Type J) outputs at most 3.7 kW A* is shown if with socket:sev1011_t23:output=3.7 kW
+ - *SEV 1011 T23 (Type J) outputs at most 3.7 kW* is shown if with socket:sev1011_t23:output=3.7 kW
This tagrendering is only visible in the popup if the following condition is met: socket:sev1011_t23~.+ & socket:sev1011_t23!=0
This tagrendering has labels
@@ -1172,13 +1210,15 @@ The question is `How much plugs of type AS3112 (Type I) are available her
*There are {socket:as3112} plugs of type AS3112 (Type I) available here* is shown if `socket:as3112` is set
This tagrendering is only visible in the popup if the following condition is met: socket:as3112~.+ & socket:as3112!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:as3112
The question is `What voltage do the plugs with AS3112 (Type I) offer?`
*AS3112 (Type I) outputs {canonical(socket:as3112:voltage)}* is shown if `socket:as3112:voltage` is set
- - *AS3112 (Type I) outputs 230 volt* is shown if with socket:as3112:voltage=230 V
+ - *AS3112 (Type I) outputs 230 volt* is shown if with socket:as3112:voltage=230
This tagrendering is only visible in the popup if the following condition is met: socket:as3112~.+ & socket:as3112!=0
This tagrendering has labels
@@ -1189,7 +1229,7 @@ This tagrendering has labels
The question is `What current do the plugs with AS3112 (Type I) offer?`
*AS3112 (Type I) outputs at most {canonical(socket:as3112:current)}* is shown if `socket:as3112:current` is set
- - *AS3112 (Type I) outputs at most 10 A* is shown if with socket:as3112:current=10 A
+ - *AS3112 (Type I) outputs at most 10 A* is shown if with socket:as3112:current=10
This tagrendering is only visible in the popup if the following condition is met: socket:as3112~.+ & socket:as3112!=0
This tagrendering has labels
@@ -1200,7 +1240,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type AS3112 (Type I) offer?`
*AS3112 (Type I) outputs at most {canonical(socket:as3112:output)}* is shown if `socket:as3112:output` is set
- - *AS3112 (Type I) outputs at most 2.3 kW A* is shown if with socket:as3112:output=2.3 kW
+ - *AS3112 (Type I) outputs at most 2.3 kW* is shown if with socket:as3112:output=2.3 kW
This tagrendering is only visible in the popup if the following condition is met: socket:as3112~.+ & socket:as3112!=0
This tagrendering has labels
@@ -1212,13 +1252,15 @@ The question is `How much plugs of type NEMA 5-20 (Type B) are available
*There are {socket:nema_5_20} plugs of type NEMA 5-20 (Type B) available here* is shown if `socket:nema_5_20` is set
This tagrendering is only visible in the popup if the following condition is met: socket:nema_5_20~.+ & socket:nema_5_20!=0
+This tagrendering has labels
+`plugs-amount`
### voltage-socket:nema_5_20
The question is `What voltage do the plugs with NEMA 5-20 (Type B) offer?`
*NEMA 5-20 (Type B) outputs {canonical(socket:nema_5_20:voltage)}* is shown if `socket:nema_5_20:voltage` is set
- - *NEMA 5-20 (Type B) outputs 120 volt* is shown if with socket:nema_5_20:voltage=120 V
+ - *NEMA 5-20 (Type B) outputs 120 volt* is shown if with socket:nema_5_20:voltage=120
This tagrendering is only visible in the popup if the following condition is met: socket:nema_5_20~.+ & socket:nema_5_20!=0
This tagrendering has labels
@@ -1229,7 +1271,7 @@ This tagrendering has labels
The question is `What current do the plugs with NEMA 5-20 (Type B) offer?`
*NEMA 5-20 (Type B) outputs at most {canonical(socket:nema_5_20:current)}* is shown if `socket:nema_5_20:current` is set
- - *NEMA 5-20 (Type B) outputs at most 20 A* is shown if with socket:nema_5_20:current=20 A
+ - *NEMA 5-20 (Type B) outputs at most 20 A* is shown if with socket:nema_5_20:current=20
This tagrendering is only visible in the popup if the following condition is met: socket:nema_5_20~.+ & socket:nema_5_20!=0
This tagrendering has labels
@@ -1240,7 +1282,7 @@ This tagrendering has labels
The question is `What power output does a single plug of type NEMA 5-20 (Type B) offer?`
*NEMA 5-20 (Type B) outputs at most {canonical(socket:nema_5_20:output)}* is shown if `socket:nema_5_20:output` is set
- - *NEMA 5-20 (Type B) outputs at most 2.4 kW A* is shown if with socket:nema_5_20:output=2.4 kW
+ - *NEMA 5-20 (Type B) outputs at most 2.4 kW* is shown if with socket:nema_5_20:output=2.4 kW
This tagrendering is only visible in the popup if the following condition is met: socket:nema_5_20~.+ & socket:nema_5_20!=0
This tagrendering has labels
diff --git a/Docs/URL_Parameters.md b/Docs/URL_Parameters.md
index a33b8e80d..968e14b09 100644
--- a/Docs/URL_Parameters.md
+++ b/Docs/URL_Parameters.md
@@ -410,7 +410,7 @@ The default value is _0_
The mode the application starts in, e.g. 'map', 'dashboard' or 'statistics'
-This documentation is defined in the source code at [generateDocs.ts](ervdvn/git/MapComplete/scripts/generateDocs.ts#L436)
+This documentation is defined in the source code at [generateDocs.ts](ervdvn/git2/MapComplete/scripts/generateDocs.ts#L436)
The default value is _map_
diff --git a/Docs/wikiIndex.txt b/Docs/wikiIndex.txt
index f35a607af..c5e79033e 100644
--- a/Docs/wikiIndex.txt
+++ b/Docs/wikiIndex.txt
@@ -580,6 +580,15 @@ The position of a signpost can be used by a hiker/biker/rider/s…
|genre= POI, editor, rainbow_crossings
}}
{{service_item
+|name= [https://mapcomplete.org/scouting scouting]
+|region= Worldwide
+|lang= {{#language:en|en}}
+|descr= A MapComplete theme: A scouting group is a social youth movement with a heavy emphasis on the outdoors
+|material= {{yes|[https://mapcomplete.org/ Yes]}}
+|image= MapComplete_Screenshot.png
+|genre= POI, editor, scouting
+}}
+{{service_item
|name= [https://mapcomplete.org/ski ski]
|region= Worldwide
|lang= {{#language:en|en}}, {{#language:de|en}}, {{#language:es|en}}, {{#language:cs|en}}, {{#language:uk|en}}, {{#language:fr|en}}, {{#language:nl|en}}, {{#language:ko|en}}
@@ -618,7 +627,7 @@ The position of a signpost can be used by a hiker/biker/rider/s…
{{service_item
|name= [https://mapcomplete.org/trees trees]
|region= Worldwide
-|lang= {{#language:en|en}}, {{#language:nl|en}}, {{#language:fr|en}}, {{#language:it|en}}, {{#language:ja|en}}, {{#language:zh_Hant|en}}, {{#language:ru|en}}, {{#language:pl|en}}, {{#language:de|en}}, {{#language:nb_NO|en}}, {{#language:hu|en}}, {{#language:ca|en}}, {{#language:es|en}}, {{#language:da|en}}, {{#language:cs|en}}, {{#language:uk|en}}, {{#language:ko|en}}
+|lang= {{#language:en|en}}, {{#language:nl|en}}, {{#language:fr|en}}, {{#language:it|en}}, {{#language:ja|en}}, {{#language:zh_Hant|en}}, {{#language:ru|en}}, {{#language:pl|en}}, {{#language:de|en}}, {{#language:nb_NO|en}}, {{#language:hu|en}}, {{#language:ca|en}}, {{#language:es|en}}, {{#language:da|en}}, {{#language:cs|en}}, {{#language:uk|en}}, {{#language:ko|en}}, {{#language:pt|en}}
|descr= A MapComplete theme: Map all the trees
|material= {{yes|[https://mapcomplete.org/ Yes]}}
|image= MapComplete_Screenshot.png
diff --git a/assets/layers/charging_station/charging_station.json b/assets/layers/charging_station/charging_station.json
index 07bb77f5b..f308cf6ba 100644
--- a/assets/layers/charging_station/charging_station.json
+++ b/assets/layers/charging_station/charging_station.json
@@ -8,15 +8,7 @@
"de": "Ladestationen",
"es": "Puntos de carga"
},
- "description": {
- "en": "A charging station",
- "nl": "Oplaadpunten",
- "ca": "Una estació de càrrega",
- "cs": "Nabíjecí stanice",
- "de": "Eine Ladestation",
- "es": "Un punto de carga",
- "fr": "Une station de recharge"
- },
+ "minzoom": 10,
"source": {
"osmTags": {
"and": [
@@ -31,7 +23,6 @@
]
}
},
- "minzoom": 10,
"title": {
"render": {
"en": "Charging station",
@@ -80,114 +71,16 @@
}
]
},
- "pointRendering": [
- {
- "location": [
- "point",
- "centroid"
- ],
- "marker": [
- {
- "icon": "pin",
- "color": "#fff"
- },
- {
- "icon": {
- "render": "./assets/themes/charging_stations/plug.svg",
- "mappings": [
- {
- "if": "bicycle=yes",
- "then": "./assets/themes/charging_stations/bicycle.svg"
- },
- {
- "if": {
- "or": [
- "car=yes",
- "motorcar=yes"
- ]
- },
- "then": "./assets/themes/charging_stations/car.svg"
- }
- ]
- }
- }
- ],
- "iconBadges": [
- {
- "if": {
- "or": [
- "disused:amenity=charging_station",
- "operational_status=broken"
- ]
- },
- "then": "close:#c22;"
- },
- {
- "if": {
- "or": [
- "proposed:amenity=charging_station",
- "planned:amenity=charging_station"
- ]
- },
- "then": "./assets/layers/charging_station/under_construction.svg"
- },
- {
- "if": {
- "and": [
- "bicycle=yes",
- {
- "or": [
- "motorcar=yes",
- "car=yes"
- ]
- }
- ]
- },
- "then": "circle:#fff;./assets/themes/charging_stations/car.svg"
- }
- ],
- "anchor": "bottom",
- "iconSize": "50,50"
- }
- ],
- "lineRendering": [
- {
- "color": "black",
- "width": 2,
- "fillColor": "#80808080"
- }
- ],
- "presets": [
- {
- "tags": [
- "amenity=charging_station",
- "motorcar=no",
- "bicycle=yes"
- ],
- "title": {
- "en": "charging station for electrical bikes",
- "nl": "oplaadpunt voor elektrische fietsen",
- "cs": "nabíjecí stanice pro elektrokola",
- "de": "Ladestation für Elektrofahrräder",
- "es": "punto de carga para bicicletas eléctricas"
- }
- },
- {
- "tags": [
- "amenity=charging_station",
- "motorcar=yes",
- "bicycle=no"
- ],
- "title": {
- "en": "charging station for cars",
- "nl": "oplaadstation voor elektrische auto's",
- "ca": "estació de càrrega per a cotxes",
- "cs": "nabíjecí stanice pro auta",
- "de": "Ladestation für Autos",
- "es": "punto de carga para coches"
- }
- }
- ],
+ "description": {
+ "en": "A charging station",
+ "nl": "Oplaadpunten",
+ "ca": "Una estació de càrrega",
+ "cs": "Nabíjecí stanice",
+ "de": "Eine Ladestation",
+ "es": "Un punto de carga",
+ "fr": "Une station de recharge"
+ },
+ "#": "no-question-hint-check",
"tagRenderings": [
"images",
{
@@ -3097,6 +2990,114 @@
}
}
],
+ "lineRendering": [
+ {
+ "color": "black",
+ "width": 2,
+ "fillColor": "#80808080"
+ }
+ ],
+ "pointRendering": [
+ {
+ "location": [
+ "point",
+ "centroid"
+ ],
+ "marker": [
+ {
+ "icon": "pin",
+ "color": "#fff"
+ },
+ {
+ "icon": {
+ "render": "./assets/themes/charging_stations/plug.svg",
+ "mappings": [
+ {
+ "if": "bicycle=yes",
+ "then": "./assets/themes/charging_stations/bicycle.svg"
+ },
+ {
+ "if": {
+ "or": [
+ "car=yes",
+ "motorcar=yes"
+ ]
+ },
+ "then": "./assets/themes/charging_stations/car.svg"
+ }
+ ]
+ }
+ }
+ ],
+ "iconBadges": [
+ {
+ "if": {
+ "or": [
+ "disused:amenity=charging_station",
+ "operational_status=broken"
+ ]
+ },
+ "then": "close:#c22;"
+ },
+ {
+ "if": {
+ "or": [
+ "proposed:amenity=charging_station",
+ "planned:amenity=charging_station"
+ ]
+ },
+ "then": "./assets/layers/charging_station/under_construction.svg"
+ },
+ {
+ "if": {
+ "and": [
+ "bicycle=yes",
+ {
+ "or": [
+ "motorcar=yes",
+ "car=yes"
+ ]
+ }
+ ]
+ },
+ "then": "circle:#fff;./assets/themes/charging_stations/car.svg"
+ }
+ ],
+ "anchor": "bottom",
+ "iconSize": "50,50"
+ }
+ ],
+ "presets": [
+ {
+ "tags": [
+ "amenity=charging_station",
+ "motorcar=no",
+ "bicycle=yes"
+ ],
+ "title": {
+ "en": "charging station for electrical bikes",
+ "nl": "oplaadpunt voor elektrische fietsen",
+ "cs": "nabíjecí stanice pro elektrokola",
+ "de": "Ladestation für Elektrofahrräder",
+ "es": "punto de carga para bicicletas eléctricas"
+ }
+ },
+ {
+ "tags": [
+ "amenity=charging_station",
+ "motorcar=yes",
+ "bicycle=no"
+ ],
+ "title": {
+ "en": "charging station for cars",
+ "nl": "oplaadstation voor elektrische auto's",
+ "ca": "estació de càrrega per a cotxes",
+ "cs": "nabíjecí stanice pro auta",
+ "de": "Ladestation für Autos",
+ "es": "punto de carga para coches"
+ }
+ }
+ ],
"filter": [
{
"id": "vehicle-type",
@@ -3384,19 +3385,6 @@
]
}
],
- "deletion": {
- "softDeletionTags": {
- "and": [
- "amenity=",
- "disused:amenity=charging_station"
- ]
- },
- "neededChangesets": 10
- },
- "allowMove": {
- "enableRelocation": false,
- "enableImproveAccuracy": true
- },
"units": [
{
"maxstay": {
@@ -3591,5 +3579,17 @@
}
}
],
- "#": "no-question-hint-check"
-}
+ "allowMove": {
+ "enableRelocation": false,
+ "enableImproveAccuracy": true
+ },
+ "deletion": {
+ "softDeletionTags": {
+ "and": [
+ "amenity=",
+ "disused:amenity=charging_station"
+ ]
+ },
+ "neededChangesets": 10
+ }
+}
\ No newline at end of file
diff --git a/assets/layers/shops/shops.json b/assets/layers/shops/shops.json
index 52823433e..dd990d24e 100644
--- a/assets/layers/shops/shops.json
+++ b/assets/layers/shops/shops.json
@@ -1294,6 +1294,7 @@
}
}
},
+ "dog-access",
"description"
],
"filter": [
@@ -1319,7 +1320,8 @@
}
]
},
- "filters.has_organic"
+ "filters.has_organic",
+ "dogs"
],
"deletion": {
"softDeletionTags": {
diff --git a/assets/layers/usersettings/usersettings.json b/assets/layers/usersettings/usersettings.json
index 660cda4e2..a419419a8 100644
--- a/assets/layers/usersettings/usersettings.json
+++ b/assets/layers/usersettings/usersettings.json
@@ -576,20 +576,28 @@
"mappings": [
{
"if": "mapcomplete-show_crosshair=yes",
- "then": "Show a crosshair in the center of the map when zoomed in above level 17"
+ "then": {
+ "en": "Show a crosshair in the center of the map when zoomed in above level 17"
+ }
},
{
"if": "mapcomplete-show_crosshair=no",
- "then": "Do not show a crosshair in the center of the map"
+ "then": {
+ "en": "Do not show a crosshair in the center of the map"
+ }
},
{
"if": "mapcomplete-show_crosshair=",
- "then": "Do not show a crosshair in the center of the map",
+ "then": {
+ "en": "Do not show a crosshair in the center of the map"
+ },
"hideInAnswer": true
},
{
"if": "mapcomplete-show_crosshair=always",
- "then": "Always show a crosshair in the center of the map"
+ "then": {
+ "en": "Always show a crosshair in the center of the map"
+ }
}
]
},
@@ -1147,7 +1155,9 @@
"label": [
"translations"
],
- "render": "
Translating MapComplete
"
+ "render": {
+ "en": "
Translating MapComplete
"
+ }
},
{
"label": [
diff --git a/assets/themes/cyclestreets/cyclestreets.json b/assets/themes/cyclestreets/cyclestreets.json
index c42529f7b..f1218d671 100644
--- a/assets/themes/cyclestreets/cyclestreets.json
+++ b/assets/themes/cyclestreets/cyclestreets.json
@@ -108,7 +108,8 @@
"cs": "Cyklostezka je ulice, kde motorová doprava nesmí předjíždět cyklisty",
"ca": "Un ciclocarrer és un carrer on el trànsit motoritzat no pot sobrepassar a un ciclista",
"pl": "Ulica rowerowa to ulica, na której pojazdy zmotoryzowane nie mogą wyprzedzać rowerzystów",
- "ko": "자전거 전용 도로는 차량이 자전거를 추월할 수 없는 도로 입니다"
+ "ko": "자전거 전용 도로는 차량이 자전거를 추월할 수 없는 도로 입니다",
+ "zh_Hant": "單車街道是機動車輛不被允許超車單車"
},
"title": "{name}",
"tagRenderings": [
@@ -220,7 +221,8 @@
"cs": "Tato ulice se brzy stane cyklostezkou",
"ca": "Aquest carrer es convertirà en un ciclocarrer pròximament",
"pl": "Ta ulica wkrótce stanie się ulicą rowerową",
- "ko": "이 도로는 곧 자전거 전용 도로로 전환될 예정입니다"
+ "ko": "이 도로는 곧 자전거 전용 도로로 전환될 예정입니다",
+ "zh_Hant": "這條道路即將成為單車街道"
},
"minzoom": 9,
"source": {
@@ -267,7 +269,8 @@
"ca": "{name} es convertirà en un ciclocarrer pròximament",
"eu": "{name} laster bidegorri bihurtuko da",
"pl": "{name} wkrótce stanie się ulicą rowerową",
- "ko": "{name} 는 곧 자전거 전용 도로로 전환될 예정입니다"
+ "ko": "{name} 는 곧 자전거 전용 도로로 전환될 예정입니다",
+ "zh_Hant": "{name} 不久會變成單車街道"
},
"if": "name~*"
}
@@ -345,7 +348,8 @@
"cs": "Vrstva pro označení jakékoli ulice jako cyklostezky",
"ca": "Capa per a marcar qualsevol carrer com a ciclocarrer",
"pl": "Warstwa oznaczająca dowolną ulicę jako ulicę rowerową",
- "ko": "자전거 전용 도로로 표시할 도로를 지정하는 레이어"
+ "ko": "자전거 전용 도로로 표시할 도로를 지정하는 레이어",
+ "zh_Hant": "標記任何道路都是單車街道的圖層"
},
"source": {
"osmTags": {
@@ -450,7 +454,8 @@
"cs": "Je ulice {name} cyklo ulicí?",
"ca": "El carrer {name} és un ciclocarrer?",
"pl": "Czy ulica {name} jest ulicą rowerową?",
- "ko": "이 도로는 {name} 자전거 전용 도로인가요?"
+ "ko": "이 도로는 {name} 자전거 전용 도로인가요?",
+ "zh_Hant": "這條道路{name}是單車街道嗎?"
},
"mappings": [
{
@@ -476,7 +481,8 @@
"cs": "Tato ulice je cyklostezkou (s omezením rychlosti na 30 km/h)",
"ca": "Aquest carrer és un ciclocarrer (i té un límit de velocitat de 30km/h)",
"pl": "Ta ulica jest ulicą rowerową (na której obowiązuje ograniczenie prędkości do 30 km/h)",
- "ko": "이 도로는 자전거 전용 도로입니다 (제한 속도는 시속 30km입니다)"
+ "ko": "이 도로는 자전거 전용 도로입니다 (제한 속도는 시속 30km입니다)",
+ "zh_Hant": "這條道路是單車街道 (而且有速限30km/h)"
},
"hideInAnswer": "_country!=be"
},
@@ -492,7 +498,8 @@
"es": "Esta calle tiene ciclovías",
"pl": "To jest droga dla rowerów",
"it": "Questa strada è una strada per biciclette",
- "ko": "이 도로는 자전거 도로 입니다"
+ "ko": "이 도로는 자전거 도로 입니다",
+ "zh_Hant": "這條道路是單車街道"
},
"hideInAnswer": true
},
@@ -572,7 +579,8 @@
"da": "Denne gade bliver snart en cykelgade",
"cs": "Tato ulice se brzy stane cyklostezkou",
"pl": "Ta ulica wkrótce stanie się ulicą rowerową",
- "ko": "이 도로는 곧 자전거 도로로 전환될 예정입니다"
+ "ko": "이 도로는 곧 자전거 도로로 전환될 예정입니다",
+ "zh_Hant": "這條道路即將成為單車街道"
},
"hideInAnswer": "_country=de"
},
@@ -592,7 +600,8 @@
"es": "Esta calle se convertirá pronto en una vía ciclista",
"ca": "Aquest carrer es convertirà aviat en una senda ciclable",
"pl": "Już niedługo ta ulica stanie się drogą rowerową",
- "ko": "이 도로는 곧 자전거 도로로 전환될 예정입니다"
+ "ko": "이 도로는 곧 자전거 도로로 전환될 예정입니다",
+ "zh_Hant": "這條道路即將成為單車道路"
},
"hideInAnswer": "_country!=de"
},
@@ -620,7 +629,8 @@
"cs": "Tato ulice není cyklo ulicí",
"ca": "Aquest carrer no és un ciclocarrer",
"pl": "Ta ulica nie jest ulicą rowerową",
- "ko": "이 도로는 자전거 전용 도로가 아닙니다"
+ "ko": "이 도로는 자전거 전용 도로가 아닙니다",
+ "zh_Hant": "這條道路並非單車街道"
}
}
]
@@ -658,7 +668,8 @@
"pl": "Mieszkańcy dopuszczeni",
"da": "Beboere tilladt",
"it": "Permesso l'accesso ai residenti",
- "ko": "거주자 허용"
+ "ko": "거주자 허용",
+ "zh_Hant": "允許居民通行"
},
"icon": {
"path": "./assets/themes/cyclestreets/Zeichen_244_1020-30.svg",
@@ -684,7 +695,8 @@
"pl": "Pojazdy silnikowe dozwolone",
"da": "Motorkøretøjer tilladt",
"it": "Permesso l'accesso ai veicoli a motore",
- "ko": "차량 허용"
+ "ko": "차량 허용",
+ "zh_Hant": "允許機動車輛通行"
},
"icon": {
"path": "./assets/themes/cyclestreets/Zeichen_244_KFZ_frei.svg",
@@ -711,7 +723,8 @@
"pl": "Motocykle dozwolone",
"da": "Motorcykler tilladt",
"it": "Permesso l'accesso ai motocicli",
- "ko": "오토바이 허용"
+ "ko": "오토바이 허용",
+ "zh_Hant": "允許機車通行"
},
"icon": {
"path": "./assets/themes/cyclestreets/Zeichen_244_1022-12.svg",
@@ -739,7 +752,8 @@
"pl": "Samochody dozwolone",
"da": "Biler tilladt",
"it": "Permesso l'accesso alle auto",
- "ko": "자동차 허용"
+ "ko": "자동차 허용",
+ "zh_Hant": "允許汽車通行"
},
"icon": {
"path": "./assets/themes/cyclestreets/Zeichen_244_1024-10.svg",
diff --git a/assets/themes/mapcomplete-changes/mapcomplete-changes.json b/assets/themes/mapcomplete-changes/mapcomplete-changes.json
index 30302be82..e3ffb4d2e 100644
--- a/assets/themes/mapcomplete-changes/mapcomplete-changes.json
+++ b/assets/themes/mapcomplete-changes/mapcomplete-changes.json
@@ -9,6 +9,15 @@
"nl": "Wijzigingen gemaakt met MapComplete",
"ko": "MapComplete로 이루어진 변경 사항"
},
+ "shortDescription": {
+ "en": "Shows changes made by MapComplete",
+ "de": "Zeigt die von MapComplete vorgenommenen Änderungen an",
+ "cs": "Zobrazuje změny provedené nástrojem MapComplete",
+ "es": "Muestra los cambios realizados por MapComplete",
+ "fr": "Afficher les modifications faites avec MapComplete",
+ "nl": "Toont wijzigingen gemaakt met MapComplete",
+ "ko": "MapComplete를 통해 이루어진 변경 사항을 표시합니다"
+ },
"description": {
"en": "This maps shows all the changes made with MapComplete",
"de": "Diese Karte zeigt alle mit MapComplete vorgenommenen Änderungen",
@@ -19,17 +28,11 @@
"nl": "Deze kaarten tonen alle wijzigingen die zijn gemaakt met MapComplete",
"ko": "이 지도는 MapComplete를 사용하여 이루어진 모든 변경 사항을 표시합니다"
},
- "shortDescription": {
- "en": "Shows changes made by MapComplete",
- "de": "Zeigt die von MapComplete vorgenommenen Änderungen an",
- "cs": "Zobrazuje změny provedené nástrojem MapComplete",
- "es": "Muestra los cambios realizados por MapComplete",
- "fr": "Afficher les modifications faites avec MapComplete",
- "nl": "Toont wijzigingen gemaakt met MapComplete",
- "ko": "MapComplete를 통해 이루어진 변경 사항을 표시합니다"
- },
"icon": "./assets/svg/logo.svg",
"hideFromOverview": true,
+ "startLat": 0,
+ "startLon": 0,
+ "startZoom": 1,
"layers": [
{
"id": "mapcomplete-changes",
diff --git a/assets/themes/maps/maps.json b/assets/themes/maps/maps.json
index e74b07bcd..07eb7c9bf 100644
--- a/assets/themes/maps/maps.json
+++ b/assets/themes/maps/maps.json
@@ -32,7 +32,8 @@
"cs": "Na této mapě najdete všechny mapy, které OpenStreetMap zná - typicky je zde velká mapa na informační tabuli zobrazující oblast, město nebo region, (např. turistická mapa na zadní straně billboardu, mapa přírodní rezervace, mapa cyklistických sítí v regionu, ...).
Pokud mapa chybí, můžete ji snadno zmapovat na OpenStreetMap.",
"ca": "En aquest mapa podeu trobar tots els mapes que OpenStreetMap coneix, normalment un mapa gran en un tauler informatiu que mostra la zona, la ciutat o la regió, p. un mapa turístic al dors d'una tanca publicitària, un mapa d'una reserva natural, un mapa de les xarxes ciclistes de la regió, ...)
Si falta un mapa, podeu mapejar aquest mapa fàcilment a OpenStreetMap.",
"pl": "Na tej mapie możesz znaleźć wszystkie mapy, jakie zna OpenStreetMap - zazwyczaj duże mapy na tablicy informacyjnej pokazująca obszar, miasto lub region, np. mapy turystyczne na odwrocie billboardu, mapy rezerwatu przyrody, mapy sieci rowerowych w regionie, ...)
Jeśli brakuje mapy, możesz łatwo zmapować ją na OpenStreetMap.",
- "ko": "이 지도에서는 OpenStreetMap에서 확인 가능한 모든 지도를 찾을수 있습니다. 일반적으로 장소, 도시 또는 지역을 보여주는 정보 게시판의 대형 지도(예: 관광지의 안내판 뒷면에 있는 지도, 자연 보호구역 지도, 지역 자전거 네트워크 지도 등)가 포함됩니다.
만약 누락된 지도가 있다면 OpenStreetMap에서 손쉽게 추가할 수 있습니다."
+ "ko": "이 지도에서는 OpenStreetMap에서 확인 가능한 모든 지도를 찾을수 있습니다. 일반적으로 장소, 도시 또는 지역을 보여주는 정보 게시판의 대형 지도(예: 관광지의 안내판 뒷면에 있는 지도, 자연 보호구역 지도, 지역 자전거 네트워크 지도 등)가 포함됩니다.
만약 누락된 지도가 있다면 OpenStreetMap에서 손쉽게 추가할 수 있습니다.",
+ "uk": "На цій карті ви можете знайти всі карти, які знає OpenStreetMap - зазвичай це велика карта на інформаційному щиті, на якій показано місцевість, місто чи регіон, напр. туристична карта на зворотному боці рекламного щита, карта природного заповідника, карта велосипедних мереж регіону, ...)
Якщо карта відсутня, ви можете легко нанести на неї карту на OpenStreetMap."
},
"shortDescription": {
"en": "This theme shows all (touristic) maps that OpenStreetMap knows of",
diff --git a/assets/themes/pets/pets.json b/assets/themes/pets/pets.json
index e4d1304c9..0b024ebf9 100644
--- a/assets/themes/pets/pets.json
+++ b/assets/themes/pets/pets.json
@@ -40,10 +40,12 @@
],
"layers": [
"dogpark",
+ "veterinary",
+ "animal_shelter",
{
"builtin": "food",
"override": {
- "id": "dogfoodb",
+ "id": "food_dog_friendly",
"name": {
"en": "Dog friendly eateries",
"da": "Hundevenlige madsteder",
@@ -62,28 +64,15 @@
},
"pointRendering": [
{
- "location": [
- "point",
- "centroid"
- ],
- "marker": [
- {
- "icon": "./assets/themes/pets/dog-food.svg"
- }
- ],
- "iconSize": "30,30"
+ "iconBadges+": [
+ "icons.dogicon"
+ ]
}
],
"=presets": [],
"source": {
- "=osmTags": {
- "and": [
- {
- "or": [
- "amenity=restaurant",
- "amenity=cafe"
- ]
- },
+ "osmTags": {
+ "and+": [
{
"or": [
"dog=unleashed",
@@ -97,10 +86,20 @@
}
},
{
- "builtin": "shops",
- "id": "dogshop",
+ "builtin": "food",
"override": {
- "id": "dogshop",
+ "minzoom": 18,
+ "isCounted": false,
+ "filter": {
+ "sameAs": "food_dog_friendly"
+ },
+ "name": null
+ }
+ },
+ {
+ "builtin": "shops",
+ "override": {
+ "id": "shop_dog_friendly",
"name": {
"en": "Dog-friendly shops",
"da": "hundevenlig butik",
@@ -117,77 +116,21 @@
"it": "Negozi che accettano i cani",
"ko": "반려견 친화적 상점"
},
- "title": {
- "render": {
- "en": "Dog-friendly shops",
- "da": "hundevenlig butik",
- "de": "Hundefreundliche Geschäfte",
- "nb_NO": "Hundevennlige butikker",
- "nl": "Hondvriendelijke winkels",
- "fr": "Magasins acceptant les chiens",
- "ca": "Botigues amigues dels gossos",
- "pa_PK": "کُتیاں دی اِجازت دیاں دکاناں",
- "es": "Tiendas que admiten perros",
- "cs": "Obchody vhodné pro vstup se psy",
- "zh_Hant": "寵物友善商家",
- "pl": "Sklepy przyjazne psom",
- "it": "Negozi che accettano i cani",
- "hu": "Kutyabarát üzletek",
- "ko": "반려견 친화적 상점"
- },
- "mappings": [
- {
- "if": "name~*",
- "then": {
- "*": "{name}"
- }
- }
- ]
- },
"pointRendering": [
{
- "location": [
- "point",
- "centroid"
- ],
- "marker": [
- {},
- {
- "icon": {
- "render": "./assets/themes/pets/dogshop.svg",
- "+mappings": [
- {
- "if": {
- "and": [
- "shop=pet"
- ]
- },
- "then": "./assets/themes/pets/petshop.svg"
- }
- ]
- }
- }
- ],
- "iconSize": "30,30"
- }
- ],
- "=lineRendering": [
- {
- "#": "Rendering of a line",
- "color": "#ff0",
- "width": 5
+ "iconBadges+": [
+ "icons.dogicon"
+ ]
}
],
"=presets": [],
"source": {
- "=osmTags": {
- "and": [
- "shop~*",
+ "osmTags": {
+ "and+": [
{
"or": [
"dog=leashed",
- "dog=yes",
- "shop=pet"
+ "dog=yes"
]
}
]
@@ -195,12 +138,13 @@
}
}
},
- "veterinary",
{
- "builtin": "food",
+ "builtin": "shops",
"override": {
"minzoom": 18,
- "filter": null,
+ "filter": {
+ "sameAs": "shop_dog_friendly"
+ },
"name": null
}
},
@@ -211,51 +155,6 @@
"filter": null,
"name": null
}
- },
- {
- "builtin": "shops",
- "override": {
- "minzoom": 18,
- "filter": null,
- "presets": [
- {
- "title": {
- "en": "dog-friendly shop",
- "da": "EN hundevenlig butik",
- "de": "hundefreundliches Geschäft",
- "nb_NO": "hundevennlig butikk",
- "nl": "Hondvriendelijke winkels",
- "fr": "magasin acceptant les chiens",
- "ca": "botiga amiga dels gossos",
- "pa_PK": "کُتیاں دی اِجازت دی دکان",
- "es": "tienda que admite perros",
- "cs": "obchod vhodný pro vstup se psem",
- "zh_Hant": "寵物友善商家",
- "pl": "sklep przyjazny psom",
- "ko": "반려견 친화적 상점"
- },
- "tags": [
- "dog=yes",
- "shop=yes"
- ],
- "description": {
- "en": "A shop where you can bring a dog almost everywhere",
- "da": "En butik hvor man kan tage en hund med næsten overalt",
- "de": "Ein Geschäft, in das man Hunde fast überall mitnehmen kann",
- "nl": "Een winkel waar je je hond in bijna overal mag meenemen",
- "fr": "Un magasin où vous pouvez amener votre chien presque partout",
- "ca": "Una botiga on pots dur al gos gairebé a tot arreu",
- "es": "Una tienda donde puedes llevar a un perro casi a todas partes",
- "cs": "Obchod, ve kterém si můžete vzít psa téměř kamkoli",
- "zh_Hant": "你幾乎可以攜帶寵物到處去的商店",
- "pl": "Sklep, w którym niemal wszędzie można zabrać psa",
- "ko": "반려견과 함께할 수 있는 상점"
- }
- }
- ],
- "name": null
- }
- },
- "animal_shelter"
+ }
]
}
diff --git a/assets/themes/trees/trees.json b/assets/themes/trees/trees.json
index cf60be8be..e43bd3330 100644
--- a/assets/themes/trees/trees.json
+++ b/assets/themes/trees/trees.json
@@ -61,7 +61,8 @@
"da": "Kortlæg alle træer",
"cs": "Zmapujte všechny stromy",
"uk": "Додайте на мапу всі дерева",
- "ko": "모든 나무 관련 지도"
+ "ko": "모든 나무 관련 지도",
+ "pt": "Mapeie todas as árvores"
},
"icon": "./assets/themes/trees/logo.svg",
"socialImage": "./assets/themes/trees/logo.svg",
diff --git a/langs/de.json b/langs/de.json
index 7c9665833..02bb5e74f 100644
--- a/langs/de.json
+++ b/langs/de.json
@@ -616,28 +616,28 @@
"title": "MapComplete"
},
"inspector": {
- "menu": "Überprüfe einen Beitragenden",
+ "aggregateView": "Zusammenfassen",
+ "answeredCountTimes": "{count} mal beantwortet",
"backToIndex": "Zurück zur Kartenübersicht",
"createdBy": "Erstellt von {contributor}",
+ "earlierInspected": "Sieh dir Mitwirkende an, die du bereits überprüft hast",
"images": "Erstellte Bilder",
"load": "Änderungen für Kartenbereich prüfen",
"mapView": "Karte",
+ "menu": "Überprüfe einen Beitragenden",
"onlyGeometry": "Nur geometrische Veränderungen",
"previouslySpied": {
+ "addLabel": "Ein Label hinzufügen",
+ "allChanges": "Lade alle Änderungen für Benutzer mit diesem Label",
+ "label": "Label",
+ "noLabels": "Keine Labels",
"remove": "Entfernen",
"time": "Zeitpunkt der letzten Überprüfung",
"title": "Zuvor geprüfte Beitragende",
- "username": "Benutzername",
- "allChanges": "Lade alle Änderungen für Benutzer mit diesem Label",
- "addLabel": "Ein Label hinzufügen",
- "label": "Label",
- "noLabels": "Keine Labels"
+ "username": "Benutzername"
},
"tableView": "Übersicht",
- "answeredCountTimes": "{count} mal beantwortet",
- "earlierInspected": "Sieh dir Mitwirkende an, die du bereits überprüft hast",
- "title": "Überprüfe einen Mitwirkenden",
- "aggregateView": "Zusammenfassen"
+ "title": "Überprüfe einen Mitwirkenden"
},
"move": {
"cancel": "Einen anderen Grund auswählen",
@@ -873,4 +873,4 @@
"startsWithQ": "Ein Wikidata-Identifikator beginnt mit Q und wird von einer Zahl gefolgt"
}
}
-}
+}
\ No newline at end of file
diff --git a/langs/layers/de.json b/langs/layers/de.json
index 675cba123..9922c6974 100644
--- a/langs/layers/de.json
+++ b/langs/layers/de.json
@@ -9440,6 +9440,24 @@
"render": "Schule {name}"
}
},
+ "scouting_group": {
+ "name": "Pfadfinder:innenstämme",
+ "presets": {
+ "0": {
+ "title": "Pfadfinder:innenstamm"
+ }
+ },
+ "tagRenderings": {
+ "association": {
+ "question": "Zu welchem Verband/Bund gehört {name}",
+ "render": "Dieser Stamm ist im Verband {brand}"
+ },
+ "name": {
+ "question": "Was ist der Stammesname?",
+ "render": "Dieser Stamm heißt {name}"
+ }
+ }
+ },
"search": {
"description": "Priorisierte Ebene, die Suchergebnissen anzeigt",
"tagRenderings": {
@@ -10091,6 +10109,12 @@
},
"1": {
"title": "einen Sportplatz"
+ },
+ "2": {
+ "title": "einen Skatepark"
+ },
+ "3": {
+ "title": "einen Reitplatz"
}
},
"tagRenderings": {
@@ -12792,4 +12816,4 @@
"render": "Windrad"
}
}
-}
+}
\ No newline at end of file
diff --git a/langs/layers/en.json b/langs/layers/en.json
index 74f998ae4..2c498d77b 100644
--- a/langs/layers/en.json
+++ b/langs/layers/en.json
@@ -4486,6 +4486,26 @@
"question": "Is this drinking water point available all year round?"
}
},
+ "temperature-cold": {
+ "mappings": {
+ "0": {
+ "then": "Ice-cold water is provided here"
+ },
+ "1": {
+ "then": "Actively cooled water is available here"
+ },
+ "2": {
+ "then": "Ambient temperature water (without active cooling or heating) is available here"
+ },
+ "3": {
+ "then": "Warmed water is provided here; the water is not dangerously hot"
+ },
+ "4": {
+ "then": "Hot water is provided here"
+ }
+ },
+ "question": "Is cold water available here?"
+ },
"type": {
"mappings": {
"0": {
@@ -9572,6 +9592,28 @@
"render": "School {name}"
}
},
+ "scouting_group": {
+ "description": "A map showing scouting groups.",
+ "name": "Scouting groups",
+ "presets": {
+ "0": {
+ "title": "scouting group"
+ }
+ },
+ "tagRenderings": {
+ "association": {
+ "question": "To which scout association does {name} belong?",
+ "render": "The scout association of this group is {brand}"
+ },
+ "name": {
+ "question": "What is the name of this group?",
+ "render": "The name of this group is {name}"
+ }
+ },
+ "title": {
+ "render": "{name}"
+ }
+ },
"search": {
"description": "Priviliged layer showing the search results",
"tagRenderings": {
@@ -9759,6 +9801,11 @@
"then": "Bicycle rental shop"
}
},
+ "mappings+": {
+ "0": {
+ "then": "This shop is no longer used. It is vacant"
+ }
+ },
"question": "What kind of shop is this?",
"render": "This is a {shop}"
}
@@ -10234,6 +10281,12 @@
},
"1": {
"title": "a sport pitch"
+ },
+ "2": {
+ "title": "a skatepark"
+ },
+ "3": {
+ "title": "a horse riding arena"
}
},
"tagRenderings": {
@@ -13342,4 +13395,4 @@
"render": "wind turbine"
}
}
-}
+}
\ No newline at end of file
diff --git a/langs/layers/es.json b/langs/layers/es.json
index 31a4c9dce..db6281c6a 100644
--- a/langs/layers/es.json
+++ b/langs/layers/es.json
@@ -10056,6 +10056,12 @@
},
"1": {
"title": "una cancha deportiva"
+ },
+ "2": {
+ "title": "un skatepark"
+ },
+ "3": {
+ "title": "una pista ecuestre"
}
},
"tagRenderings": {
diff --git a/langs/layers/nl.json b/langs/layers/nl.json
index 574cd26ee..c9d719b05 100644
--- a/langs/layers/nl.json
+++ b/langs/layers/nl.json
@@ -4344,6 +4344,26 @@
"question": "Is dit drinkwaterpunt heel het jaar door beschikbaar?"
}
},
+ "temperature-cold": {
+ "mappings": {
+ "0": {
+ "then": "Ijskoud water is hier beschikbaar"
+ },
+ "1": {
+ "then": "Afgekoeld water is hier beschikbaar"
+ },
+ "2": {
+ "then": "Water aan omgevingstemperatuur (zonder actieve koeling of opwarming) is hier beschikbaar"
+ },
+ "3": {
+ "then": "Warm water is hier beschikbaar; het water is niet gevaarlijk heet"
+ },
+ "4": {
+ "then": "Heet water is hier beschikbaar"
+ }
+ },
+ "question": "Is gekoeld water hier beschikbaar?"
+ },
"type": {
"mappings": {
"0": {
@@ -8297,6 +8317,11 @@
"then": "Fietsverhuurzaak"
}
},
+ "mappings+": {
+ "0": {
+ "then": "Deze winkel staat leeg"
+ }
+ },
"question": "Wat voor soort winkel is dit?",
"render": "Dit is een {shop}"
}
diff --git a/langs/themes/en.json b/langs/themes/en.json
index e5f5d1690..2977f1914 100644
--- a/langs/themes/en.json
+++ b/langs/themes/en.json
@@ -1177,6 +1177,10 @@
"description": "On this map, rainbow-painted pedestrian crossings are shown and can be easily added",
"title": "Rainbow pedestrian crossings"
},
+ "scouting": {
+ "description": "A scouting group is a social youth movement with a heavy emphasis on the outdoors. Activities range from camping, hiking, aquatics, backpacking, exploring nature, ...",
+ "title": "Scouting groups"
+ },
"shops": {
"description": "On this map, one can mark basic information about shops, add opening hours and phone numbers",
"shortDescription": "An editable map with basic shop information",
diff --git a/langs/themes/pt.json b/langs/themes/pt.json
index aa8c3000d..bbadc40b8 100644
--- a/langs/themes/pt.json
+++ b/langs/themes/pt.json
@@ -34,7 +34,7 @@
},
"trees": {
"description": "Mapeie todas as árvores!",
- "title": "Árvores",
- "shortDescription": "Mapeie todas as árvores"
+ "shortDescription": "Mapeie todas as árvores",
+ "title": "Árvores"
}
-}
+}
\ No newline at end of file
diff --git a/langs/themes/uk.json b/langs/themes/uk.json
index 2238266c3..00a76a057 100644
--- a/langs/themes/uk.json
+++ b/langs/themes/uk.json
@@ -462,9 +462,9 @@
"title": "Маяки"
},
"maps": {
+ "description": "На цій карті ви можете знайти всі карти, які знає OpenStreetMap - зазвичай це велика карта на інформаційному щиті, на якій показано місцевість, місто чи регіон, напр. туристична карта на зворотному боці рекламного щита, карта природного заповідника, карта велосипедних мереж регіону, ...)
Якщо карта відсутня, ви можете легко нанести на неї карту на OpenStreetMap.",
"shortDescription": "Ця тема показує всі (туристичні) мапи, які відомі OpenStreetMap",
- "title": "Мапа мап",
- "description": "На цій карті ви можете знайти всі карти, які знає OpenStreetMap - зазвичай це велика карта на інформаційному щиті, на якій показано місцевість, місто чи регіон, напр. туристична карта на зворотному боці рекламного щита, карта природного заповідника, карта велосипедних мереж регіону, ...)